FSC-8010: Paints, Dopes, Varnishes, and Related Products

Documents

• SAE-AMS3697 – Aerodynamic Fairing Compound -55 Deg. to +150 Deg. C (-65 Deg. to +300 Deg. F)
• SAE-AMS3721 – Tape for Organic Coatings Adhesion Testing
• SAE-AMS-C-83231 – Coatings, Polyurethane, Rain Erosion Resistant for Exterior Aircraft and Missile Plastic Parts
• SAE-AMS-C-83445 – Coating System, Polyurethane, Nonyellowing, White, Rain Erosion Resistant Thermally Reflective
• SAE-AMS-P-21600 – Paint System, Fluorescent, Removable, For Aircraft Application
• SAE-AMS-R-81835 – Remover, Organic Coating, Hot Tank Type
• SAE-AMS-STD-595 – Colors Used in Government Procurement
• SAE-AMS-T-23397 – Tapes, Pressure Sensitive Adhesive, For Masking During Paint Stripping Operations
• SAE-J1545 – Finishes, Exterior, Textiles, and Colored Trim, Instrumental Color Difference Measurement for
• SSPC-PA1 – Paint Application Specification Number 1, Shop, Field and Maintenance Painting
• SSPC-PA2 – Paint Application Specification Number 2, Measurement of Dry Paint Thickness with Magnetic Gages
• SSPC-PA3 – GUIDE TO SAFETY IN PAINT APPLICATION PAINT APPLICATION GUIDE NO. 3 (NO S/S DOCUMENT)
• SSPC-PA4 – GUIDE TO MAINTENANCE REPAINTING WITH OIL BASED OR ALKYD PAINTING SYSTEMS PAINT APPLICATION GUIDE NO. 4 (NO S/S DOCUMENT)
• SSPC-PAINT1 – RED LEAD AND RAW LINSEED OIL PRIMER (NO S/S DOCUMENT)
• SSPC-PAINT101 – Aluminum Alkyd Paint Leafing (Type I) and Non-Leafing (Type II)
• SSPC-PAINT11 – Paint Specification No. 11, Red Iron Oxide, Zinc Chromate, Raw Linseed Oil and Alkyd Primer (No S/S Document)
• SSPC-PAINT13 – RED OR BROWN ONE-COAT SHOP PAINT (NO S/S DOCUMENT)
• SSPC-PAINT15 – Paint Specification Number 15, Steel Joist Shop Paint Type I, Red Oxide Paint Type II, Asphalt Coating
• SSPC-PAINT16 – Paint Specification Number 16, Coal Tar Epoxy-Polyamide Black (or Dark Red) Paint
• SSPC-PAINT2 – RED LEAD, IRON OXIDE, RAW LINSEED OIL AND ALKYD PRIMER (NO S/S DOCUMENT)
• SSPC-PAINT20 – Paint Specification No. 20, Zinc-Rich Primers (Type I, Inorganic and Type II Organic)
• SSPC-PAINT22 – Epoxy-Polymide Paints (Primer, Intermediate, and Topcoated) Paint Specification No. 22 (No S/S Document)
• SSPC-PAINT27 – Basic Zinc Chromate-Vinyl Butyral Wash Primer Paint Specification No. 27
• SSPC-PAINT30 – Weld-Through Inorganic Zinc Primer
• SSPC-PAINT5 – Zinc Dust, Zinc Oxide, and Phenolic Varnish Paint (No S/S Document)
• SSPC-PAINT8 – Paint Specification Number 8, Aluminum Vinyl Paint”,
• SSPC-PAINT9 – Paint Specification Number 9, White (or Colored) Vinyl Paint
• SSPC-PS1.09 – Three-Coat Oil Base Zinc Oxide Painting System (without Lead or Chromate Pigment) (No S/S Document)
• SSPC-PS10.01 – Painting System Specification Number 10.01, Hot Applied Coal Tar Enamel Painting System
• SSPC-PS11.01 – Painting System Black (or Dark Red) Coal Tar Epoxy-Polyamide Painting System Specification No. 11.01
• SSPC-PS12.01 – Painting System One-Coat Zinc-Rich Painting System Specification Number 12.01
• SSPC-PS13.01 – Painting System Specification Number 13.01, Epoxy-Polyamide Painting System
• SSPC-PS14.01 – Painting System Specification No. 14.01, Steel Joist Shop Painting System (No S/S Document)
• SSPC-PS4.01 – PAINTING SYSTEM SPECIFICATION NO. 4.02, FOUR-COAT VINYL PAINTING SYSTEM (FOR FRESH WATER, CHEMICAL, & CORROSIVE ATMOSPHERES) (NO S/S DOCUMENT)
• SSPC-SP1 – Solvent Cleaning
• SSPC-SP10 – Near-White Blast Cleaning, Surface Preparation Specification No. 10
• SSPC-SP17 – Thorough Abrasive Blast Cleaning of Non-Ferrous Metals
• SSPC-SP2 – Hand Tool Cleaning
• SSPC-SP3 – Power Tool Cleaning, Surface Preparation Specification No. 3
• SSPC-SP5 – White Metal Blast Cleaning, Surface Preparation Specification No. 5
• SSPC-SP6 – Commercial Blast Cleaning, Surface Preparation Specification No.
