FSC-8010: Paints, Dopes, Varnishes, and Related Products

Documents

• ASTM-D3623 – Panels, Antifouling, in Shallow Submergence
• ASTM-D3624 – Mercury in Paint by Atomic Absorption Spectroscopy, Low Concentrations of
• ASTM-D3718 – Paint, Chromium in, by Atomic Absorption Spectroscopy, Low Concentrations of
• ASTM-D3725 – Semiquantitative Determination of Fish Oil in Drying Oils and Drying Oil Fatty Acids by Gas-Liquid Chromatography (No S/S Document)
• ASTM-D3732 – Coatings, Ultraviolet-Cured, Reporting Cure Times of
• ASTM-D3792 – Water Content of Coatings by Direct Injection into a Gas Chromatoghraph
• ASTM-D387 – Color and Strength of Color Pigments with a Mechanical Muller
• ASTM-D3924 – Paint, Varnish, Lacquer, and Related Materials, Conditioning and Testing, Standard Environment for
• ASTM-D3925 – Paints and Related Pigmented Coatings, Sampling Liquid
• ASTM-D3960 – Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
• ASTM-D4017 – Water in Paints and Paint Materials by Karl Fischer Method
• ASTM-D4060 – Coatings, Organic, by the Taber Abraser, Abrasion Resistance of
• ASTM-D4287 – Viscometer, High-Shear Viscosity Using a Cone/Plate
• ASTM-D432 – SOLUTIONS BY GAS CHROMATOGRAPHY, FREE URETHANE PREPOLYMERS & COATINGS TOLUENE DIISOCYANATED IN - 30 MAY 80
• ASTM-D4400 – Paints Using a Multinotch Applicator, Sag Resistance of
• ASTM-D444 – Pigment, Zinc Yellow (Zinc Chromate Yellow) Chemical Analysis of, Standard Test Methods for
• ASTM-D476 – Titanium Dioxide Pigments, Dry Pigmentary, Standard Classification for
• ASTM-D478 – Pigments, Zinc Yellow (Zinc Chromate)
• ASTM-D480 – Aluminum Powders and Pastes, Flaked, Sampling and Testing of
• ASTM-D50 – Iron Manganese, Pigments Containing, Yellow, Orange, Red, and Brown, Chemical Analysis of
• ASTM-D520 – Pigment, Dust, Zinc
• ASTM-D521 – Zinc Dust (Metallic Zinc Powder), Chemical Analysis of - 25 Oct 74
• ASTM-D522 – Mandrel Bend Test of Attached Organic Coatings
• ASTM-D523 – Gloss, Specular
• ASTM-D555 – Oils, Drying, Testing, Standard Guide for (No S/S Document)
• ASTM-D562 – Paints, Consistency of, Measuring Krebs Unit (KU) Viscosity Using a Stormer-Tye Viscometer
• ASTM-D563 – PHTHALIC ANHYDRIDE CONTENT OF ALKYD RESIN & RESIN SOLUTION STANDARD TEST METHOD FOR (NO S/S DOCUMENT)
• ASTM-D564 – LIQUID PAINT DRIERS, STANDARD TEST METHODS FOR
• ASTM-D600 – Standard Specification for Liquid Paint Driers
• ASTM-D604 – Pigment, Diatomaceous Silica (No S/S Document)
• ASTM-D605 – Magnesium Silicate Pigment (TALC)
• ASTM-D607 – Ground, Wet Mica Pigments
• ASTM-D609 – Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products, Preparation of Cold-Rolled
• ASTM-D610 – Degree of Rusting on Evaluating Painted Steel Surfaces
• ASTM-D656 – TONER, PURE TOLUIDINE RED - 30 SEP 49
• ASTM-D659 – PAINTS, EVALUATING DEGREE OF CHALKING OF, STANDARD METHOD OF (S/S BY ASTM-D4214)
• ASTM-D660 – Paints, Exterior, Evaluating Degree of Checking of
