Federal Specification

Documents

• GGG-B-00590 – BOXES, TOOL, MECHANICS (S/S BY GGG-T-558)
• GGG-B-0060 – Bag, Tool Satchel (No S/S Document)
• GGG-B-00690 – Brazing and Soldering Set (Acetylene Gas) (S/S by A-A-51138)
• GGG-B-101/(an interim revision also exists for this document number as GGG-B-00101E NOT 1) – BAR, CHISEL, PINCH, PRY, WRECKING, DIGGING, TAMPING, DIGGING AND TAMPING, AND CROWBARS (S/S BY A-A-2562, A-A-2563, A-A-2564, A-A-2565, A-A-2566, A-A-2567, A-A-2568 AND A-A-2879)
• GGG-B-110 – BAR, COMBINATION PRY AND SCRAPER (S/S BY A-A-2881)
• GGG-B-121 – Bar, Sine, Plate Sine (and Fixtures)
• GGG-B-175 – BENDER, ELECTRICAL CONDUIT, HAND (PORTABLE) (NO S/S DOCUMENT)
• GGG-B-191 – BENDER, TUBE, HAND, (PORTABLE) (NO S/S DOCUMENT)
• GGG-B-211 – BEVEL, SLIDING T, UNIVERSAL AND SHIP CARPENTERS
• GGG-B-325/(an interim revision also exists for this document number as GGG-B-00325C NOT 1) – Binder, Load
• GGG-B-351 – Bin, Storage and Display, Rotary
• GGG-B-376 – BIT, SCREW-DRIVER, (TAPERED SQUARE SHANK, FLAT TIP AND CROSS TIP) (NO S/S DOCUMENT)
• GGG-B-383 – BITS, WOOD-BORING; AND CHISELS, MORTISING, HOLLOW (NO S/S DOCUMENT)
• GGG-B-421 – BLADE, BAND SAW WOOD CUTTING, METAL CUTTING & MEAT CUTTING
• GGG-B-425 – BLADE, RECIPROCATING SAW (S/S BY A-A-3088 AND A-A-3089)
• GGG-B-431/(an interim revision also exists for this document number as GGG-B-00431B NOT 0) – BLADES, SAW, ROUND (MACHINE AND HAND) (S/S BY A-A-51156)
• GGG-B-440 – Blade, Circular Saw, Woodcutting
• GGG-B-445 – BLADE, CIRCULAR SAW, WOODWORKING (TUNGSTEN CARBIDE TIPPED, GENERAL PURPOSE) (NO S/S DOCUMENT)
• GGG-B-451 – Blade, Hand Hacksaw and Blade, Power Hacksaw (S/S by ASME-B94.52M)
• GGG-B-461 – Block, Step, Machinists (No S/S Document)
• GGG-B-471 – Blade, Coping Saw, and Blade, Jewelers Saw
• GGG-B-481 – BLOCK, DOLLY, SHEET METAL (S/S BY A-A-3017)
• GGG-B-485 – Block, Tackle, Wire Rope, with Swivel Hook, (for Crane Use) (No S/S Document)
• GGG-B-490 – Blocks, Tackle (Manila and Nylon Rope) (See Notice 1 for Replacement Information)
• GGG-B-50 – BAG, LINEMAN'S TOOL, ROUND (NO S/S DOCUMENT)
• GGG-B-500 – Block, Tackle, (Wire-Rope)
• GGG-B-550 – BLOWTORCH, ALCOHOL AND GASOLINE, HAND
• GGG-B-671 – Brace, Bit, Ratchet, Brace, Corner, and Extensions, Bit
• GGG-B-785 – Burnishers, Contact, Hand (and Blades) (No S/S Document)
• GGG-B-800 – BUSH HOOKS, HAND (S/S BY A-A-970)
• GGG-C-00116/(the base document for this interim revision is GGG-C-116B(2) NOT 1) – CASE, TWIST DRILL; AND STAND, TWIST DRILL (NO S/S DOCUMENT)
• GGG-C-00137/(the base document for this interim revision is GGG-C-137A NOT 1) – CAPS, VISE JAW (S/S BY A-A-2938)
• GGG-C-00413 – CLAMPING TOOL, STRAP BAND, HOSE (S/S BY A-A-2591)
