FSC-9330: Plastics Fabricated Materials

Documents

• ASTM-D3045 – Heat Aging of Plastics Without Load
• ASTM-D3083 – Sheeting, Plastic, for Pond, Canal, and Reservoir Lining, Flexible Poly(Vinyl Chloride), Standard Specification for (No S/S Document)
• ASTM-D3159 – Materials, Molding and Extrusion, Modified Etfe-Fluoropolymer
• ASTM-D3220 – MOLDING & EXTRUSION MATERIALS, REINFORCED THERMOPLASTIC POLYESTER - 26 JUN 81 (REFER TO ASTM-D4507)
• ASTM-D3221 – MOLDING & EXTRUSION MATERIALS, THERMOPLASTIC POLYTEREPHTHALATE - 26 JUN 81 (REFER TO ASTM D4507)
• ASTM-D3222 – Materials, Molding Extrusion and Coating, Unmodified Poly(Vinylidene Fluoride) (PVDF)
• ASTM-D3275 – Materials, E-CTFE-Fluoroplastic Molding, Extrusion, and Coating
• ASTM-D3293 – SHEET, RESIN MOLDED, PTFE (NO S/S DOCUMENT)
• ASTM-D3295 – PTFE Tubing, Miniature Beading and Spiral Cut Tubing
• ASTM-D3307 – Perfluoroalkoxy (PFA) - Fluorocarbon resin Molding and Extrusion Materials
• ASTM-D3308 – Tape, Resin Skived, PTFE
• ASTM-D3368 – Sheet and Film, FEP-Fluorocarbon
• ASTM-D3369 – Film, Resin Cast, Polytetrafluoroethylene (PTFE) (No S/S Document)
• ASTM-D3417 – Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) (No S/S Document)
• ASTM-D3418 – Polymers by Differential Scanning Calorimetry, Transition Temperatures and Enthalpies of Fusion and Crystallization of
• ASTM-D3479 – Composites, Resin Matrix, Tension-Tension Fatigue of Oriented Fiber
• ASTM-D3529-D3529M – Matrix Solids Content and Matrix Content of Composite Prepreg
• ASTM-D3530-D3530M – Standard Test Method for Volatiles Content of Composite Material Prepreg
• ASTM-D3575 – Materials, Flexible Cellular, Made From Olefin Polymers
• ASTM-D3595 – Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
• ASTM-D3800 – Fibers, High Modulus, Density of
• ASTM-D3841 – Glass-Fiber-Reinforced Polyester Plastic Panels
• ASTM-D3846 – Plastics, Reinforced, in Plane Shear Strength of
• ASTM-D3892 – Plastics, Packaging/Packing of
• ASTM-D3935 – Material, Polycarbonate (PC) Unfilled and Reinforced
• ASTM-D4000 – Plastic, Specifying Materials
• ASTM-D4019 – PLASTICS, MOISTURE IN PHOSPHORUS PENTOXIDE, BY COULOMETRIC REGENERATION OF (NO S/S DOCUMENT)
• ASTM-D4020 – Materials, Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion
• ASTM-D4065 – Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
• ASTM-D4066 – Nylon Injection and Extrusion Materials (PA), Standard Classification System for
• ASTM-D4067 – Materials, Molding and Extrusion, Reinforced and Filled Poly (Phenylene Sulfide) (PPS) Injection, using ASTM Methods
• ASTM-D4092 – Plastics: Dynamic Mechanical Properties
• ASTM-D4101 – Polypropylene Injection and Extrusion Materials
• ASTM-D4102 – Fibers, Carbon, Thermal Oxidative Resistance of
• ASTM-D4181 – Acetal (POM) Molding and Extrusion Materials (S/S by ASTM-D6778)
• ASTM-D4203 – Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
• ASTM-D4216 – Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds
• ASTM-D4225 – Sheeting, Styrene-Butadiene (No S/S Document)
• ASTM-D4350 – Plastics and Fillers Corrosivity Index of
• ASTM-D4397 – Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications
• ASTM-D4473 – Plastics: Dynamic Mechanical Properties: Cure Behavior
• ASTM-D4507 – THERMOPLASTIC POLYESTER (TPES) MATERIALS (NO S/S DOCUMENT)
• ASTM-D4549 – Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
• ASTM-D4591 – Temperatures and Heats, Determining, of Transition of Fluoropolymers by Differential Scanning Calorimetry
• ASTM-D4617 – Phenolic Compounds, (PF) (No S/S Document)
• ASTM-D4634 – Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)
• ASTM-D4673 – Molding and Extrusion Materials, Acrylonitrile-Butadiene-Styrene (Abs), Plastics and Alloys
• ASTM-D4801 – Polyethylene Sheeting in Thickness of 0.25MM (0.010 In.) and Greater
• ASTM-D4802 – Sheet, Plastic, Poly (Methylmethacrylate) Acrylic
• ASTM-D4892 – Pitch, Solid, (Helium Pycnometer Method), Density of
• ASTM-D494 – ACETONE EXTRACTION OF PHENOLIC MOLDED OR LAMINATED (NO S/S DOCUMENT)
