FSC-9330: Plastics Fabricated Materials

Documents

• ASTM-D955 – MOLD DIMENSIONS OF MOLDED PLASTICS, MEASURING SHRINKAGE FROM
• ASTM-E162 – Surface Flammability of Material Using a Radiant Heat Energy Source
• ASTM-E166 – GONIOPHOTOMETRY OF TRANSMITTINGS & MATERIALS (USE ASTM E167)
• ASTM-E167 – GONIOPHOTOMETRY OF OBJECTS AND MATERIALS (NO S/S DOCUMENT)
• ASTM-E595 – Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
• ASTM-F320 – Enclosures, Aerospace Transparent, Hail Impact Resistance of
• ASTM-F330 – Enclosures, Aerospace Transparent, Bird Impact Testing of
• ASTM-F484 – Plastics, Acrylic, in Contact with Liquid or Semi Liquid Compounds, Stress Crazing of, Standard Test Method for
• ASTM-F726 – Sorbent Performance of Adsorbents for use on Crude Oil and Related Spills
• ASTM-F754 – IMPLANTABLE POLYTETRAFLUOROETHYLENE (PTFE) POLYMER FABRICATED IN SHEET, TUBE, AND ROD SHAPES (NO S/S DOCUMENT)
• ASTM-F791 – Plastics Transparent, Standard Test Method for Stress Crazing of
• ASTM-F801 – Optical Angular Deviation of Transparent Parts, Measuring
• ASTM-F814 – SMOKE, SPECIFIC OPTICAL DENSITY OF, GENERATED BY SOLID MATERIALS FOR AEROSPACE APPLICATIONS (NO S/S DOCUMENT)
• ASTM-G155 – Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
• ASTM-G21 – Materials to Fungi, Synthetic Polymeric, Determining Resistance of
• ASTM-G22 – Bacteria, Determining Resistance of Plastics to (No S/S Document)
• ASTM-G23 – MATERIALS, NONMETALLIC, OPERATING LIGHT-EXPOSURE APPARATUS (CARBON-ARC TYPE) WITH ANDWITHOUT WATER FOR EXPOSURE OF (NO S/S DOCUMENT)
• ASTM-G26 – Materials, Nonmetallic, Operating Light-Exposure Apparatus (Xenon-Arc Type) with and without Water for Exposure of (No S/S Document)
• ASTM-G29 – Standard Practice for Determining Algal Resistance of Polymeric Films
• ASTM-G43 – ACIDIFIED SYNTHETIC SEA WATER (FOG) TESTING (NO S/S DOCUMENT)
• ASTM-G53 – MATERIALS, NONMETALLIC, OPERATING LIGHT AND WATER-EXPOSURE APPARATUS (FLUORESCENT UV-CONDENSATION TYPE) FOR EXPOSURE OF (NO S/S DOCUMENT)
• ASTM-PS93 – Fabricated Shapes and Finished Parts Fabricated from Polylmide Resins (No S/S Document)
• AWWA-C105 – Encasement, Polyethylene, for Ductile-Iron Piping for Water and Other Liquids
• FED-STD-406 – PLASTICS: METHODS OF TESTING (S/S BY - SEE CANCELLATION NOTICE FOR RECOMMENDED SUPERSEDING ASTM TEST METHODS)
• HH-P-256 – Phenolic-condensstion-Products; Laminated (for Electrical Purposes) (S/S by L-L-31)
• JAN-P-13 – PLASTIC-MATERIALS, LAMINATED, THERMOSETTING: SHEETS AND PLATES (S/S BY MIL-P-997, MIL-P-3115, MIL-P-15035 AND MIL-P-15047)
• L-A-499 – ALLYL PLASTIC SHEET, ROD, AND TUBE (NO S/S DOCUMENT)
• L-C-169 – Cellulose Acetate Plastic Sheets (S/S by L-P-504)
• L-C-530 – COATING, PIPE, THERMOPLASTIC RESIN (NO S/S DOCUMENT)
• L-E-210 – ETHYL CELLULOSE MOLDED PLASTICS (USE ASTM D787)
• L-G-425 – GLAZING MATERIAL, FLEXIBLE REINFORCED PLASTIC (S/S BY L-P-1196)
• L-L-31 – LAMINATED THERMOSETTING SHEET, ROD AND TUBE (S/S BY L-P-509A