• GGG-C-00420 – Cleaner, Pipeline, Air Pressure, and Cleaning Kit, Pipeline, Air Pressure Accessories (S/S by MIL-C-18457)
• GGG-C-00555 – COMPRESSOR, PISTON RING, BAND-TYPE (S/S BY A-A-3038)
• GGG-C-00640 – Crimping Tool, Terminal, Hand (Ignition Cable) (No S/S Document)
• GGG-C-00835 – CUTTER, STEEL STRAPPING (NO S/S DOCUMENT)
• GGG-C-105 – Caliper, Micrometer (Inside, Outside, Tube) and Gage, Depth, Micrometer (No S/S Document)
• GGG-C-111 – CALIPERS AND GAGES, VERNIER (NO S/S DOCUMENT)
• GGG-C-116/(an interim revision also exists for this document number as GGG-C-00116D NOT 1) – CASE, TWIST DRILL; AND STAND, TWIST DRILL (NO S/S DOCUMENT)
• GGG-C-120 – CALKING GUN, BULK AND CARTRIDGE COMPOUNDS (NO S/S DOCUMENT)
• GGG-C-135 – CALKING TOOL, HAND (NO S/S DOCUMENT)
• GGG-C-137/(an interim revision also exists for this document number as GGG-C-00137B NOT 1) – CAP, VISE JAW (S/S BY A-A-2938)
• GGG-C-1507 – Crowfoot Attachment, Socket Wrench (No S/S Document)
• GGG-C-1520 – CARRIER TOOL (NO S/S DOCUMENT)
• GGG-C-1878 – Domestic (Household) Compactor (No S/S Document)
• GGG-C-1968 – CARRIERS, STORAGE BATTERY, HAND (NO S/S DOCUMENT)
• GGG-C-2773 – CYLINDER RECONDITIONING AND CORRECTION EQUIPMENT: PORTABLE (NO S/S DOCUMENT)
• GGG-C-2794 – Cups, Oil, Lubricating, and Oilers, Self-Feeding, General Specification for
• GGG-C-2794/1 – Cups, Oil, Lubricating and Oilers, Self Feeding, Type A Screw Cap
• GGG-C-2794/2 – Cups, Oil, Lubricating and Oilers, Self Feeding, Type B Spring Cap (No S/S Document)
• GGG-C-2794/3 – Cups, Oil, Lubricating and Oilers, Self Feeding, Cylindrical, Slotted Cap (No S/S Document)
• GGG-C-2794/4 – Cups, Oil, Lubricating and Oilers, Self Feeding, Hinged Cap (No S/S Document)
• GGG-C-2794/5 – Cups, Oil, Lubricating and Oilers, Self Feeding, with Sight Feed (No S/S Document)
• GGG-C-2794/6 – Cups, Oil, Lubricating and Oilers, Self Feeding, Ball Valve, Straight or Shoulder
• GGG-C-2794/7 – Cups, Oil, Lubricating and Oilers, Self Feeding, Small Elbow
• GGG-C-291 – Chalk Line and Reel (Self-Chalking)
• GGG-C-311 – CHISELS AND GOUGES, WOODWORKING (NO S/S DOCUMENT)
• GGG-C-313 – CHISEL, HAND, CAPE, DIAMOND POINT, COLD, ROUND NOSE, AND SIDE CUTTING (NO S/S DOCUMENT)
• GGG-C-315 – CHISEL, BRICK (S/S BY A-A-2880)
• GGG-C-330 – Chisel, Tool Blank, Calking Tool and Metal-Forming Tool, Power Hammer (S/S by A-A-3090 and A-A-3091)
• GGG-C-350 – Chucks, Drill; Arbors, Adapters and Keys, Drill Chuck (S/S by A-A-50966, A-A-50968, A-A-50969, A-A-50970, A-A-51124, A-A-51140)
• GGG-C-400 – CLAMP, BRAKE LINING
• GGG-C-406 – CLAMPS AND HAND SCREWS (NO S/S DOCUMENT)
• GGG-C-412 – Clamp, Material Lifting, (Plate, Horizontal Lift and Vertical Lift) (No S/S Document)
• GGG-C-414 – Clamp, Wire Splicing
