FSC-8010: Paints, Dopes, Varnishes, and Related Products

Documents

• MIL-P-5054 – PAINT; ELASTOMER, LOW GLOSS, CAMOUFLAGE, FOR AIRCRAFT TIRES AND DE-ICER BOOTS (NO S/S DOCUMENT)
• MIL-P-52024 – PAINT, FIRE RETARDANT, OLIVE DRAB (FOR WOODEN CRATES) (NO S/S DOCUMENT)
• MIL-P-52108 – PAINT, WATER EMULSION TYPE (FOR STENCILING AND OBLITERATING) (S/S BY A-A-208)
• MIL-P-52192/(an interim amendment also exists for this document number as MIL-P-52192B(I 2)) – Primer Coating, Epoxy (S/S by MIL-P-53022, or MIL-P-53030)
• MIL-P-52192/(the base document for this interim amendment is MIL-P-52192B(1) NOT 2) – PRIMER COATING, EPOXY (S/S BY MIL-P-53030)
• MIL-P-52324 – Paint, Oil, Alkyd, Exterior, White and Light Tints (S/S by TT-P-102)
• MIL-P-52905 – PAINT CAMOUFLAGE, REMOVABLE (NO S/S DOCUMENT)
• MIL-P-52977 – PRIMER COATING, ALKYD, ANTICORROSIVE, LEAD AND CHROMATE FREE (S/S BY MIL-P-53030)
• MIL-P-52995 – PRIMER COATING, SYNTHETIC, CORROSION INHIBITING, LACQUER-RESISTING, LEAD AND CHROMATE FREE (S/S BY MIL-P-53030)
• MIL-P-53032 – PRIMER COATING, WATER REDUCIBLE, EPOXY ESTER-LATEX TYPE, LEAD AND CHROMATE FREE (NO S/S DOCUMENT)
• MIL-P-62669 – PRIMER COATING, SYNTHETIC, VOC COMPLIANCE (FOR BRAKE DRUMS) (S/S BY A-A-52465)
• MIL-P-630 – PAINT, OIL, READY&MIXED
• MIL-P-6808 – PRIMER COATING, ZINC CHROMATE, PROCESS FOR APPLICATION OF (NO S/S DOCUMENT)
• MIL-P-6883 – PAINT, BLENDED-TYPE, COAL-TAR-PITCH BASE, BITUMINOUS
• MIL-P-6884 – PAINT, CAMOUFLAGE OR TEMPORARY IDENTIFICATION, SOLVENT REMOVABLE (NO S/S DOCUMENT)
• MIL-P-6889 – PRIMER; ZINC-CHROMATE, FOR AIRCRAFT USE (S/S BY MIL-P-8585)
• MIL-P-7962 – PRIMER COATING, CELLULOSE-NITRATE MODIFIED ALKYD TYPE, CORROSION-INHIBITING, FAST-DRYING (FOR SPRAY APPLICATION OVER PRETREATMENT COATING) (NO S/S DOCUMENT)
• MIL-P-85658 – PAINT, WATER DISPLACING (NO S/S DOCUMENT)
• MIL-P-8585 – PRIMER COATING, ZINC CHROMATE, LOW-MOISTURE-SENSITIVITY (USE TT-P-1757)
• MIL-P-87112 – PRIMER COATING, ELASTOMERIC, POLYSULFIDE, CORROSION INHIBITING (NO S/S DOCUMENT)
• MIL-P-8793 – PAINT, (GLOSS AND NONSPECULAR), FOR USE ON ELASTOMERIC PIGMENTED FILM (NO S/S DOCUMENT)
• MIL-P-9503 – PAINT, RUBBER, RIGID AND AIR-SUPPORTED RADOME (NO S/S DOCUMENT)
• MIL-P-9886 – PAINT, REFLECTORIZED, EQUIPMENT MARKING (S/S BY L-S-300)
• MIL-PRF-14105 – Paint, Heat-Resisting (for Steel Surfaces)
• MIL-PRF-22750 – Coating, Epoxy, High-Solids
• MIL-PRF-23236 – Coating Systems for Ship Structures
• MIL-PRF-23377 – Primer Coatings: Epoxy, High-Solids
• MIL-PRF-24596 – Coating Compounds, Nonflaming, Fire-Resistant
• MIL-PRF-24647 – Paint System, Anticorrosive and Antifouling, Ship Hull