• L-M-181 – Melamine Molded Plastics (S/S by ASTM-D704)
• L-M-500 – Molding Plastic, Methacrylate (S/S by L-P-380)
• L-M-505 – Molding Plastic, Cellulose Acetate (S/S by L-P-397)
• L-M-520 – MOLDING PLASTIC, POLYSTYRENE
• L-M-525 – MOLDING PLASTIC, POLYSTYRENE, MODIFIED
• L-M-530 – MOLDING PLASTIC, POLYVINYL CHLORIDE, RIGID (S/S BY L-P-1035)
• L-P-001174 – PLASTIC SHEET AND FILM CHLOROTRIFLUOROETHYLENE (CTFE) COPOLYMER, EXTRUDED
• L-P-00514 – Plastic Sheet, Adhesive Coated, Paper Backed (S/S by L-P-528)
• L-P-00524 – PLASTIC SHEET, POLYETHYLENE, LAMINATED, NYLON REINFORCED
• L-P-00529 – Plastic Strip; Plastic Strip with Adhesive Backing; Sign; Plain and Reflectorized
• L-P-1035 – PLASTIC MOLDING MATERIAL, VINYL CHLORIDE POLYMER AND VINYL CHLORIDE-VINYL ACETATE COPOLYMER, RIGID (S/S BY ASTM-D1784)
• L-P-1036 – PLASTIC ROD SOLID, PLASTIC TUBES AND TUBING, HEAVY WALLED, POLYVINYL CHLORIDE, RIGID (S/S BY ASTM-D1784)
• L-P-1040 – Plastic Sheets and Strips (Polyvinyl Fluoride)
• L-P-1041 – PLASTIC MOLDING AND EXTRUSION MATERIAL, VINYLIDENE CHLORIDE VINYL CHLORIDE COPOLYMER (NO S/S DOCUMENT)
• L-P-1125 – Plastic Molding Material Phenolic Resin ( S/S by MIL-M-14)
• L-P-1183 – PLASTIC MOLDING MATERIAL, ACRYLONITRILE-BUTADIENE-STYRENE (ABS), RIGID (S/S BY ASTM-D1788)
• L-P-1196 – PLASTIC SHEET, FLEXIBLE, REINFORCED
• L-P-310 – PHENOLIC MOLDED PLASTICS (S/S BY L-P-1125)
• L-P-344 – PLASTICS, CELLULOSE ACETATE, MOLDED (S/S BY L-M-505)
• L-P-349 – PLASTIC MOLDING AND EXTRUSION MATERIAL, CELLULOSE ACETATE BUTYRATE (S/S BY ASTM-D707)
• L-P-365 – PLASTICS, CELLULOSE NITRATE (PYROXYLIN), SHEETS, RODS AND TUBES
• L-P-380 – Plastic Molding Material, Poly (Methyl Methacrylate) (PMMA)
• L-P-383 – Plastic Material, Polyester Resin, Glass Fiber Base, Low Pressure Laminated
• L-P-385 – PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYCHLOROTRIFLUOROETHYLENE (S/S BY ASTM-D1430)
• L-P-386 – Plastic Material, Cellular, Urethane (Flexible)
• L-P-387/(an interim amendment also exists for this document number as L-P-387A(I 2)) – Plastic Sheet, Laminated, Thermosetting (for Designation Plates) (S/S by ASTM-D709)
• L-P-387/(the base document for this interim amendment is L-P-387A(2) NOT 1) – PLASTIC SHEET, LAMINATED, THERMOSETTING (FOR DESIGNATION PLATES) (S/S BY ASTM-D709)
• L-P-389 – PLASTIC MOLDING MATERIAL, FEP FLUOROCARBON, MOLDING & EXTRUSION (REPLACED BY ASTM-D2116-81
• L-P-390 – Plastic, Molding and Extrusion Material, Polyethylene and Copolymers (Low, Medium, and High Density) (Future Acquisition for this Material Should Refer to ASTM-D4976 Polyethylene Plastics Molding and Extrusion Materials
• L-P-391 – Plastic Sheets, Rods and Tubing, Rigid Cast, Methacrylate (Multiapplication) (S/S by ASTM-D4802 and ASTM-D5436)
• L-P-392 – PLASTIC MOLDING MATERIAL, ACETAL, INJECTION AND EXTRUSION (S/S BY ASTM-D4181)
• L-P-393 – Plastic Molding Material Polycarbonate, Injection and Extrusion (S/S by ASTM-D3935)
