FSC-5998: Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware

Documents

• A-A-55563 – Holder, Electrical Card, Metal Card Guide, General Requirements for
• A-A-55563/1 – Holder, Electrical Card, Metal Card Guide, Open Ended, with Flared Entry, with 2 Offset (Side) Mounting Holes
• A-A-55563/10 – Holder, Electrical Card, Metal Card Guide, Closed Ended, without Flared Entry, with 3 Mounting Holes
• A-A-55563/11 – Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, with Flared Entry, with 3 Offset (Side) Mounting Holes
• A-A-55563/12 – Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, without Flared Entry, with 3 Offset (Side) Mounting Holes
• A-A-55563/13 – Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, with Flared Entry, with 2 Offset (Side) Mounting Holes, with Controlled Inside Bend Radius
• A-A-55563/14 – Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, without Flared Entry, with 2 Offset (Side) Mounting Holes with Controlled Inside Bend Radius
• A-A-55563/15 – Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, with Flared Entry, with 3 Mounting Holes, with Controlled Inside Bend Radius
• A-A-55563/16 – Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, without Flared Entry, with 3 Mounting Holes, with Controlled Inside Bend Radius
• A-A-55563/17 – Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, without Flared Entry, with 2 Mounting Holes
• A-A-55563/18 – Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, without Flared Entry, with 3 Mounting Holes
• A-A-55563/19 – Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, without Flared Entry, with 2 Mounting Holes, Short Length
• A-A-55563/2 – Holder, Electrical Card, Metal Card Guide, Open Ended, without Flared Entry, with 2 Offset (Side) Mounting Holes
• A-A-55563/20 – Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, with Flared Entry, with 2 Mounting Holes, Short Length
• A-A-55563/21 – Holder, Electrical Card, Metal Card Guide, Low Profile, Closed Ended, without Flared Entry, with Three Mounting Holes, for Versamodule Eurocard Applications
• A-A-55563/22 – Holder, Electrical Card, Metal Card Guide, Low Profile, Closed Ended, with Flared Entry, with Three Mounting Holes, for Versamodule Eurocard Applications
• A-A-55563/23 – Holder, Electrical Card, Metal Card Guide, Medium Profile, Center Mount, with Flared Entry, with 2 Mounting Holes
• A-A-55563/24 – Holder, Electrical Card, Metal Card Guide, Medium Profile, Center Mount, with Flared Entry, with 3 Mounting Holes
• A-A-55563/25 – Holder, Electrical Card, Metal Card Guide, Open Ended, with 2 Mounting Holes, for use with Heat Sinks
• A-A-55563/26 – Holder, Electrical Card, Metal Card Guide, Open Ended, with 3 Mounting Holes, for use with Heat Sinks
• A-A-55563/27 – Holder, Electrical Card, Metal Card Guide, Closed Ended, with 2 Mounting Holes, for use with Heat Sinks
• A-A-55563/28 – Holder, Electrical Card, Metal Card Guide, Closed Ended, with 3 Mounting Holes, for use with Heat Sinks
• A-A-55563/29 – Holder, Electrical Card, Metal Card Guide, Narrow Profile, Center Mount, with Flared Entry, with 2 Mounting Holes
• A-A-55563/3 – Holder, Electrical Card, Metal Card Guide, Closed Ended, with Flared Entry, with 2 Offset (Side) Mounting Holes
• A-A-55563/30 – Holder, Electrical Card, Metal Card Guide, Center Mounting, with Multiple Mounting Holes, Unsupported, for Chassis or Supported Mounting Applications
• A-A-55563/31 – Holder, Electrical Card, Metal Card Guide, Offset Mounting, with Multiple Mounting Holes, Unsupported, for Chassis or Sheet Metal Applications, with Rigid (Right Hand Side) Wall Support
• A-A-55563/32 – Holder, Electrical Card, Metal Card Guide, Offset Mounting, with Multiple Mounting Holes, Unsupported, for Chassis or Sheet Metal Applications, with Rigid (Left Hand Side) Wall Support
• A-A-55563/4 – Holder, Electrical Card, Metal Card Guide, Closed Ended, Without Flared Entry, With 2 Offset (Side) Mounting Holes
• A-A-55563/5 – Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, with Flared Entry, with 2 Offset (Side) Mounting Holes
• A-A-55563/6 – Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, without Flared Entry, with 2 Offset (Side) Mounting Holes
• A-A-55563/7 – Holder, Electrical Card, Metal Card Guide, Open Ended, with Flared Entry, with 3 Mounting Holes
• A-A-55563/8 – Holder, Electrical Card, Metal Card Guide, Open Ended, without Flared Entry, with 3 Mounting Holes
• A-A-55563/9 – Holder, Electrical Card, Metal Card Guide, Closed Ended, with Flared Entry, with 3 Mounting Holes
• A-A-59590 – Holder, Electrical Card, Wedge Retainers, 3 Piece, for Cold Plate Applications, General Requirements for
• A-A-59590/1 – Holders, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .225 X .260 Inch Body Size, Wedge Body Mounting, with Lever Action Locking
• A-A-59590/10 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .220 X .220 Inch Body Size, Wedge Mounting Body, with Visual Indication and Screw Retention
• A-A-59590/11 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .240 X .180 Inch Body Size, Wedge Mounting Body
• A-A-59590/12 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .240 X .180 Inch Body Size, Wedge Mounting Body, with Screw Retention
• A-A-59590/13 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .375 X .375 Inch Body Size, Wedge Mounting Body
• A-A-59590/14 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .375 X .375 Inch Body Size, Wedge Mounting Body, with Visual Lock Indication
• A-A-59590/15 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .375 X .375 Inch Body Size, Wedge Mounting Body, with Screw Retention
