American Society for Testing and Materials (ASTM)

Documents

• ASTM-D2417 – PIPE, PERFORATED, LAMINATED-WALL BITUMINIZED FIBER, FOR GENERAL DRAINAGE, STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)
• ASTM-D2419 – Sand Equivalent Value of Soils and Fine Aggregate
• ASTM-D242 – Paving, Bituminous Mixtures, Mineral Filler for (See Notice of Withdrawal for Superseding Information)
• ASTM-D2434 – Soils, (Constant Head), Granular, Permeability of (No S/S Document)
• ASTM-D2436 – Laboratory Ovens for Electrical Insulation, Forced-Convection (No S/S Document)
• ASTM-D244 – Asphalts, Emulsified
• ASTM-D2440 – Oil, Mineral Insulating, Oxidation Stability Of
• ASTM-D2444 – Pipe and Fittings, Thermoplastic, by Means of a Tup (Falling Weight), Determination of the Impact Resistance of
• ASTM-D2447 – Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (No S/S Document)
• ASTM-D245 – Lumber, Visually Graded, Establishing Structural Grades and Related Allowable Properties for
• ASTM-D2455 – Acids, Carboxylic, in Alkyd Resins, Identification of (No S/S Document)
• ASTM-D2457 – Films, Plastic, and Solid Plastics, Specular Gloss of
• ASTM-D2464 – Pipe Fittings, Plastic, Schedule 80, Threaded Poly (Vinyl Chloride) (PVC)
• ASTM-D2466 – Pipe Fittings, Plastic, Schedule 40, Poly (Vinyl Chloride) (PVC)
• ASTM-D2467 – Plastic Pipe Fittings, Schedule 80, Poly (Vinyl Chloride) (PVC)
• ASTM-D2468 – ACRYLONITRILE-BUTADIENE-STYRENE (ABS) PLASTIC PIPE FITTINGS, SCHEDULE 40 (NO S/S DOCUMENT)
• ASTM-D2469 – PIPE, FITTINGS, ACRYLONITRILE-BUTADIENE-STYRENE (ABS), SCHEDULE 80 (NO S/S DOCUMENT)
• ASTM-D2471 – Resins, Reacting Thermosetting, Gel Time and Peak Exothermic Temperature of (No S/S Document)
• ASTM-D2472 – Sulfur Hexafluoride
• ASTM-D2475 – Felt, Standard Specification for
• ASTM-D2481 – Wood Preservatives for Marine Services by Means of Small-Size Specimens, Accelerated Evaluation of, Standard Test Method of (No S/S Document)
• ASTM-D2486 – Scrub Resistance of Wall Paints
• ASTM-D2487 – Soils for Engineering Purposes, Classification of (Unified Soil Classification System)
• ASTM-D2488 – Soils (Visual-Manual Procedure), Description and Identification of
• ASTM-D249 – ASPHALT ROLL ROOFING (ORGANIC FELT) SURFACED WITH MINERAL GRANULES (NO S/S DOCUMENT)
• ASTM-D2492 – Coal, Forms of Sulfur in
• ASTM-D25 – Piles, Round Timber
• ASTM-D250 – ASPHALT-SATURATED ASBESTOS FELT, USED IN ROOFING AND WATERPROOFING, STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)
• ASTM-D2500 – Petroleum Products, Cloud Point of
• ASTM-D2503 – Hydrocarbons by Thermoelectric Measurement of Vapor Pressure, Relative Molecular Mass (Molecular Weight) of
• ASTM-D2510 – Lubricants, Solid Film, Adhesion of
• ASTM-D2511 – Lubricants, Solid Film, Thermal Shock Sensitivity of
• ASTM-D2512 – Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques), Compatibility of
• ASTM-D2513 – Gas, Thermoplastic, Pressure Pipe, Tubing, and Fittings (No S/S Document)
• ASTM-D2517 – Epoxy Resin, Reinforced Gas Pressure Pipe and Fittings
• ASTM-D2519 – Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
• ASTM-D2520 – Materials at Microwave Frequencies and Temperatures to 1650 Degrees C, Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating (No S/S Document)
• ASTM-D2532 – Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
• ASTM-D2533 – Vapor-Liquid Ratio of Spark-Ignition Engine Fuels (No S/S Document)
• ASTM-D2547 – LEAD IN GASOLINE, VOLUMETRIC CHROMATE METHOD, TEST METHOD FOR (NO S/S DOCUMENT)
• ASTM-D2550 – WATER SEPARATION CHARACTERISTICS OF AVIATION TURBINE FUELS, STANDARD TEST METHOD FOR (NO S/S DOCUMENT)
• ASTM-D2553 – DETERGENT, DRYCLEANING, ON A DRYCLEANED GARMENT, DETECTING ODOR OF (NO S/S DOCUMENT)
• ASTM-D2556 – Properties, Adhesives Having Shear-Rate-Dependent Flow, Apparent Viscosity of
• ASTM-D2559 – Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
• ASTM-D256 – Plastics, Determining the IZOD Pendulum Impact Resistance of
• ASTM-D2563 – Parts, Glass-Reinforced Plastic Laminate, Classifying Visual Defects in
• ASTM-D2564 – Cements, Solvent, for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems
• ASTM-D2565 – Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
• ASTM-D257 – Resistance DC or Conductance of Insulating Materials
