Federal Specification

Documents

• GGG-S-278 – SHEARS AND SCISSORS (NO S/S DOCUMENT)
• GGG-S-280 – SHEARS, GRASS CUTTING AND SHEARS, HEDGE TRIMMING (S/S BY A-A-2845)
• GGG-S-281 – SHEARS, METAL CUTTING, ELECTRIC (PORTABLE)
• GGG-S-282 – SHEARS, METAL CUTTING, ELECTRIC (PORTABLE) (S/S BY A-A-50459)
• GGG-S-283 – SHEARS, METAL CUTTING, PNEUMATIC (NO S/S DOCUMENT)
• GGG-S-284 – SHEARS; PRUNING, HAND, (ONE-HAND OPERATED) (S/S BY A-A-962)
• GGG-S-285 – SHEARS, PRUNING, HAND, (TWO-HAND OPERATED, LOPPING) (S/S BY A-A-243)
• GGG-S-286 – SHEARS, ROACHING
• GGG-S-291 – SHEARS, METAL CUTTING; BENCH AND HAND (NO S/S DOCUMENT)
• GGG-S-326 – SHOVELS, SCOOPS, SPADES, SNOW PUSHERS, AND TELEGRAPH SPOONS (NO S/S DOCUMENT)
• GGG-S-51 – Saw, Circular, Portable, Electric
• GGG-S-58 – Saw, Radial Overarm, Woodworking (No S/S Document)
• GGG-S-595 – Soldering Irons, Nonelectric, (Coppers) (S/S by A-A-50971)
• GGG-S-60 – Saws, Butcher's; and Blades, Butcher's Handsaw  (S/S byA-A-2574)
• GGG-S-600 – Soldering Iron, Self Heating (without Electric or External Heat) (S/S by A-A-50963)
• GGG-S-61 – Saws
• GGG-S-62 – SAW, CHAIN, PORTABLE, POWER (S/S BY A-A-59662 AND A-A-59663)
• GGG-S-620 – Spectacles, Industrial; and Lenses (Ophthatmic, Plano and Prescription, Glare and Impact Resistant) (S/S by A-A-1995 and A-A-1996)
• GGG-S-63 – SAW, CIRCULAR, PORTABLE, PNEUMATIC (NO S/S DOCUMENT)
• GGG-S-630 – SPREADER, TIRE, (PNEUMATICALLY OPERATED) (NO S/S DOCUMENT)
• GGG-S-64 – SAWS, CROSSCUT, HAND, ONE-MAN AND TWO-MAN
• GGG-S-65 – SAWS, HAND (NO S/S DOCUMENT)
• GGG-S-656 – SQUARES, CARPENTERS', DIEMAKERS', AND MACHINISTS' (NO S/S DOCUMENT)
• GGG-S-66 – Saws, Hole: Blades, Arbors and Integral Units (S/S by A-A-51135)
• GGG-S-665 – STRIPPER, CABLE, HAND, AND STRIPPER, WIRE, HAND (NO S/S DOCUMENT)
• GGG-S-69 – SAW, POWER HACK, DRY CUT, PORTABLE (3-INCH CAPACITY) (NO S/S DOCUMENT)
• GGG-S-72 – SAW ATTACHMENT, RECIPROCATING, PORTABLE POWER TOOL
• GGG-S-731 – Stakes, Sheet Metalworking; and Plate, Bench Stakeholder (No S/S Document)
• GGG-S-735 – STAMPING AND MARKING EQUIPMENT; GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
• GGG-S-735/1 – STAMPING AND MARKING EQUIPMENT, STENCILS (N0 S/S DOCUMENT)
• GGG-S-735/2 – STAMPING AND MARKING EQUIPMENT, RUBBER STAMP, HAND, FIXED TYPE (NO S/S DOCUMENT)
• GGG-S-735/3 – STAMPING AND MARKING EQUIPMENT, RUBBER STAMP, HAND, FIXED AND REMOVEABLE TYPE, FOOD INSPECTION, VETERINARY (NO S/S DOCUMENT)
• GGG-S-735/4 – STAMPING AND MARKING EQUIPMENT; RUBBER STAMP, POCKET (NO S/S DOCUMENT)
• GGG-S-735/5 – STAMPING AND MARKING EQUIPMENT; DIES METAL STAMPING, HAND TYPE (NO S/S DOCUMENT)
• GGG-S-735/6 – STAMPING AND MARKING EQUIPMENT; DIES, LUMBER STAMPING, HAMMER TYPE (NO S/S DOCUMENT)
• GGG-S-735/7 – STAMPING AND MARKING EQUIPMENT; PRESS, LEAD SEAL, HAND, REVERSIBLE TYPE (NO S/S DOCUMENT)
