FSC-9330: Plastics Fabricated Materials

Documents

• A-A-1280 – Sorbent, Oil (Roll, Sweep, Pad)
• A-A-1281 – Sorbent, of (Particulate)
• A-A-1282 – Sorbent, Oil (Enclosed)
• A-A-2681 – PLASTIC SHEET, PRESSURE SENSITIVE ADHESIVE COATED, PAPER-BACKED (S/S BY A-A-2848)
• A-A-2848 – Plastic Sheet, Polyethylene Terephthalate (PET) and Glycol-Modified Polyethylene Terephthalate (PETG) (No S/S Document)
• A-A-56021 – Plastic Sheet, Polyethylene, Terephthalate (for Cartographic Operations) (No S/S Document)
• A-A-56029 – Molding Material, Sheet, Fiber Reinforced (No S/S Document)
• A-A-59485 – Plastic Material, Pressure Sensitive Adhesive, for Aerospace Identification and Marking
• A-A-59502 – Plastic Sheet, Polycarbonate
• A-A-59504 – Plastic Sheet (Sheeting), Pressure Sensitive Adhesive Coated, Cellulose Acetate, Transparent (No S/S Document)
• A-A-59602 – Tube, Spiral Wrap, Polyethylene, Polytetrafluoroethylene and Polyamide
• A-A-59875 – Sealing Compound (Fairing Compound), Polysulfide, for Waterborne Main Propulsion Shafting Coverings on U.S. Naval Surface Ships and Submarines
• ASTM-C581 – Resins, Thermosetting, Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service, Determining Chemical Resistance of
• ASTM-C582 – Plastic (RTP) Laminates for Corrosion Resistant Equipment, Contact-Molded Reinforced Thermosetting
• ASTM-D1003 – Plastics, Transparent, Haze and Luminous Transmittance of
• ASTM-D1004 – Tear Resistance (Graves Tear) of Plastic Film and Sheeting
• ASTM-D1043 – Plastics as a Function of Temperature by Means of a Torsion Test, Stiffness Properties of
• ASTM-D1044 – Surface Abrasion, Resistance of Transparent Plastics to
• ASTM-D1047 – Poly(Vinyl Chloride) Jacket for Wire and Cable
• ASTM-D1181 – Plastic, Sheet, Warpage of - 10 SEP 56 (Use FED-STD-406)
• ASTM-D1203 – Plastics, Using Activated Carbon Methods, Volatile Loss from
• ASTM-D1204 – Thermoplastic, Nonrigid, Sheeting or Film at Elevated Temperature, Linear Dimensional Changes of
• ASTM-D1238 – Thermoplastics by Extrusion Plastomer, Melt Flow Rates of
• ASTM-D1242 – RESISTANCE OF PLASTIC MATERIALS TO ABRASION (NO S/S DOCUMENT)
• ASTM-D1248 – Polyethylene Plastics Extrusion Materials For Wire And Cable
• ASTM-D1303 – CHLORINE, TOTAL, IN VINYL CHLORIDE POLYMERS AND COPOLYMERS (NO S/S DOCUMENT)
• ASTM-D1430 – Polychlorotrifluoroethylene (PCTFE) Plastics
• ASTM-D1431 – STYRENE ACRYLONITRILE COPOLYMER MOLDING & EXTRUSION MATERIALS - 26 JUN 81 (S/S BY ASTM D 4203-82)
• ASTM-D1433 – PLASTIC SHEETING, FLEXIBLE THIN, RATE OF BURNING AND/OR EXTENT & TIME OF BURNING, SUPPORTED ON A 45 DEG. INCLINE - 1 JUL 77 (REFER TO ASTM-D4549
• ASTM-D1435 – Plastics, Outdoor Weathering of
• ASTM-D1457 – POLYTETRAFLUOROETHYLENE (PTFE) MOLDING AND EXTRUSION MATERIALS (NO S/S DOCUMENT)