• ASTM-D661 – Paints, Exterior, Evaluating Degree of Cracking of
• ASTM-D662 – Paints, Exterior, Evaluating Degree of Erosion of
• ASTM-D7091 – Film, Dry, Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals, Nondestructive Measurement of
• ASTM-D711 – Paint, No-Pick-Up Time of Traffic
• ASTM-D714 – PAINTS, BLISTERING OF, EVALUATING DEGREE OF -
• ASTM-D717 – PIGMENT, MAGNESIUM SILICATE, ANALYSIS OF- 29OCT 73 (REAPPROVED 1979)
• ASTM-D768 – IRON, YELLOW, OXIDE HYDRATED - 147
• ASTM-D772 – Paints, Exterior, Flaking (Scaling), Evaluating Degree of
• ASTM-D822-D822M – Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
• ASTM-D823 – Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
• ASTM-D83 – Pigment, Red Lead
• ASTM-D847 – Benzene, Toluene, Xylenes, Solvent Napthas, and Similar Industrial Aromatic Hydrocarbons, Acidity of
• ASTM-D853 – Hydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of Industrial Aromatic Hydrocarbons (No S/S Document)
• ASTM-D869 – Paint, Settling of, Evaluating Degree of
• ASTM-D891 – Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
• ASTM-D912 – Paints, Antifouling, Cuprous Oxide for Use in (No S/S Document)
• ASTM-D968 – Abrasion Resistance of Organic Coatings by Falling Abrasive
• ASTM-D969 – Paint, Degree of Bleeding of Traffic, Laboratory Determination of (See Notice of Withdrawal for Replacement Information)
• ASTM-D970 – PIGMENTS, PARA RED & TOLUIDINE RED - 29 OCT 73 (NO S/S DOCUMENT)
• ASTM-E28 – Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons,  by Ring-and-Ball Apparatus
• ASTM-E299 – Solvents, Organic, Trace Amounts of Peroxides in, Standard Test Method for
• ASTM-E308 – System, CIE, Computing the Colors of Objects by Using the
• ASTM-E97 – SPECIMENS, OPAQUE, BY BROAD-BAND FILTER REFLECTOMETRY, DIRECTIONAL REFLECTANCE, 45-DEG 0-DEG OF, STANDARD TEST METHOD FOR (S/S BY ASTM-E1347)
• ASTM-F718 – Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet
• ASTM-F940 – Coatings (Paint), Protective, Use in Marine Construction and Shipbuilding , Quality Control Receipt Inspection Procedures, Standard Practice for
• ASTM-F941 – Marine Surface Preparation and Coating Application, Inspection of, Standard Practice for
• ASTM-G7 – Materials, Nonmetallic, Atmospheric Environmental Exposure Testing of
• ASTM-G7-G7M – Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
• AWWA-C203 – Pipelines, Steel Water Coal-Tar Protective Coating and Lining for Enamel and Tape-Hot Applied
• AWWA-C210 – Pipelines, Steel Water Epoxy Coating Systems for the Interior and Exterior of
• AWWA-C213 – Epoxy Coating, Fusion-Bonded, for the Interior & Exterior of Steel Water Pipelines
• AWWA-C550 – Protective Epoxy Interior Coatings for Valves and Hydrants
• AWWA-D102 – Tanks, Steel Water-Storage Painting for
• DOD-C-24654 – COATINGS, EPOXY, PORTABLE WATER TANKS (METRIC) (S/S BY MIL-PRF-23236)