• MIL-PRF-24667 – Coating System, Nonskid, for Roll or Spray Application
• MIL-PRF-24712 – Coatings, Powder, Thermosetting
• MIL-PRF-24763 – Enamel, Emulsion Type, for Shipboard use
• MIL-PRF-25134 – REMOVER, PAINT AND LACQUER, SOLVENT TYPE (NO S/S DOCUMENT)
• MIL-PRF-26915 – Primer Coating, for Steel Surfaces (Future Acquisitions for this Item May Refer to:  MIL-PRF-32550 and MIL-DTL-53022)
• MIL-PRF-32171 – Deck Coatings, High Durability
• MIL-PRF-32239 – Coating System, Advanced Performance, for Aerospace Applications
• MIL-PRF-32348 – Powder Coating, Camouflage Chemical Agent Resistant Systems
• MIL-PRF-32550 – Metal-Rich Primer
• MIL-PRF-32584 – Deck Covering Materials, Monolithic
• MIL-PRF-4556 – Coating Kit, Epoxy, for Interior of Steel Fuel Tanks (S/S by MIL-PRF-23236)
• MIL-PRF-46081 – COATING COMPOUND, THERMAL INSULATING (INTUMESCENT) (NO S/S DOCUMENT)
• MIL-PRF-81352 – Coatings, Aircraft Touch-Up
• MIL-PRF-83936 – Remover, Paint, Tank Type; for Aircraft Wheels, Landing Gear Components, and Other Aircraft and Support Equipment
• MIL-PRF-85285 – Topcoat, Aircraft and Support Equipment
• MIL-PRF-85322 – Coating, Elastomeric, Polyurethane, Rain-Erosion
• MIL-PRF-85582 – Primer Coatings: Epoxy, Waterborne
• MIL-PRF-87978 – Remover, Paint, Epoxy and Polyurethane Systems, Tank Type, Ambient Temperature, for Aircraft Wheels and Landing Gear Components (No S/S Document)
• MIL-R-12294 – REMOVER, PAINT AND VARNISH (ALKALI-ORGANIC-SOLVENT TYPE) USE TT-R-243
• MIL-R-15184 – RESIN, PARA-PHENYL, PHENOL-FORMALDEHYDE (USE TT-R-271)
• MIL-R-15189 – RESIN, ALKYD PHENOLIC (NO S/S DOCUMENT)
• MIL-R-18553 – REMOVER, PAINT, NONFLAMMABLE, WATER RINSABLE, USABLE IN CONTACT WITH SYNTHETIC RUBBER
• MIL-R-21935 – RESIN, PHENOLIC ( CUMYLPHENOL TYPE, OIL SOLUBLE)
• MIL-R-21972 – REMOVER, PAINT, WATER RINSABLE, TEMPORARY FLUORESCENT FINISH STRIPPING
• MIL-R-46073 – REMOVER, PAINT, ORGANIC, SOLVENT TYPE (S/S BY TT-R-251)
• MIL-R-46116 – REMOVER, PAINT, SOLVENT TYPE, FOR MULTIPLE COAT AND RESISTANT SYSTEMS (INCLUDING EPOXIES)
• MIL-R-7751 – REMOVER, PAINT AND VARNISH (SILICATE TYPE)
• MIL-R-81294 – Remover, Paint, Epoxy, Polysulfide, and Polyurethane Systems
• MIL-R-81835 – REMOVER, ORGANIC COATING, HOT TANK TYPE (S/S BY SAE-AMS-R-81835)
• MIL-R-81903 – Remover, Acid Activated, for Amine-Cured Epoxy Coating Systems
• MIL-R-8633 – REMOVER, PAINT, NONFLAMMABLE, WATER RINSABLE (USE TT-R-248A
• MIL-S-10103 – SURFACER, LACQUER (LACQUER RESISTANT) (FOR STEEL ARTICLES)
• MIL-S-10181 – SURFACER, SANDING, LACQUER TYPE
• MIL-S-10617 – STAIN: WOOD, NON-GRAIN-RAISING, SOLVENT-DYE TYPE (S/S BY TT-S-720)
• MIL-S-11123 – SEALER, SANDING, LACQUER TYPES (FOR WOOD FURNITURE).