• GGG-C-415 – Claw, Tack
• GGG-C-430 – Cleaner, Valve, Stem Guide
• GGG-C-441 – CLIPPERS, BOLT (S/S BY GGG-C-740)
• GGG-C-475 – CLIPPERS, HAIR, HAND
• GGG-C-520 – CLOTH AND DISKS, ABRASIVE, OPEN MESH, WATERPROOF (S/S BY ANSI-B74.18)
• GGG-C-555/(an interim revision also exists for this document number as GGG-C-00555B(2) NOT 2) – COMPRESSOR, PISTON RING, BAND TYPE (S/S BY A-A-3038)
• GGG-C-571 – Coppers (Irons), Soldering (S/S by GGG-S-595)
• GGG-C-589 – CORK PRESSERS, ROTARY (NO S/S DOCUMENT)
• GGG-C-591 – CORKSCREW
• GGG-C-613 – COUNTERSINKS, AND COUNTERSINKS AND DRILLS (NO S/S DOCUMENT)
• GGG-C-735 – CUTTER, ANGLE, HAND OPERATED (S/S BY A-A-2969)
• GGG-C-736 – CUTTER, ASBESTOS CEMENT SHINGLE, HAND OPERATED
• GGG-C-740/(an interim amendment also exists for this document number as GGG-C-740D(I 2)) – CUTTER, BOLT (S/S BY A-A-3047)
• GGG-C-740/(the base document for this interim amendment is GGG-C-740D NOT 1) – CUTTER, BOLT (S/S BY A-A-3047)
• GGG-C-743 – Cutters, Butter, Hand (No S/S Document)
• GGG-C-744 – CUTTER AND FLARING TOOL KIT, TUBE, HAND; CUTTER, FLARING AND BENDER TOOL KIT, TUBE HAND (NO S/S DOCUMENT)
• GGG-C-746 – Cutlery, Galley and Kitchen (Cleaver, Forks, Knives, Spatulas, Steel and Server) (S/S by A-A-2733)
• GGG-C-748 – CUTTER, CIRCLE (ADJUSTABLE); FOR GASKETS AND WASHERS (NO S/S DOCUMENT)
• GGG-C-749 – CUTTER, CABLE, HAND OPERATED (NO S/S DOCUMENT)
• GGG-C-750 – CUTTER, CABLE, HAND OPERATED, LIGHT DUTY (NO S/S DOCUMENT)
• GGG-C-751 – CUTTER, GLASS, WHEEL TYPE (FOR SHEET GLASS AND ROUND GAGE GLASS (S/S BY A-A-3024 AND A-A-3030)
• GGG-C-755 – Cutter, Milling (S/S by ANSI-B94.19)
• GGG-C-771 – CUTTERS, PIPE; AND CUTTERS, TUBE (NO S/S DOCUMENT)
• GGG-C-781 – Cutter, Rod, (Hand Operated) (No S/S Document)
• GGG-C-800 – CUTTER, WIRE ROPE, HAND OPERATED (S/S BY A-A-3029)
• GGG-C-835/(an interim revision also exists for this document number as GGG-C-00835B NOT 1) – CUTTER, STEEL STRAPPING (NO S/S DOCUMENT)
• GGG-C-95 – CALIPERS, GENERAL PURPOSE (NO S/S DOCUMENT)
• GGG-D-00340 – Disk, Abrasive, (Adhesive and Flexible Holder) (No S/S Document)
• GGG-D-00635 – DRESSER, ABRASIVE WHEEL (STICK-TYPE)
• GGG-D-00643 – Driftpin (Double Taper) (No S/S Document)
• GGG-D-00786 – DRIVERS, THREADED STUDS AND HEADED PINS (NO S/S DOCUMENT)
• GGG-D-2782 – DRIVE, POWER, PORTABLE; FOR PIPE AND BOLT THREADING, ELECTRIC (WITH ACCESSORIES) (S/S BY A-A-59247)
• GGG-D-280 – DIES, METAL STAMPING, HAND, STEEL, AND DIE SET, LEATHER STAMPING , HAND (LETTER AND NUMERAL) (NO S/S DOCUMENT)
• GGG-D-296 – DIE, THREADCUTTING AND RETHREADING, COLLET, THREADING DIE, AND DIESTOCK (BOLT AND SCREW THREADING, UNIFIED, AMERICAN NATIONAL AND METRIC FORM THREADS) (S/S BY A-A-411, A-A-412, A-A-413, A-A-414, AND A-A-415)