• GGG-S-735/8 – STAMPING AND MARKING EQUIPMENT; PRESS, LEAD SEAL, HAND, NONREVERSIBLE TYPE (NO S/S DOCUMENT)
• GGG-S-740 – STAND, PIPE VISE, AND VISES AND STANDS, PIPE (NO S/S DOCUMENT)
• GGG-S-75/(an interim revision also exists for this document number as GGG-S-0075A(1) NOT 1) – Saw Set, Hand (S/S by A-A-2968)
• GGG-S-751 – STICK, PACKING
• GGG-S-775 – STUD REMOVER AND SETTER (NO S/S DOCUMENT)
• GGG-S-793 – STRIPPER, WIRE, BENCH (NO S/S DOCUMENT)
• GGG-T-001310 – TAPE, FISH, STEEL (NO S/S DOCUMENT)
• GGG-T-0030 – TACKER, STAPLE (COMPRESSION TYPE, MANUALLY OPERATED FOR ROUND CROWNED STAPLES) AND STAPLE, TACKER (ROUND CROWNED) (NO S/S DOCUMENT)
• GGG-T-0040 – TAMPERS, HAND (NO S/S DOCUMENT)
• GGG-T-00549 – TONGS, LABORATORY (S/S BY NNN-T-580)
• GGG-T-00558/8 – TOOL BOX, PORTABLE (MACHINIST S, CLOSED TOP)
• GGG-T-00559 – Tool Kit, Leathercraft (No S/S Document)
• GGG-T-00560 – Tool Box, Portable (Mechanic's Chest) (S/S by GGG-T-558)
• GGG-T-00563/(the base document for this interim revision is GGG-T-563A(4) NOT 1) – Tools, Blacksmiths' (Chisels, Flatters, Fullers, Hardies, Bolt Heading Tools, Punches, and Swages)
• GGG-T-00570 – Torch Kit, Soldering (Propane Gas) (S/S by A-A-51128 )
• GGG-T-00870 – TWEEZERS, CRAFTSMAN'S (NO S/S DOCUMENT)
• GGG-T-106 – TAPE, MEASURING, (GENERAL USE) (NO S/S DOCUMENT)
• GGG-T-190 – Tester, Material Hardness (Use MIL-T-45186)
• GGG-T-20 – TACKER, STAPLE (COMPRESSION TYPE, MANUALLY OPERATED) AND STAPLE, TACKER (NO S/S DOCUMENT)
• GGG-T-2761 – TONGS, MATERIAL LIFTING, PIPE (S/S BY A-A-59228)
• GGG-T-330 – THREADING SET, SCREW (NO S/S DOCUMENT)
• GGG-T-350 – TIRE LOCK RING TOOL, TIRE REMOVING TOOL, AND TIRE IRON (NO S/S DOCUMENT)
• GGG-T-546 – TONGS, BLACKSMITHS (NO S/S DOCUMENT)
• GGG-T-551 – TOOL KIT, CROSSCUT SAW REFITTING
• GGG-T-555 – TOOL BOX, PORTABLE, (MACHINISTS
• GGG-T-558 – TOOL BOX, PORTABLE; GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
• GGG-T-558/1 – TOOL BOX PORTABLE (UNIVERSAL TYPE) (NO S/S DOCUMENT)
• GGG-T-558/2 – TOOL BOX, PORTABLE (GENERAL TYPE) (NO S/S DOCUMENT)
• GGG-T-558/3 – TOOL BOX, PORTABLE (SHIPFITTER'S TYPE) (NO S/S DOCUMENT)
• GGG-T-558/4 – TOOL BOX, PORTABLE (CARPENTER'S TYPE) (NO S/S DOCUMENT)
• GGG-T-558/5 – TOOL BOX, PORTABLE (MECHANICS CHEST TYPE) (NO S/S DOCUMENT)
• GGG-T-558/6 – TOOL BOX, PORTABLE (GENERAL, TWO-HANDLE TYPE) (NO S/S DOCUMENT)
• GGG-T-558/7 – TOOL BOX, PORTABLE (MACHINISTS', TILL-IN-TOP) (NO S/S DOCUMENT)
• GGG-T-558/9 – TOOL BOX, PORTABLE (HELICAL THREAD REPAIR) (NO S/S DOCUMENT)
• GGG-T-561 – TOOLS, BLACKSMITHS AND HORSESHOERS (S/S BY GGG-T-563)
• GGG-T-563/(an interim revision also exists for this document number as GGG-T-00563B(1) NOT 1) – Tools Blacksmith's (Chisels, Flatters, Fullers, Hardies, Bolt Heading Tools, Punches and Swages)
