American Society for Testing and Materials (ASTM)

Documents

• ASTM-D3368 – Sheet and Film, FEP-Fluorocarbon
• ASTM-D3369 – Film, Resin Cast, Polytetrafluoroethylene (PTFE) (No S/S Document)
• ASTM-D3370 – Standard Practices for Sampling Water from Flowing Process Streams
• ASTM-D3372 – Molybdenum in Water
• ASTM-D3373 – Vanadium in Water
• ASTM-D3374 – Yarns, Glass, Vinyl-Coated
• ASTM-D3378 – ROOFING, ASPHALT SATURATED & COATED ASBESTOS FELT BASE SHEET USED IN - 25 JUN 82
• ASTM-D3379 – Material, High Modulus Single Filament, Tensile Strength & Young S Modulus for (No S/S Document)
• ASTM-D3381 – Viscosity-Graded Asphalt Cement for use in Pavement Construction
• ASTM-D3385 – Soils, Infiltration Rate of, in Field Using Double-Ring Infiltrometers, Stand Test Methods for
• ASTM-D3386 – Coefficient of Linear Thermal Expansion of Electrical Insulating Materials, Standard Test Method for (No S/S Document)
• ASTM-D3388 – COATED FABRIC - STIFFENING AT LOW TEMPERATURES (TORSIONAL WIRE APPARATUS) - 27 NOV 81
• ASTM-D3389 – Fabrics, Coated, Abrasion Resistance (Rotary Platform Abrader)
• ASTM-D3391 – TAPE, RUBBER INSULATING, FOR HIGH VOLTAGE APPLICATIONS (NO S/S DOCUMENT)
• ASTM-D34 – PIGMENTS, WHITE, CHEMICAL ANALYSIS OF
• ASTM-D3400 – Liquid Sodium Silicates (No S/S Document)
• ASTM-D3401 – Water in Halogenated Organic Solvents and Their Admixtures
• ASTM-D341 – Liquid Petroleum or Hydrocarbon Products, Viscosity-Temperature Equations and Charts for
• ASTM-D3410 – Resin Composites, Unidirectional or Crossply Fiber, Compressive Properties of
• ASTM-D3410-D3410M – POLYMER MATRIX COMPOSITE MATERIALS WITH UNSUPPORTED GAGE SECTION BY SHEAR LOADING, COMPRESSIVE PROPERTIES OF
• ASTM-D3413 – LEAD (INORGANIC) IN WORKPLACE ATMOSPHERES BY ATOMIC ABSORPTION SPECTROMETRY, STANDARD TEST METHOD FOR (NO S/S DOCUMENT)
• ASTM-D3416 – TOTAL HYDROCARBONS, METHANE, AND CARBON MONOXIDE IN THE ATMOSPHERE (GAS CHROMATOGRAPHIC METHOD) (NO S/S DOCUMENT)
• ASTM-D3417 – Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) (No S/S Document)
• ASTM-D3418 – Polymers by Differential Scanning Calorimetry, Transition Temperatures and Enthalpies of Fusion and Crystallization of
• ASTM-D3422 – TOLUENE DIISOCYANATE CONCENTRATIONS, TENTATIVE METHOD OF TEST FOR, IN WORKPLACE ATMOSPHERES (NO S/S DOCUMENT)
• ASTM-D3432 – Solutions By Gas Chromatography, Unreacted Toluene Diisocyantes in Urethane Prepolymers and Coating
• ASTM-D3441 – Soil, Mechanical Cone Penetration Tests of (No S/S Document)
• ASTM-D3443 – Trichlorotrifluoroethane, Chloride in
• ASTM-D3446 – TRICHLOROTRIFLUOROETHANE, WATER CONTENT OF, WITH KARL FISCHER REAGENT, TENTATIVE METHOD OF TEST FOR (REPLACED BY ASTM-D3401)
• ASTM-D3447 – Solvents, Purity of Halogenated Organic (No S/S Document)
• ASTM-D3449 – Sulfur Dioxide in Workplace Atmospheres (Barium Perchlorate Method) (No S/S Document)
• ASTM-D345 – Calcium Chloride for Roads and Structural Applications, Sampling and Testing
• ASTM-D3450 – Coatings, Interior Architectural, Washability Properties of
• ASTM-D3452 – Rubber-Identification by Pyrolysis-Gas Chromatography
• ASTM-D3453 – Materials, Flexible Cellular-Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications
• ASTM-D3462 – Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules (See Withdrawal Notice for Replacement Information)
• ASTM-D3464 – Duct, in a Average Velocity Using a Thermal Anemometer
• ASTM-D3476 – BIS (CHLOROMETHYL) ETHER (BIS CME) IN WORKPLACE ATMOSPHERE (GAS CHROMOTOGRAPHY - MASS SPECTROMETRY, STANDARD TEST METHOD FOR (NO S/S DOCUMENT)
• ASTM-D3479 – Composites, Resin Matrix, Tension-Tension Fatigue of Oriented Fiber
• ASTM-D3479-D3479M – Materials, Tension-Tension Fatigue of Polymer Matrix Composite
• ASTM-D348 – Tubes, Rigid Used for Electrical Insulation
• ASTM-D3482 – Adhesives, Determining Electrolytic Corrosion of Copper by
• ASTM-D3487 – Mineral Insulating Oil Used in Electrical Apparatus
• ASTM-D3492 – Contraceptives, Rubber (Male Condoms)
• ASTM-D3495 – Hexane Extraction of Leather
• ASTM-D3499 – Panels, Wood-Based Structural, Toughness of
• ASTM-D350 – Sleeving used for Electrical Insulation, Flexible Treated