• SSPC-SP7 – Brush-Off Blast Cleaning, Surface Preparation Specification No. 7
• SSPC-SP8 – Pickling
• SSPC-SPCOM – Surface Preparation Commentary for Steel and Concrete Substrates
• SSPC-VIS1 – Visual Standard for Abrasive Blast Cleaned Steel (Standard Reference Photographs) Guide to SSPC-VIS1
• SSPC-VIS2 – Standard Method of Evaluating Degree of Rusting on Painted Steel Surfaces
• TT-A-468 – ALUMINUM-PIGMENT, POWDER AND PASTE, FOR PAINT
• TT-A-566 – Antimony Oxide, Dry (Paint Pigment) (S/S by TT-P-325)
• TT-B-1325 – Beads (Glass Spheres) Retro-Reflective
• TT-B-486 – BLUE-LEAD, BASIC-SULPHATE, DRY AND PASTE-IN-OIL
• TT-B-600 – Bone-Black, Dry (Paint-Pigment) (S/S by TT-P-330)
• TT-C-001224 – Coating System, Epoxy, Glaze for Interior Surfaces (No S/S Document)
• TT-C-001225 – COATING SYSTEM, INORGANIC, GLAZE, FOR INTERIOR SURFACES
• TT-C-001226 – Coating System, Polyester, Glaze, for Interior Surfaces (No S/S Document)
• TT-C-001227 – Coating System, Polyurethane, Glaze, for Interior Surfaces (No S/S Document)
• TT-C-001951 – COATING, CLEAR (SATIN FINISH), POLYURETHANE, LATEX, FOR INTERIOR USE (NO S/S DOCUMENT)
• TT-C-001979 – COATING SYSTEM, GLAZE, HIGH PERFORMANCE, (WATER REDUCIBLE), FOR INTERIOR SURFACES
• TT-C-00290/(the base document for this interim revision is TT-C-290( 3)) – Chrome-Yellow and Chrome-Orange, Dry (Paint-Pigments) (No S/S Document)
• TT-C-00542/(the base document for this interim revision is TT-C-542E NOT 1) – COATING, POLYURETHANE, OIL-FREE, MOISTURE CURING (NO S/S DOCUMENT)
• TT-C-1060 – COATING COMPOUND, REFLECTIVE (NO S/S DOCUMENT)
• TT-C-1162 – COATING, POLYURETHANE ALKYD MODIFIED, SATIN FINISH (FOR INTERIOR AND EXTERIOR USE)
• TT-C-1558 – COATING, ELASTOMERIC, TWO-COMPONENT, ULTRA-LOW GLOSS (FOR INTERIOR USE) (NO S/S DOCUMENT)
• TT-C-1659 – COATINGS. EPOXY EMULSION, TWO-COMPONENT GLOSS AND SEMIGLOSS (FOR INTERIOR USE)
• TT-C-1685 – COATING SYSTEM-DECORATIVE AND PROTECTIVE, SEAMLESS (NO S/S DOCUMENT)
• TT-C-1883 – COATING, CLEAR, FIRE RETARDANT, TWO COMPONENT POLYURETHHNE, THERMAL INSULATING (INTUMESCENT)
• TT-C-2114 – COATING, OBLITERATING (NO S/S DOCUMENT)
• TT-C-235 – CHROME-GREEN, PURE, DRY (PAINT-PIGMENT) (S/S BY TT-P-345)
• TT-C-290/(an interim revision also exists for this document number as TT-C-00290A NOT 1) – CHROME-YELLOW AND CHROME-ORANGE, DRY (PAINT-PIGMENT) SUPERSEDED BY TT-P-346
• TT-C-306 – Chromium-Oxide-Green, Dry (Paint-Pigment) (S/S by TT-P-347)
• TT-C-492 – Coatings, Anti-Sweat
• TT-C-499 – COATING COMPOUND, CHEMICAL RESISTANT, CLEAR (S/S BY TT-C-542)
