Federal Specification

Documents

• FF-B-171/31 – BEARING, BALL, ANNULAR, DOUBLE ROW, ANGULAR CONTACT, COUNTERBORED OUTER RING, CONTACT ANGLE ABOVE 32 DEG. UP TO AND INCLUDING 45 DEG., NON-SEPARABLE, ANSI/AFBMA DIMENSION SERIES 04 (S/S BY A-A-59635)
• FF-B-171/32 – BEARING, BALL, ANNULAR, DOUBLE ROW, ANGULAR CONTACT, NON-FILLING SLOT, VERTEX OF CONTACT ANGLES OUTSIDE BEARING, ANSI/AFBMA DIMENSION SERIES 32 (S/S BY A-A-59636)
• FF-B-171/33 – BEARING, BALL, ANNULAR, DOUBLE ROW, ANGULAR CONTACT, NON-FILLING SLOT, VERTEX OF CONTACT ANGLES OUTSIDE BEARING, ANSI/AFBMA DIMENSION SERIES 33 (S/S BY A-A-59637)
• FF-B-171/34 – BEARING, BALL, ANNULAR, DOUBLE ROW, ANGULAR CONTACT, NON-FILLING SLOT, VERTEX OF CONTACT ANGLES INSIDE BEARING, ANSI/AFBMA DIMENSION SERIES 32 (S/S BY A-A-59638)
• FF-B-171/35 – BEARING, BALL, ANNULAR, DOUBLE ROW, ANGULAR CONTACT, FILLING SLOT, VERTEX OF CONTACT ANGLES INSIDE BEARING, ANSI/AFBMA DIMENSION SERIES 33 (S/S BY A-A-59639)
• FF-B-171/36 – BEARING, BALL, ANNULAR, DOUBLE ROW, ANGULAR CONTACT, FILLING SLOT, VERTEX OF CONTACT ANGLES OUTSIDE BEARING, ANSI/AFBMA DIMENSION SERIES 32 (S/S BY A-A-59640)
• FF-B-171/37 – BEARING, BALL, ANNULAR, DOUBLE ROW, ANGULAR CONTACT, FILLING SLOT, VERTEX OF CONTACT ANGLES OUTSIDE BEARING, ANSI/AFBMA DIMENSION SERIES 33 (S/S BY A-A-59641)
• FF-B-171/4 – BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, ANSI/ABMA DIMENSION 02 (S/S BY A-A-59584)
• FF-B-171/5 – BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, ANSI/ABMA DIMENSION SERIES 03 (S/S BY A-A-59585)
• FF-B-171/6 – BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, ANSI/AFBMA DIMENSION SERIES 04 (S/S BY A-A-59586)
• FF-B-171/7 – BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, FILLING SLOT, ANSI/AFBMA DIMENSION SERIES 02 (S/S BY A-A-59587)
• FF-B-171/8 – BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, FILLING SLOT, ANSI/AFBMA DIMENSION SERIES 03 (S/S BY A-A-59589)
• FF-B-171/9 – BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL NON-FILLING SLOT, CARTRIDGE TYPE WITHOUT GREASE PLUG, ANSI/AFBMA DIMENSION SERIES 32 (S/S BY A-A-59595)
• FF-B-185 – Bearings, Roller, Cylindrical; and Bearings, Roller, Self-Aligning (S/S BY A-A-55598, A-A-55599, A-A-55600, A-A-55601 AND A-A-55602)
• FF-B-186 – Bearings, Roller (S/S by FF-B-185 and FF-B-187)
• FF-B-187 – BEARING, ROLLER, TAPERED (NO S/S DOCUMENT)
• FF-B-187/1 – BEARING, ROLLER, TAPERED, SINGLE ROW, NORMAL ANGLE (TYPE TS) (S/S BY A-A-59649)