• GGG-T-581 – TAPS, DIES, DIESTOCKS, AND THREADING SET-PIPE THREADING, HAND (S/S BY A-A-305, A-A-306, A-A-311, A-A-345, A-A-363, A-A-364, A-A-367, OR A-A-368)
• GGG-T-591 – TOOLS, PNEUMATIC, PORTABLE (HAMMERS, RIVETERS, DRILLS, AND GRINDERS) (S/S BY OO-H-116, OO-R-421, OO-D-691, OO-G-669, OO-W-891)
• GGG-T-60 – TAPS, THREAD CUTTING, CARBON STEEL, HAND CUT THREAD, AMERICAN NATIONAL AND METRIC THREAD FORM, SCREW AND BOLT (S/S BY ANSI-B94.4)
• GGG-T-661/(an interim amendment also exists for this document number as GGG-T-661B(I1) NOT 1) – Trammels and Trammel Points (S/S by A-A-2537)
• GGG-T-661/(the base document for this interim amendment is GGG-T-661B NOT 1) – Trammels, and Trammel Points (S/S by A-A-2537)
• GGG-T-669 – Trimmer, Tree, Pole-Mounted (No S/S Document)
• GGG-T-671 – TROWELS (NO S/S DOCUMENT)
• GGG-T-70 – Tap, Thread Cutting, (Standard, American National Form and Metric Spark Plug Thread, High-Speed Steel, Ground Thread, Hand) (S/S BY ANSI-B94.9)
• GGG-T-71 – Taps, Threading, Hand, Commercial and Precision Ground, Tap Wrenches and Standard Threading Sets (No S/S Document)
• GGG-T-80 – TAP, THREAD CUTTING, CARBON STEEL HAND, CUT THREAD, AMERICAN STANDARD TAPER PIPE THREADS (NO S/S DOCUMENT)
• GGG-T-870/(an interim revision also exists for this document number as GGG-T-00870B(1) NOT 1) – TWEEZERS, CRAFTSMAN'S (NO S/S DOCUMENT)
• GGG-V-191 – "V" BLOCKS AND CLAMPS (S/S BY A-A-51150)
• GGG-V-410 – VISE, BENCH, CLAMP BASE; SHEET METAL-WORKER'S; BENCH AND PIPE; JEWELER'S; MACHINIST'S; AND MULTIPOSITION (NO S/S DOCUMENT)
• GGG-V-412 – VISE: HAND; PIN; WIRE ROPE SPLICING; AND SQUARE END SAWING, TUBE (NO S/S DOCUMENT)
• GGG-V-415 – VISE, PIPE (S/S BY A-A-2980 AND A-A-3050)
• GGG-V-436 – VISE (S/S BY GGG-V-410, 412, 415, 440, 443, AND 445)
• GGG-V-440 – VISE, HANDSAW, FILING, BAND SAW FILING, AND CIRCULAR SAW FILING (NO S/S DOCUMENT)
• GGG-V-443 – VISES, MACHINE TABLE: BENCH AND MACHINE TABLE: CONTOUR GRIPPING (S/S BY A-A-51123)
• GGG-V-445 – Vise, Woodworker's and Patternmaker's (S/S by A-A-3036)
• GGG-V-790 – VULCANIZERS, HOT PATCH AND PLATE, INNER TUBE (NO S/S DOCUMENT)
• GGG-W-001405 – Wrench, Box (Ratcheting) (No S/S Document)
• GGG-W-00645 – WRENCH, OPEN END BOX (AND BOX COMBINATION, CROWFOOT, RATCHET, AND RATCHET CROWFOOT) (NO S/S DOCUMENT)
• GGG-W-00647 – Wrench, Bung, and Wrench, Drain Plug (S/S by A-A-3086)
• GGG-W-00649 – Wrench, Plier; Clamp, Plier; and Plier, Tubing Pinch (No S/S Document)
• GGG-W-00652/(the base document for this interim revision is GGG-W-652(1)) – Wrench, (Key), Socket Head Screw (S/S by GGG-K-275)
• GGG-W-00656 – WRENCH, SOCKET (SET, SPARK PLUG, HAND, INCLUDING HANDLES AND ATTACHMENTS)
• GGG-W-00675 – WRENCH, SOCKET (SPIN TYPE, SCREWDRIVER GRIP) (NO S/S DOCUMENT)
• GGG-W-1437 – WRENCH, SOCKET AND BOX END (NO S/S DOCUMENT)