• L-P-394 – PLASTIC MOLDING MATERIAL, (PROPYLENE PLASTICS, INJECTION AND EXTRUSION) (S/S BY ASTM-D4101)
• L-P-395 – Plastic Molding and Extrusion Material, Nylon, Glass Fiber Reinforced (S/S by ASTM-D4066)
• L-P-396 – PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYSTYRENE (S/S BY ASTM-D4549)
• L-P-397 – PLASTIC MOLDING MATERIAL, CELLULOSE ACETATE (S/S BY ASTM-D706)
• L-P-398 – PLASTIC MOLDING MATERIAL, STYRENE-BUTADIENE (S/S BY ASTM-D4549)
• L-P-399 – PLASTIC MOLDING AND EXTRUSION MATERIAL STYRENE-ACRYLONITRILE COPOLYMERS (S/S BY ASTM-D4203)
• L-P-401 – PLASTIC MOLDING MATERIAL, UREA-FORMALDEHYDE
• L-P-403 – Plastic Molding Material, Polytetrafluoroethylene (TFE - Fluocarbon) (Use ASTM-D1457)
• L-P-406 – PLASTICS, ORGANIC, GENERAL SPECIFICATION, TEST METHODS (S/S BY FED. STD. 406)
• L-P-410 – Plastic, Polymide (Nylon), Rigid: Rods, Tubes, Flats, Molded and Cast Parts
• L-P-501 – PLASTIC POLYVIWYLIDENE CHLORIDE (SARAN) MOLDED (USE L-P-1041)
• L-P-503 – PLASTIC ROD, SOLID, POLYVINYL CHLORIDE, RIGID (S/S BY L-P-1036)
• L-P-504 – Plastic Sheet and Film, Cellulose Acetate
• L-P-505 – Plastic Panels, Corrugated, Translucent, Glazing (No S/S Document)
• L-P-506 – PLASTIC SHEET & FILM, POLYSTYRENE BIAXIALLY ORIENTED (REPLACED BY ASTM D1463-81
• L-P-507 – PLASTIC SHEET, EXTRUDED ACRYLIC
• L-P-508 – PLASTIC SHEET, LAMINATED, DECORATIVE AND NONDECORATIVE (S/S BY NEMA-LD3 AND NEMA-LD3.1)
• L-P-509 – PLASTIC SHEET, ROD AND TUBE, LAMINATED, THERMOSETTING (S/S BY ASTM-D709)
• L-P-510 – PLASTIC SHEET (SHEETING) VINYL CHLORIDE POLYMER AND VINYL CHLORIDE-VINYL ACETATE COPOLYMER, RIGID (S/S BY L-P-535)
• L-P-511 – Plastic Sheet, Laminated, Thermosetting, Cotton Fabric Base, Phenolic-Resin, Post-Forming
• L-P-512 – PLASTIC SHEET (SHEETING); POLYETHYLENE (S/S BY ASTM-D2103)
• L-P-513 – Plastic Sheet and Insulation Sheet, Electrical (Laminated, Thermosetting, Paper-Base, Phenolic-Resin) (S/S by ASTM-D709)
• L-P-515 – Plastic Sheet, Polystyrene, Modified (Use L-P-526 and L-P-527)
• L-P-516 – Plastic Sheet and Plastic Rod, Thermosetting, Cast
• L-P-517 – Plastic Sheet, Scribe-Coated (No S/S Document)
• L-P-519 – Plastic Sheet: Tracing, Glazed and Matter Finish
• L-P-523 – Plastic Sheet and Film, FEP-Fluorocarbon, Extruded
• L-P-526 – Plastic Sheet, Styrene-Acrylonitrile (No S/S Document)
• L-P-527 – Plastic Sheet, Styrene-Butadiene
• L-P-528 – Plastic Sheet, Pressure Sensitive Adhesive Coated, Paper-Backed (S/S by A-A-2681)
• L-P-535 – Plastic Sheet (Sheeting): Plastic Strip: Poly (Vinyl Chloride) and Poly (Vinyl chloride-Vinyl Acetate), Rigid
• L-P-540 – PLASTIC TUBE AND TUBING, HEAVY WALLED, POLYVINL CHLORIDE, RIGID (S/S BY L-P-1036)
• L-P-550 – PLASIC VINYL CHLORIDE, CARTOGRAPHIC SHEETING(SUPERSEDED BL L-P 535)
• L-P-590 – PLASTIC COMPOUNDS, MOLDING AND EXTRUSION, POLYETHYLENE (S/S BY FED SPEC L-P-390)
• L-T-0075 – Tape, Pipe-Coating; Pressure-Sensitive, Polyethylene
• L-U-671 – Urea Molded Plastic (S/S by L-P-401)