• FF-B-187/10 – BEARING, ROLLER, TAPERED, DOUBLE ROW, STRAIGHT BORE, TWO SINGLE CONES WITH CONTACTING FRONT FACES SLOTTED AND CHAMFERED FOR LUBRICATION, ONE DOUBLE CUP WITH LUBRICATION HOLES AND GROVE (TYPE TNASW) (S/S BY A-A-59658)
• FF-B-187/11 – BEARING, ROLLER, TAPERED, DOUBLE ROW, STRAIGHT BORE, TWO SINGLE CONES, CONE BACK FACE RIB GROUND ON THE OUTER DIAMETER FOR SEALING PURPOSES, ONE DOUBLE CUP WITH LUBRICATION HOLES AND GROOVE (TYPE TNASWE) (S/S BY A-A-59659)
• FF-B-187/2 – BEARING, ROLLER, TAPERED, SINGLE ROW, NORMAL ANGLE, FLANGED CUP (TYPE TSF) (S/S BY A-A-59650)
• FF-B-187/3 – BEARING, ROLLER, TAPERED, SINGLE ROW, STEEP ANGLE (TYPE TSS) (S/S BY A-A-59651)
• FF-B-187/4 – BEARING, ROLLER, TAPERED, SINGLE ROW, STEEP ANGLE, FLANGED CUP (TYPE TSSF) (S/S BY A-A-59652)
• FF-B-187/5 – BEARING, ROLLER, TAPERED, DOUBLE ROW, ONE DOUBLE CONE, TWO SINGLE CUPS, (TYPES TDI AND TDIS) (S/S BY A-A-59653)
• FF-B-187/6 – BEARING, ROLLER, TAPERED, DOUBLE ROW, NORMAL ANGLE, TWO SINGLE CONES, ONE DOUBLE CUP, (TYPE TDO) (S/S BY A-A-59654)
• FF-B-187/7 – BEARING, ROLLER, TAPERED, DOUBLE ROW, STEEP ANGLE, TWO SINGLE CONES, ONE DOUBLE CUP (TYPE TDOS) (S/S BY A-A-59655)
• FF-B-187/8 – BEARING, ROLLER, TAPERED, DOUBLE ROW, NORMAL ANGLE, TWO SINGLE CONES, ONE DOUBLE CUP, NONADJUSTABLE (TYPE TNA) (S/S BY A-A-59656)
• FF-B-187/9 – BEARING, ROLLER, TAPERED, DOUBLE ROW, STEEP ANGLE, TWO SINGLE CONES, ONE DOUBLE CUP, NONADJUSTABLE (TYPE TNAS) (S/S BY A-A-59657)
• FF-B-195 – BEARING, SLEEVE, (BRONZE, PLAIN OR FLANGED) (NO S/S DOCUMENT)
• FF-B-2844 – BEARINGS, BALL, ANNULAR (GENERAL PURPOSE) (NO S/S DOCUMENT)
• FF-B-2844/1 – BEARING, BALL, ANNULAR: SINGLE ROW, RADIAL, NON-FILLING SLOT, MINIATURE SIZE, INSTRUMENT TYPE (CHROMIUM ALLOY STEEL) (S/S BY A-A-59643)
• FF-B-2844/2 – BEARING, BALL, ANNULAR: SINGLE ROW, RADIAL, NON-FILLING SLOT, EXTRA LIGHT SERIES (R - SERIES) (CHROMIUM ALLOY STEEL) (S/S BY A-A-59644)
• FF-B-2844/3 – BEARING, BALL, ANNULAR: SINGLE ROW, RADIAL, NON-FILLING SLOT, EXTRA LIGHT SERIES (R - SERIES) (LARGER THAN 0.7500 BORE) (CHROMIUM ALLOY STEEL) (S/S BY A-A-59645)
• FF-B-2844/4 – BEARING, BALL, ANNULAR: SINGLE ROW, RADIAL, NON-FILLING SLOT, MINIATURE SIZE, INSTRUMENT TYPE (CORROSION RESISTANT STEEL) (S/S BY A-A-59643)
• FF-B-2844/5 – BEARING, BALL, ANNULAR: SINGLE ROW, RADIAL, NON-FILLING SLOT, EXTRA LIGHT SERIES (R - SERIES) (0.7500 BORE AND UNDER) (CORROSION RESISTANT STEEL) (S/S BY A-A-59644)
• FF-B-2844/6 – BEARING, BALL, ANNULAR: SINGLE ROW, RADIAL, NON-FILLING SLOT, EXTRA LIGHT SERIES (XLS - SERIES) (CHROMIUM ALLOY STEEL) (S/S BY A-A-59646)