• ASTM-D1463 – BIAXIALLY ORIENTED STYRENE PLASTICS SHEET, STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)
• ASTM-D1494 – Panels, Reinforced Plastics, Diffuse Light Transmission Factor of
• ASTM-D1499 – FILTERED OPEN-FLAME CARBON-ARC EXPOSURES OF PLASTICS
• ASTM-D150 – AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
• ASTM-D1501 – PLASTICS, RECOMMENDED PRACTICE FOR EXPOSURE OF, TO FLUORESCENT SUNLAMP - 18 MAR 71
• ASTM-D1502 – PLASTIC, CORRUGATED REINFORCED, TRANVERSE LOAD OF, PANELS - 19 SEP 60
• ASTM-D1505 – Density of Plastics by the Density-Gradient Technique
• ASTM-D1525 – Plastics, Temperature of Vicat Softening
• ASTM-D1547 – Extruded Acrylic Plastic Sheet (No S/S Document)
• ASTM-D1562 – Cellulose Acetate Propionate Molding and Extrusion Compounds
• ASTM-D1600 – Plastics, Abbreviated Terms Relating to
• ASTM-D1621 – Plastics, Rigid Cellular, Compressive Properties of
• ASTM-D1622 – Plastics, Rigid Cellular, Apparent Density of
• ASTM-D1623 – Plastics, Rigid Cellular, Tensile and Tensile Adhesion Properties of
• ASTM-D1638 – URETHANE FOAM ISOCYANATE RAW MATERIALS - 27 JUN 74
• ASTM-D1672 – POLYMERIC MATERIALS TO HIGH ENERGY RADIATION, EXPOSURE OF (NO S/S DOCUMENT)
• ASTM-D1675 – Polytetrafluoroethylene Tubing
• ASTM-D1693 – Environmental Stress-Cracking of Ethylene Plastics
• ASTM-D1708 – Plastics by Use of Microtensile Specimens, Tensile Properties of
• ASTM-D1709 – Impact Resistance of Plastic Film by the Free-Falling Dart Method
• ASTM-D1710 – Tubing, Extruded and Compression Molded Polytetrafluoroethylene (PTFE) Rod and Heavy Walled
• ASTM-D1746 – Plastic Sheeting, Transparency of
• ASTM-D1763 – Resins, Epoxy, Standard Specification for
• ASTM-D1784 – Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds, Rigid Poly (Vinyl Chloride) (PVC)
• ASTM-D1788 – PLASTICS, RIGID ACRYLONITRILE-BUTADIENE-STYRENE (ABS) (S/S BY ASTM-D4673)
• ASTM-D1790 – Sheeting, Plastic, by Impact, Brittleness Temperature of
• ASTM-D1892 – STYRENE-BUTADIENE MOLDING AND EXTRUSION MATERIALS (S/S BY ASTM-D4549)
• ASTM-D1893 – FILM, PLASTIC, BLOCKING OF, STANDARD TEST METHOD OF (NO S/S DOCUMENT)
• ASTM-D1894 – Film, Plastic, and Sheeting, Static and Kinetic Coefficients of Friction of
• ASTM-D1895 – Materials, Plastic, Apparent Density, Bulk Factor, and Pourability of
• ASTM-D1897 – MATERIALS, THERMOPLASTIC MOLDING AND EXTRUSION, INJECTION MOLDING TEST SPECIMENS OF (NO S/S DOCUMENT)
• ASTM-D1898 – PLASTICS, SAMPLING OF (NO S/S DOCUMENT)
• ASTM-D1921 – Materials, Plastic, Particle Size (Sieve Analysis) of, Standard Test Methods for
• ASTM-D1922 – Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
• ASTM-D1925 – YELLOWNESS INDEX OF PLASTICS (NO S/S DOCUMENT)
• ASTM-D1928 – TEST SHEETS AND TEST SPECIMENS, POLYETHYLENE, COMPRESSION-MOLDED, PREPARATION OF (NO S/S DOCUMENT)
• ASTM-D1929 – Temperature, Ignition of Plastics, Determining, Standard Test Method for (No S/S Document)