• ASTM-D495 – Insulation, Solid Electrical, High-voltage, Low-Current, Dry Arc Resistance of
• ASTM-D4976 – Polyethylene Plastics Molding and Extrusion Materials
• ASTM-D5204 – Materials, Molding and Extrusion, Polyamide (PAI)
• ASTM-D5205 – System for Polyetherimide (PEI) Materials
• ASTM-D5213 – Film,Polymetric Resin,for Electrical Insulation and Dielectric Applications
• ASTM-D5229-D5229M – Properties, Moisture Absorption, and Equilibrium Conditioning of Polymer Matrix Composite Materials
• ASTM-D542 – Index of Refraction of Transparent Organic Plastics
• ASTM-D543 – Plastic to Chemical Reagents, Resistance of
• ASTM-D5436 – Cast Poly (Methyl Methacrylate) Plastic Rods, Tubes, and Shapes
• ASTM-D568 – RATE OF BURNING AND/OR EXTENT AND TIME OF BURNING OF FLEXIBLE PLASTICS IN A VERTICAL POSITION, STANDARD TEST METHOD FOR (NO S/S DOCUMENT)
• ASTM-D569 – THERMOPLASTIC MOLDING MATERIALS, MEASURING THE FLOW PROPERTIES OF (NO S/S DOCUMENT)
• ASTM-D570 – Water Absorption of Plastics
• ASTM-D5948 – Compounds, Molding, Thermosetting
• ASTM-D617 – QUALITY PUNCHING OF PHENOLIC LAMINATED SHEETS (NO S/S DOCUMENT)
• ASTM-D618 – Plastics Conditioning for Testing
• ASTM-D621 – PLASTICS UNDER LOAD, DEFORMATION OF (NO S/S DOCUMENT)
• ASTM-D635 – Plastics in a Horizontal Position, Rate of Burning and / or Extent and Time of Burning of
• ASTM-D637 – SURFACE IRREGULARITIES OF FLAT TRANSPARENT PLASTIC SHEETS (NO S/S DOCUMENT)
• ASTM-D638 – Tensile Properties of Plastics
• ASTM-D638M – PLASTICS (METRIC), TENSILE PROPERTIES OF (NO S/S DOCUMENT)
• ASTM-D648 – Plastics, Deflection Temperature of, Under Flexural load in the Edgewise Position (No S/S Document)
• ASTM-D651 – INSULATING MATERIALS, MOLDED ELECTRICAL, TENSILE STRENGTH OF - 28 DEC 1984
• ASTM-D671 – PLASTICS, FLEXURAL FATIGUE OF, BY CONSTANT-AMPLITUDE-OF-FORCE, STANDARD TEST METHODS FOR (NO S/S DOCUMENT)
• ASTM-D673 – PLASTICS, MAR RESISTANCE OF (NO S/S DOCUMENT)
• ASTM-D6778 – Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials
• ASTM-D6779 – Polyamide Molding and Extrusion Materials (PA), Standard Classification System for and Basis of Specification for
• ASTM-D695 – Plastics, Properties of Compressive Rigid
• ASTM-D695M – Properties of Compressive Rigid Plastics (Metric) (No S/S Document)
• ASTM-D696 – Linear Thermal Expansion of Plastics, Coefficient of, Between −30 Deg.C and 30 Deg.C with a Vitreous Silica Dilatometer
• ASTM-D702 – Cast Methacrylate Plastic Sheets, Rods, Tubes, and Shapes (No S/S Document)
• ASTM-D703 – POLYSTYRENE MOLDING & EXTRUSION MATERIALS - 26 JUN 81
• ASTM-D704 – Melamine-Formaldehyde Molding Compounds
• ASTM-D706 – Compounds, Cellulose Acetate Molding and Extrusion
• ASTM-D707 – Cellulose Acetate Butyrate Molding and Extrusion Compounds
• ASTM-D709 – Materials, Laminated Thermosetting
• ASTM-D729 – VINYLIDENE CHLORIDE MOLDING COMPOUNDS (NO S/S DOCUMENT)
• ASTM-D732 – Plastics by Punch Tool, Shear Strength of
• ASTM-D746 – Plastics and Elastomers by Impact, Brittleness Temperature of
• ASTM-D756 – DETERMINATION OF WEIGHT AND SHAPE CHANGES OF PLASTICS UNDER ACCELERATED SERVICE CONDITIONS (NO S/S DOCUMENT)
• ASTM-D757 – PLASTICS, RIGID, IN A HORIZONTALION, INCANDESCENCE RESISTANCE OF (NO S/S DOCUMENT)
• ASTM-D785 – Plastics and Electrical Insulating Materials, Rockwell Hardness of
• ASTM-D787 – Ethyl Cellulose Molding and Extrusion Compounds
• ASTM-D790 – Plastics and Electrical Insulating Materials, Flexural Properties of Unreinforced and Reinforced
• ASTM-D790M – PROPERTIES, FLEXURAL, OF UNREINFORCED AND REINFORCED PLASTICS AND ELECTRICAL INSULATING MATERIALS (METRIC) (NO S/S DOCUMENT)
• ASTM-D792 – Density and Specific Gravity (Relative Density) of Plastics by Displacement
• ASTM-D793 – PLASTICS CONTAINING CHLORINE, SHORT TIME STABILITY AT ELEVATED TEMPERATURES OF - 1949
• ASTM-D882 – Plastic Sheeting, Tensile Properties of Thin
• ASTM-D883 – Plastics, Standard Terminology Relating to
• ASTM-D953 – Plastics, Bearing Strength of