• FF-B-2844/7 – BEARING, BALL, ANNULAR: SINGLE ROW, RADIAL, NON-FILLING SLOT, LIGHT SERIES (LS - SERIES) (CHROMIUM ALLOY STEEL) (S/S BY A-A-59647)
• FF-B-2844/8 – BEARING, BALL, ANNULAR: SINGLE ROW, RADIAL, NON-FILLING SLOT, MEDIUM SERIES (MS - SERIES) (CHROMIUM ALLOY STEEL) (S/S BY A-A-59648)
• FF-B-561 – Bolts, (Screw), Lag (S/S by ASME-B18.2.1 and ASME-B18.18.1M)
• FF-B-571 – Bolts, Nuts, Studs, and Tap  Rivets (and Material for Same) (S/S by FF-B575, FF-B584, FF-N-836 and FF-S-1362)
• FF-B-575 – Bolt, Hexagon and Square
• FF-B-584 – Bolts, Square Neck and Tee Head (S/S by ASME-B18.5, ASME-B18.9, and ASME-B18.18.1M)
• FF-B-588 – Bolt, Toggle: and Expansion Sleeve, Screw (No S/S Document)
• FF-C-00440 – CLIP, PENCIL
• FF-C-00460 – CLOSER, DOOR
• FF-C-431 – Clip, Paper (Binder) (No S/S Document)
• FF-C-436 – CLIP, PAPER, WIRE (S/S BY A-A-2601)
• FF-C-450 – Clamps, Wire Rope
• FF-C-450/1 – Clamp, Wire Rope, Double-Grip, Steel, Double Saddled, Type II
• FF-C-77 – CASTERS, RIGID AND SWIVEL (INSTITUTIONAL DUTY) (S/S BY A-A-55617 AND A-A-55619)
• FF-C-82 – CASTER, SWIVEL CHAIR (S/S BY A-A-1011)
• FF-C-86 – Caster, Truck, Medium Duty (S/S by FF-C-88)
• FF-C-88 – Casters, Rigid and Swivel, Industrial Duty  (S/S by ASME-B56.11.1)
• FF-C-91 – CASTERS; WOOD-CHAIR (S/S BY FF-C-82)
• FF-D-396 – DISPENSERS, SOAP (S/S BY A-A-2703)
• FF-D-400 – DISPENSER, SOAP AND DISPENSER, SURGICAL DETERGENT
• FF-F-101 – FASTENER, PAPER, BRASS, PRONG TYPE (S/S BY A-A-247
• FF-F-111 – FASTENER, PAPER, METALLIC, COMPRESSOR TYPE (S/S BY A-A-407B
• FF-F-115 – FASTENER, PAPER, STEEL (FLAT AND ROUND HEAD) (NO S/S DOCUMENT)
• FF-F-118 – FASTENERS, PAPER, STEEL (FLAT AND ROUND HEAD)
• FF-F-133 – FASTENERS, WOOD JOINT, CORRUGATED (SAW EDGE) (NO S/S DOCUMENT)
• FFF-C-641 – Cream, Shaving and Soap, Shaving
• FFF-D-191 – Dentifrice
• FFF-F-486 – Floss, Dental (S/S by A-A-53652)
• FF-H-001687/(the base document for this interim revision is FF-H-1687A) – LOCKS, OFFICE MACHINE (S/S BY A-A-1013)
• FF-H-106 – Hardware, Builder's; Locks and Door Trim: General Specification for (See Notice 1 for Replacement Information)
• FF-H-106/1 – Hardware Builders, Locks and Door Trim, Cylinder Entrance Door Lock Type 122 and 1 (See Notice 1 for Replacement Information)
• FF-H-106/2 – Hardware, Builders, Locks and Door Trim, Cylinder Entrance Door Lock Type 123 and 123A (See Notice 1 for Replacement Information)
• FF-H-106/3 – Hardware, Builders, Locks and Door Trim, Letter Box Plates (See Notice 1 for Replacement Information)