• DOD-E-1265 – ENAMEL, EXTERIOR, ALKYD, OCEAN GRAY, NO. 17 (FORMULA NO. 5-0) (METRIC) (S/S BY DOD-E-24635 OR FED-STD-595)
• DOD-E-18210 – ENAMEL, INTERIOR, DECK, RED (FORMULA NO. 23) (METRIC) (S/S BY DOD-E-24635 & FED-STD-595)
• DOD-E-18214 – ENAMEL, INTERIOR, DECK, DARK GREEN (FORMULA NO. 19) (METRIC) (S/S BY DOD-E-24635 & FED-STD-595)
• DOD-E-698 – ENAMEL, ALKYD, DECK, BLACK (FORMULA NO. 24) (METRIC) (S/S BY DOD-E-24635 & FED-STD-595)
• DOD-E-699 – ENAMEL, EXTERIOR, DECK, GRAY (FORMULA NO. 20) (METRIC) (S/S BY DOD-E-24635 & FED-STD-595)
• DOD-P-15144 – PAINT, FORMULA NO. 34 (BINDER FOR ANTI SWEAT COATINGS) (METRIC) (NO S/S DOCUMENT)
• DOD-P-15146 – PAINT, EXTERIOR, DULL BLACK (FORMULA NO. 104) (METRIC) (S/S BY DOD-E-24635, FED-STD-595)
• DOD-P-15183 – PAINT, EXTERIOR, ALKYD, GRAY, NO.11 (FORMULA NO. 109) (METRIC) (NO S/S DOCUMENT)
• DOD-P-15328/(an interim amendment also exists for this document number as DOD-P-15328D(I2) NOT 1) – Primer (Wash), Pretreatment (Formula NO. 117 for Metals) (Metric) (S/S by TT-C-490)
• DOD-P-15328/(the base document for this interim amendment is DOD-P-15328D(1) NOT 3) – PRIMER (WASH), PRETREATMENT (FORMULA NO. 117 FOR METALS) (METRIC) (NO S/S DOCUMENT)
• DOD-P-17545 – PRIMER COATING, ALKYD-RED LEAD TYPE, FORMULA NO. 116 AND FORMULA NO. 116D (METRIC) (S/S BY TT-P-645)
• DOD-P-24555 – Paint, Aluminum, Heat-Resisting (650 Degree C), Low-Emissivity (0.40 or Less) (Metric)
• DOD-P-24588 – PAINT, ANTIFOULING, VINYL, CAMOUFLAGE (FORMULAS NO. 170, 171, 172, AND 173) (METRIC) (S/S BY DOD-P-24647 NOW MIL-PRF-24647)
• DOD-P-24631/4 – PAINT, CHLOROSULFONATED, POLYETHYLENE, BLACK, NAVY FORMULA 187, TYPE I (METRIC) (NO S/S DOCUMENT)
• DOD-P-24631/5 – PAINT, CHLOROSULFONATED, POLYETHYLENE, DARK GREY, NAVY FORMULA 188, TYPE II (METRIC) (NO S/S DOCUMENT)
• DOD-P-24631/6 – PAINT, CHLOROSULFONATED, POLYETHYLENE, WHITE, NAVY FORMULA 189, TYPE III (METRIC) (NO S/S DOCUMENT)
• DOD-P-24655 – PAINT, UNDERWATER HULL, ANTICORROSION (METRIC) (S/S BY DOD-P-24647)
• DOD-PRF-24648 – Primer Coating, Zinc Dust Pigmented for Exterior Steel Surfaces (Metric) (S/S by A-A-59745)
• DOD-R-21417 – RESIN, CHLORINATED ALKYD, SOLUTION (METRIC) (S/S BY DOD-E-24607)
• DOD-V-15218 – VARNISH (MIXING, PHENOLIC) (METRIC) (NO S/S DOCUMENT)
• FED-STD-141 – Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing
• FED-STD-290 – PAINT, OIL
• FED-STD-370 – Instrumental Photometric Measurements of Retroreflective Materials and Retroreflective Devices
• FED-STD-373 – Instrumental Color Measurements of Retroreflective Materials and Devices Under Nighttime Illuminating and Viewing Conditions
• FED-STD-595 – Colors Used in Government Procurement (S/S By SAE-AMS-STD-595)
• FED-STD-595/10032 – Brown, Gloss (S/S By SAE-AMS-STD-595)
• FED-STD-595/10045 – Brown, Gloss (S/S By SAE-AMS-STD-595)
• FED-STD-595/10049 – Brown, Gloss (S/S By SAE-AMS-STD-595)
• FED-STD-595/10055 – Brown, Gloss, Highway (S/S By SAE-AMS-STD-595)