• ASTM-D2103 – Polyethylene Film and Sheeting
• ASTM-D2115 – Oven Heat Stability of Poly (Vinyl Chloride) Compositions
• ASTM-D2116 – Standard Specification for FEP Resin Molding and Extrusion Materials
• ASTM-D2122 – Pipe and Fittings, Thermoplastic, Determining Dimensions of
• ASTM-D2126 – Plastics, Response of Rigid Cellular, to Thermal and Humid Aging
• ASTM-D2287 – Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
• ASTM-D229 – Materials Rigid, Sheet and Plate, used for Electrical Insulation
• ASTM-D2290 – Plastic or Reinforced Plastic Pipe, Apparent Hoop Tensile Strength
• ASTM-D2343 – Glass Fiber Strands, Yarns, and Rovings used in Reinforced Plastics, Tensile Properties of
• ASTM-D2344-D2344M – Polymer Matrix composite Materials and Their Laminates, Short- Beam Strength of
• ASTM-D2393 – EPOXY RESINS AND RELATED COMPONENTS, VISCOSITY OF (NO S/S DOCUMENT)
• ASTM-D2411 – CELLULOSE ACETATE BUTYRATE FILM AND SHEETING FOR FABRICATING AND FORMING (NO S/S DOCUMENT)
• ASTM-D2457 – Films, Plastic, and Solid Plastics, Specular Gloss of
• ASTM-D2471 – Resins, Reacting Thermosetting, Gel Time and Peak Exothermic Temperature of (No S/S Document)
• ASTM-D256 – Plastics, Determining the IZOD Pendulum Impact Resistance of
• ASTM-D2565 – Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
• ASTM-D257 – Resistance DC or Conductance of Insulating Materials
• ASTM-D2582 – Film, Plastic, and Thin Sheeting, Puncture-Propagation Tear Resistance of
• ASTM-D2583 – PLASTICS, RIGID, BY MEANS OF A BARCOL IMPRESSOR, INDENTATION HARDNESS OF
• ASTM-D2584 – Resins, Cured Reinforced, Ignition Loss of
• ASTM-D2732 – FILM AND SHEETING, PLASTIC, UNRESTRAINED LINEAR THERMAL SHRINKAGE OF
• ASTM-D2733 – PLASTICS, STRUCTURAL REINFORCED, AT ELEVATED TEMPERATURES, INTERLAMINAR SHEAR STRENGTH OF - 24 DEC 70 (USE ASTM D3846)
• ASTM-D2734 – Plastics, Reinforced, Void Content of
• ASTM-D2842 – Water Absorption of Rigid Cellular Plastics
• ASTM-D2843 – Plastics, Density of Smoke from the Burning of Decomposition of
• ASTM-D2856 – Plastics by the Air Pychometer, Rigid Cellular, Open Cell Content of, Standard Test Method for (No S/S Document)
• ASTM-D2863 – Plastics, Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of (Oxygen Index)
• ASTM-D2990 – Plastics, Tensile, Compressive, and Flexural Creep and Creep-Rupture of
• ASTM-D3013 – Compounds, Epoxy Molding
• ASTM-D3014 – Plastics, Rigid Thermoset Cellular, in a Vertical Position, Flame Height, Time of Burning, and Loss of Weight of (Np S/S Document)
• ASTM-D3020 – Sheeting, Plastic, for Pond, Canal, and Reservoir Lining, Polyethylene and Ethylene Copolymer, Standard Specification for (No S/S Document)
• ASTM-D3029 – SPECIMENS, FLAT RIGID PLASTIC, IMPACT RESISTANCE OF, BY MEANS OF A TUP (FALLING WEIGHT) (NO S/S DOCUMENT)