• ASTM-D3500 – Panels, Structural, In Tension
• ASTM-D3501 – Wood-Based Structural Panels in Compression
• ASTM-D3502 – WOOD PRODUCTS, MOISTURE ABSORPTION OF COMPRESSED (NO S/S DOCUMENT)
• ASTM-D3503 – WOOD PRODUCTS, COMPRESSED, SWELLING AND RECOVERY OF, DUE TO MOISTURE ABSORPTION (NO S/S DOCUMENT)
• ASTM-D3505 – Density or Relative Density of Pure Liquid Chemicals, Standard Test Method for
• ASTM-D351 – Muscovite Block, Natural Mica and Thins Based on Visual Quality
• ASTM-D3511 – Pilling Resistance and Other Related Surface Changes of Textile Fabrics Brush Pilling Tester Method
• ASTM-D3511-D3511M – Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
• ASTM-D3517 – Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
• ASTM-D3518-D3518M – MATERIALS BY TENSILE TEST OF A PLUS-MINUS 45 DEG. LAMINATE, POLYMER MATRIX COMPOSITE, IN-PLANE SHEAR RESPONSE OF
• ASTM-D3529-D3529M – Matrix Solids Content and Matrix Content of Composite Prepreg
• ASTM-D3530-D3530M – Standard Test Method for Volatiles Content of Composite Material Prepreg
• ASTM-D3531 – Prepreg, Carbon Fiber Epoxy, Resin Flow of
• ASTM-D3532 – Gel Time of Carbon Fiber-Epoxy Prepreg
• ASTM-D3539 – Liquids, Rates of Volatile Evaporation by Shell, Thin-Film Evaporometer (No S/S Document)
• ASTM-D3544 – Fiber, High Modulus, Reporting Test Methods & Results on (No S/S Document)
• ASTM-D3545 – Alcohol Content and Purity of Acetate Esters by Gas Chromatography
• ASTM-D3550 – Wall, Thick Ring-Lined, Split Barrel, Drive Sampling of Soils (No S/S Document)
• ASTM-D3551 – Laboratory Preparation of Soil-Lime Mixtures Using a Mechanical Mixer Emulsified
• ASTM-D3552-D3552M – Metal Matrix Composites, Tensile Properties of Fiber Reinforced
• ASTM-D3553 – Composite, Reinforced Metal Matrix, Fiber Coutent by Digestion of (No S/S Document)
• ASTM-D3556 – Deposition on Glassware During Mechanical Dishwashing
• ASTM-D3557 – Water, Cadmium in (No S/S Document)
• ASTM-D3558 – Water, Cobalt in 18 FEB 77
• ASTM-D3559 – Lead in Water
• ASTM-D3567 – Pipe and Fittings, "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin), Determining Dimensions of
• ASTM-D357 – FUELS, MOTOR, KNOCK CHARACTERISTICS OF, OF 100 OCTANE NUMBER & BELOW BY THE MOTOR METHOD
• ASTM-D3574 – Materials, Flexible Cellular-Slab, Bonded and Molded Urethane Foams
• ASTM-D3575 – Materials, Flexible Cellular, Made From Olefin Polymers
• ASTM-D3577 – Gloves, Surgical, Rubber
• ASTM-D3578 – Gloves, Rubber Examination
• ASTM-D3579 – Tubes, Drainage, Rubber Surgical, Penrose-Type
• ASTM-D358 – Wood to Be Used as Panels in Weathering Tests of Coatings (S/S by ASTM-D7787)
• ASTM-D3586 – CHROMIUM IN WORKPLACE ATMOSPHERES (COLORIMETRIC METHOD) STANDARD TEST METHOD FOR (NO S/S DOCUMENT)
• ASTM-D3595 – Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
• ASTM-D36 – Bitumen, (Ring-and-Ball Apparatus), Softening Point of (S/S by ASTM-D36/D36M)
• ASTM-D3611 – Tapes, Pressure Sensitive, Accelerated Aging of
• ASTM-D3617 – Roof Membranes, New Built-Up, Sampling and Analysis of
• ASTM-D362 – TOLUENE, INDUSTRIAL GRADE (NO S/S DOCUMENT)
• ASTM-D3621 – ACETATE ESTERS, DETERMINATION OF WATER IN, STANDARD PRACTICE FOR (NO S/S DOCUMENT)
• ASTM-D3623 – Panels, Antifouling, in Shallow Submergence
• ASTM-D3624 – Mercury in Paint by Atomic Absorption Spectroscopy, Low Concentrations of
• ASTM-D3634 – Engine Coolants, Trace Chloride ION in
• ASTM-D364 – XYLENE, INDUSTRIAL GRADE - 30 SEP 77
• ASTM-D3652-D3652M – Tapes, Pressure-Sensitive, Thickness of
• ASTM-D3653 – TAPE, PRESSURE SENSITIVE, HOLDING POWER OF LINEAL AND MULTIDIRECTIONAL FILAMENT REINFORCED (NO S/S DOCUMENT)
• ASTM-D3654-D3654M – Tapes, Pressure-Sensitive, Shear Adhesion of
• ASTM-D3656 – INSECT SCREENING AND LOUVER CLOTH WOVEN FROM VINYL-COATED GLASS YARNS
• ASTM-D3662 – Tapes, Pressure-Sensitive, Bursting Strength of (No S/S Document)
• ASTM-D3662M – Tapes, Pressure-Sensitive, Bursting Strength of (Metric) (No S/S Document)
• ASTM-D3666 – Materials, Paving, Agencies Testing and Inspecting Road, Minimum Requirements for
• ASTM-D3667 – Rubber Seals Used in Flat-Plate Solar Collectors
• ASTM-D3668 – SOIL-LIME MIXTURES, LABORATORY COMPACTED, BEARING RATIO OF (NO S/S DOCUMENT)