• TT-C-530 – COATING COMPOUND, RUST INHIBITIVE, FISH OIL BASE (NO S/S DOCUMENT)
• TT-C-535 – COATING, EPOXY, TWO COMPONENT, FOR INTERIOR USE ON METAL, WOOD, WALLBOARD, PAINTED SURFACES CONCRETE AND MASONRY (S/S BY A-A-3126)
• TT-C-540 – COATING, POLYURETHANE CLEAR, LINSEED-OIL, MODIFIED
• TT-C-542/(an interim revision also exists for this document number as TT-C-00542F NOT 1) – COATING, POLYURETHANE, OIL-FREE, MOISTURE-CURING (NO S/S DOCUMENT)
• TT-C-545 – COATING, POLYESTER EPOXY (TWO COMPONENT) HIGH BUILD, GLOSS AND SEMIGLOSS, WHITE AND TINTS (FOR INTERIOR USE)
• TT-C-550 – COATING SYSTEM, GLAZE, HIGH PERFORMANCE (SOLVENT BASE) FOR INTERIOR SURFACES (NO S/S DOCUMENT)
• TT-C-555 – COATING, TEXTURED (FOR INTERIOR AND EXTERIOR MASONRY SURFACES) (NO S/S DOCUMENT)
• TT-C-595 – COLORS; (FOR) READY-MIXED PAINTS (S/S BY FED-STD-595)
• TT-C-610 – Copper-Phthalocyanine-Blue, Dry (Paint-Pigment) (S/S by TT-P-355)
• TT-C-80 – CADMIUM RED (CADMIUM LITHOPONE) DRY PAINT PIGMENT (S/S BY TT&P&341)
• TT-C-800 – CURING COMPOUND, CONCRETE FOR NEW EXISTING SURFACES (SEE ASTM C309)
• TT-C-83 – CADMIUM-YELLOW (CADMIUM LITHOPONE), DRY (PAINT-PIGMENT). SUPERSEDED BY TT-P-342.
• TT-C-96 – CALCIMINE (COLD AND HOT WATER TYPES)
• TT-D-643 – DRIER, PAINT, NAPHTHENATE, LIQUID, CONCENTRATED (SEE ASTM D600)
• TT-D-651 – DRIER, PAINT, LIQUID
• TT-E-001384 – ENAMEL, GLOSS, SYNTHETIC (FOR METAL EQUIPMENT) (S/S BY TT-E-2784 AND A-A-2787)
• TT-E-001793 – ENAMEL, SEMI-GLOSS, FOR METAL AND WOOD FURNITURE (S/S BY TT-E-2784 & A-A-2787)
• TT-E-002124 – ENAMEL (VINYL-ALKYD, EXTERIOR) (NO S/S DOCUMENT)
• TT-E-1126 – ENAMEL, LOW LUSTRE THIXOTROPIC, (FOR INTERIOR USE) (NO S/S DOCUMENT)
• TT-E-1593 – ENAMEL, SILICONE ALKYD COPOLYMER, GLOSS (FOR EXTERIOR AND INTERIOR USE) (NO S/S DOCUMENT)
• TT-E-2784 – ENAMEL (ACRYLIC-EMULSION, EXTERIOR) (S/S BY A-A-3183)
• TT-E-485 – ENAMEL, SEMIGLOSS, RUST-INHIBITING (NO S/S DOCUMENT)
• TT-E-487 – ENAMEL, FLOOR AND DECK (NO S/S DOCUMENT)
• TT-E-488 – ENAMEL (IN PRESSURIZED DISPENSERS) (S/S BY A-A-665)
• TT-E-489 – Enamel, Alkyd, Gloss, Low VOC Content (See Notice 2 for Replacement Information)
• TT-E-490 – Enamel, Silicone Alkyd Copolymer, Semigloss (for Exterior and Interior Use (S/S by MIL-PRF-24635)
• TT-E-491 – ENAMEL, GLOSS, SYNTHETIC (FOR METAL AND WOOD FURNITURE) (S/S BY TT-E-2784)
• TT-E-496 – ENAMEL, HEAT-RESISTING (400 DEG. F.), BLACK (S/S BY A-A-3054)
• TT-E-505 – ENAMEL (ODORLESS, ALKYD, INTERIOR, HIGH GLOSS) (S/S BY TT-E-506)