• FF-H-111 – Hardware, Builders, Shelf and Miscellaneous (S/S by Various ANSI'S and CID'S)
• FF-H-116 – Hinges, Hardware, Builders  (S/S by Multiple ANSI's and CID's)
• FF-H-121 – Hardware, Builder's; Door Closers (S/S by A-A-1926)
• FF-H-136 – Hardware and Fittings for Lavatory-Partitions and Inclosures (Use FF-H-116)
• FF-H-1687/(an interim revision also exists for this document number as FF-H-001687 NOT 1) – Locks, Office Machine
• FF-H-1819 – HARDWARE, BUILDERS'; AUXILIARY LOCKS (S/S BY A-A-1932)
• FF-H-1820 – Hardware, Builders, Exit Devices (S/S by BHMA-A156.3)
• FF-H-571 – Holder and Cutter, Wrapping Paper (9 & Inch Diameter Rolls)
• FF-I-00535 – Incinerator, Stationary, Classified Waste (Security) (No S/S Document)
• FF-I-525 – INCINERATOR, PORTABLE, CLASSIFIED PAPER WASTE, SECURITY (NO S/S DOCUMENT)
• FF-L-2740 – Locks, Combination, Electromechanical
• FF-L-2890 – Lock Extensions (Pedestrian Door Lock Assembly Preassembled, Panic and Auxiliary Deadbolt)
• FF-L-2937 – Combination Lock, Mechanical
• FF-L-2938 – Locks, Combination, Electromechanical US Allies
• FF-L-486 – Lock, Cabinet
• FF-N-101 – NAILS, SPIKES, STAPLES, AND TACKS (S/S BY FF-N-103, FF-N-105, FF-S-611 AND FF-S-606)
• FF-N-103 – Nail (Small) and Tacks; Cut (S/S by FF-N-105 and FF-T-1813)
• FF-N-105 – Nails, Brads, Staples and Spikes: Wire, Cut and Wrought (No S/S Document)
• FF-N-180 – NEEDLES, EXCEPT SURGICAL, HAND (NO S/S DOCUMENT)
• FF-N-836 – Nut: Square, Hexagon, Cap, Slotted, Castle, Knurled, Welding and Single Ball Seat
• FF-N-845 – NUT, PLAIN, WING, INCH AND METRIC
• FF-O-601 – OPENERS, CAN, HAND AND MOUNTED (S/S BY A-A-52206)
• FF-O-605 – Opener, Can, Hand (Disposable, Combination Opener and Punch) (S/S by A-A-1080)
• FF-P-001480 – Padlock, Key Operated (Resistant to Opening by Force, Pick, and Bypass Techniques) (S/S by ASTM F-883)
• FF-P-00416/(the base document for this interim revision is FF-P-416E NOT 1) – PIN, SAFETY (S/S BY A-A-119)
• FF-P-00417/(the base document for this interim revision is FF-P-417) – PIN, SAFETY, CURVED, ORTHOPEDIC
• FF-P-00800 – PULPING MACHINE, PAPER, CLASSIFIED WASTE (SECURITY)
• FF-P-00810 – PULVERIZING MACHINE, PAPER, CLASSIFIED WASTE (SECURITY)
• FF-P-101 – Padlocks (S/S by A-A-1928, A-A-1930, A-A-1927, MIL-S-23769)
• FF-P-110 – Padlock, Changeable Combination (Resistant to Opening by Manipulation and Surreptitious Attack)
• FF-P-2827 – Padlock, Key Operated, General Field Service
• FF-P-2828 – Padlock, Key Operated, Tamper Indicative