• ASTM-D2572 – Isocyanate Groups in Urethane Materials or Prepolymers
• ASTM-D2573-D2573M – Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils
• ASTM-D2579 – Carbon in Water, Total Organic, Standard Test Method for (No S/S Document)
• ASTM-D2580 – Phenols in Water by Gas-Liquid Chromatography (No S/S Document)
• ASTM-D2582 – Film, Plastic, and Thin Sheeting, Puncture-Propagation Tear Resistance of
• ASTM-D2583 – PLASTICS, RIGID, BY MEANS OF A BARCOL IMPRESSOR, INDENTATION HARDNESS OF
• ASTM-D2584 – Resins, Cured Reinforced, Ignition Loss of
• ASTM-D2586 – Cylinders, Glass-Reinforced Plastic, Hydrostatic Compressive Strength of (No S/S Document)
• ASTM-D2594-D2594 – Stretch Properties of Knitted Fabrics having Low Power
• ASTM-D2595 – Greases, Lubricating, Over Wide-Temperature Range, Evaporation Loss of
• ASTM-D2596 – Grease, Lubricating, Measurement of Extreme-Pressure Properties of, (Four-Ball Method)
• ASTM-D2599 – GASOLINE BY X-RAY SPECTROMETRY, LEAD IN (NO S/S DOCUMENT)
• ASTM-D260 – Oil, Linseed, Boiled (No S/S Document)
• ASTM-D2603 – Oils, Polymer-Containing, Sonic Shear Stability of
• ASTM-D2607 – PEATS, MOSSES, HUMUS, AND RELATED PRODUCTS, STANDARD CLASSIFICATION OF (NO S/S DOCUMENT)
• ASTM-D2609 – Pipe, Plastic, Plastic Fittings for Polyethylene (PE)
• ASTM-D261 – Pigment, Blue, Iron (No S/S Document)
• ASTM-D2615 – POLYMER, URETHANE, FREE TOLUENEL DIISOCYANATE IN - 24 DEC 70 (S/S BY ASTM D3432)
• ASTM-D2617 – Leather, Total Ash in
• ASTM-D2622 – Sulfer in Petroleum Products by Wavelength Dispersive X-Ray Fluorscence Spectrometry
• ASTM-D2624 – Fuels, Aviation and Distillate, ELectrical Conductivity of
• ASTM-D2625 – Film Lubricants, Solid, (Falex Pin and Vee Method), Endurance (Wear) Life and Load-Carrying Capacity of
• ASTM-D2626-D2626M – Standard Practice for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
• ASTM-D2628 – Seals for Concrete Pavements, Preformed Polychloroprene Elastomeric Joint, Standard Specification for
• ASTM-D263 – Pigment, Green, Oxide, Chrome
• ASTM-D2632 – Rubber Property-Resilience by Vertical Rebound
• ASTM-D2649 – Lubricants, Solid Film, Corrosion Characteristics of
• ASTM-D2651 – Metal Surfaces for Adhesive Bonding, Preparation of
• ASTM-D2654 – Textiles, Moisture in (No S/S Document)
• ASTM-D2657 – Pipe and Fittings, Heat Fusion Joining of Polyolefin
• ASTM-D2661 – Plastic Drain, Waste, and Vent Pipe and Fittings, Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic
• ASTM-D2662 – PIPE, POLYBUTYLENE (PB) PLASTIC, (SIDR-PR) BASED ON CONTROLLED INSIDE DIAMETER (NO S/S DOCUMENT)
• ASTM-D2665 – Plastic Drain, Waste, and Vent Pipe and Fittings, Poly (Vinyl Chloride) (PVC)
• ASTM-D2666 – TUBING, POLYBUTYLENE (PB) PLASTIC (NO S/S DOCUMENT)
• ASTM-D2667 – Sulfonates, Alkylbenzene, Biodegradability of (No S/S Document)
• ASTM-D2670 – Lubricants, Fluid, (Falex Pin and Vee Block Method), Measuring Wear Properties of
• ASTM-D2671 – Tubing, Heat-Shrinkable, for Electrical Use
• ASTM-D2672 – Joints for IPS PVC Pipes Using Solvent Cement
• ASTM-D268 – Volatile Solvents and Chemical Intermediates for use in Paint and Related Coatings and Material, Sampling and Testing
• ASTM-D2680 – SEWER PIPING, COMPOSITE, ACRYLONITRILE-BUTADIENE-STYRENE (ABS) AND POLY(VINYL CHLORIDE) (PVC) (NO S/S DOCUMENT)
• ASTM-D2683 – Pipe and Tubing, Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene (No S/S Document)
• ASTM-D2686 – Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape (Future Acquisition should refer to A-A-59474)
• ASTM-D2697 – Volume Nonvolatile Matter in Clear or Pigmented Coatings
• ASTM-D2698 – Paints by High-Speed Centrifuging, Determination of the Pigment Content of Solvent-Reducible
• ASTM-D2699 – Engine Fuel, Research Octane Number of Spark-Ignition
• ASTM-D270 – PETROLEUM & PETROLEUM PRODUCTS, SAMPLING (S/S BY ASTM D 4057 OR ASTM D 4177)
• ASTM-D2700 – Engine Fuel, Motor Octane Number of Spark-Ignition
• ASTM-D2702 – Rubber Chemicals-Determination of Infrared Absorption Characteristics
• ASTM-D2707 – TESTING HARD RUBBER IN TENSION (S/S BY FED-STD-601)
• ASTM-D2709 – Water and Sediment in Middle Distillate Fuels by Centrifuge
• ASTM-D2714 – Machine, the Falex Block-on-Ring Friction and Wear Testing, Calibration and Operation of