• MIL-S-12833 – STAIN REMOVER (FOR PLASTIC TABLEWARE, CHINAWARE AND COFFEE URNS) (EXCEPT ALUMINUM)
• MIL-S-12935 – SEALER, SURFACE, FOR KNOTS (NO S/S DOCUMENT)
• MIL-S-13690 – SEALER, PLASTIC, CLEAR LIQUID
• MIL-S-13911 – SURFACER, SANDING, SYNTHETIC (ALKYD) BASE (FOR METAL AND WOOD SURFACES).
• MIL-S-13913 – STAIN, OIL TYPE, WOOD, OLIVE DRAB
• MIL-S-15191 – SILICA, DIATOMACEOUS, UNCALCINED (S/S BY ASTM-D604)
• MIL-S-15193 – STAINS
• MIL-S-18000 – SHELLAC, CUT, PIGMENTED, GREEN, FORMULA NO. 25
• MIL-S-20526 – SHELLAC, ORANGE GUM, WHITE BLEACHED, REFINED BLEACHED (USE TT-S-271)
• MIL-S-4895 – SURFACER, LIQUID, SANDING (FOR WOOD) (SUPERSEDES 14115)
• MIL-S-53018 – SEALER, WELD-THROUGH FOR OVERLAPPING SURFACES (NO S/S DOCUMENT)
• MIL-S-6892 – STRIPPER, CLEANER AND PAINT, FOR FERROUS SURFACES (USE TT-R-230)
• MIL-S-974 – SUFACER, SANDING
• MIL-STD-1262 – DEGRADATION TESTS FOR FUELS AND FUEL CONTAINER COATINGS (TEST PROCEDURE) (NO S/S DOCUMENT)
• MIL-STD-2098 – Ordnance Preparation and Application of Intumescent Sheet, Type III
• MIL-STD-240 – PAINT, ANTIFOULING, COLD-PLASTIC, FORMULA NO. 105 (S/S BY MIL-P-19451)
• MIL-STD-795 – COLOR (S/S BY FED STD 595
• MIL-T-12093 – THINNING OIL (FOR MARINE GLUE)
• MIL-T-1355 – THINNER, ENAMEL, QUICK-EVAPORATING (FOR USE IN PROCOATING RECONDITIONED SUBSISTENCE CANS)
• MIL-T-18362 – THINNER, RESIN COATING (NO S/S DOCUMENT)
• MIL-T-19544 – THINNER, ACRYLIC NITROCELLULOSE LACQUER (S/S BY TT-T-266)
• MIL-T-23397 – TAPE, PRESSURE-SENSITIVE ADHESIVE, FOR MASKING DURING PAINT STRIPPING OPERATIONS (S/S BY SAE-AMS-T-23397)
• MIL-T-6094 – THINNER: CELLULOSE NITRATE DOPE AND LACQUER (S/S BY TT-T-266)
• MIL-T-6095 – THINNER, CELLULOSE-NITRATE-DOPE, BLUSH RETARDING (NO S/S DOCUMENT)
• MIL-T-6096 – THINNER, CELLULOSE ACETATE BUTYRATE DOPE (NO S/S DOCUMENT)
• MIL-T-6097 – THINNER, CELLULOSE ACETATE BUTYRATE DOPE, BLUSH RETARDING (NO S/S DOCUMENT)
• MIL-T-6121 – TINTING PASTE, ZINC CHROMATE PRIMER
• MIL-T-704 – Treatment and Painting of Material
• MIL-V-1174 – VARNISH, SPAR, WATER RESISTING (FORMULA NO, 80), (USE TT-V-119)
• MIL-V-12954 – VARNISH, LOW BAKE, CLEAR RUBBING FOR WOOD FURNITURE (USE TT-V-86)
• MIL-V-13497 – Varnish, Impregnating, Electrical-Insulating (for Fire Control Instruments) (S/S by NEMA-RE2)
• MIL-V-13750 – Varnish, Phenol-Formaldehyde, Clear and Aluminum Pigmented
• MIL-V-13811 – Varnish, Waterproofing, Electrical, Ignition (No S/S Document)
• MIL-V-16399 – Varnish, Moistureproof
• MIL-V-173 – Varnish, Moisture-and-Fungus Resistant (for Treatment of Communications, Electronic, and Associated Equipment) User may Consult ASTM-D3955 and ASTM-D295)
• MIL-V-21064 – Varnish, Finishing, Baking for Roller Coat Application