• A-A-59590/16 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .375 X .375 Inch Body Size, Wedge Mounting Body with Visual Lock Indication and Screw Retention
• A-A-59590/17 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .260 X .260 Inch Body Size, Wedge Mounting Body
• A-A-59590/18 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .260 X .260 Inch Body Size, Wedge Mounting Body, with Visual Lock Indication
• A-A-59590/19 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .260 X .260 Inch Body Size, Wedge Mounting Body, with Screw Retention
• A-A-59590/2 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .225 X .260 Inch Body Size, Wedge Mounting Body, with Ejection Action
• A-A-59590/20 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .260 X .260 Inch Body Size, Wedge Mounting Body, with Visual Lock Indication and Screw Retention
• A-A-59590/21 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .500 X .450 Inch Body Size, Wedge Mounting Body
• A-A-59590/22 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive .500 X .450 Inch Body Size, Wedge Mounting Body, with Visual Lock Indication
• A-A-59590/23 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .500 X .450 Inch Body Size, Wedge Mounting Body, with Screw Retention
• A-A-59590/24 – Holders, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .500 X .450 Inch Body Size, Wedge Mounting Body, with Visual Lock Indication and Screw Retention
• A-A-59590/25 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .225 X .260 Inch Body Size, Wedge Mounting Body, with Ejection Action and Visual Lock Indication
• A-A-59590/26 – Holders, Electrical Card, Wedge Retainers, 3 Piece, .250 X .260 Inch Body Size, Shaft Mounting Body, Screw Actuated
• A-A-59590/27 – Holders, Electrical Card, Wedge Retainers, 3 Piece, .250 X .260 Inch Body Size, Shaft Mounting Body, with Visual Lock Indication, Screw Actuated
• A-A-59590/3 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .225 X .260 Inch Body Size, Wedge Mounting Body, with Visual Lock Indication
• A-A-59590/4 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .225 X .260 Inch Body Size, Wedge Mounting Body
• A-A-59590/5 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .225 X .260 Inch Body Size, Wedge Mounting Body, with Screw Retention
• A-A-59590/6 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive .225 X .260 Inch Body Size, Wedge Mounting Body, with Visual Lock and Screw Retention
• A-A-59590/7 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .220 X .220 Inch Body Size, Wedge Mounting Body
• A-A-59590/8 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .220 X .220 Inch Body Size, Wedge Mounting Body, with Visual Lock Indication
• A-A-59590/9 – Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .220 X .220 Inch Body Size, Wedge Mounting Body, with Screw Retention
• A-A-59789 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, General Requirements for
• A-A-59789/1 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 X .260 Inch Body Size, Wedge Mounting Body, with Two Mounting Holes, Screw Actuation and Retention
• A-A-59789/10 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 X .225 Inch Body Size, Shaft Mounting Body, Screw Actuated, with Visual Lock Indication
• A-A-59789/11 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .375 X .375 Inch Body Size, Wedge Mounting Body, with Two Mounting Holes, Screw Actuated
• A-A-59789/12 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .375 X .375 Inch Body Size, Wedge Mounting Body, with Two Mounting Holes and Visual Lock Indication, Screw Actuated
• A-A-59789/13 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .375 X .375 Inch Body Size, Wedge Mounting Body, with Two Mounting Holes and Screw Retention, Screw Actuated
• A-A-59789/14 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .375 X .375 Inch Body Size, Wedge Mounting Body, with Two Mounting Holes, Visual Lock Indication, and Screw Retention, Screw Actuated
• A-A-59789/15 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .365 X .375 Inch (9.27 x 9.53 mm) Body Size, Shaft Mounting Body, Screw Actuated
• A-A-59789/16 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .365 X .375 Inch (9.27 X 9.53 mm) Body Size, Shaft Mounting Body, with Visual Lock Indication, Screw Actuated
• A-A-59789/17 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .250 X .290 Inch (6.35 x 7.37 mm) Body Size, Shaft Mounting Body, with Captive Rear Wedge, Screw Actuated
• A-A-59789/18 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .250 X .290 Inch (6.35 x 7.37 mm) Body Size, Shaft Mounting Body, with Captive Rear Wedge and Visual Lock Indication, Screw Actuated
• A-A-59789/19 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .250 X .270 Inch (6.35 X 6.86 mm) Body Size, Shaft Mounting Body, with Captive Rear Wedge, Screw Actuated
• A-A-59789/2 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 X .260 Inch Body Size, Wedge Mounting Body, with Two Mounting Holes and Visual Lock Indication, with Screw Actuation and Retention
• A-A-59789/20 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .250 X .270 Inch (6.35 X 6.86 mm) Body Size, Shaft Mounting Body, with Captive Rear Wedge and Visual Lock Indication, Screw Actuated
• A-A-59789/21 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 X .260 Inch Body Size, Wedge Mounting Body, with Two or no Mounting Holes, Screw Activated
• A-A-59789/22 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 X .260 Inch Body Size, Wedge Mounting Body, with Two or no Mounting Holes and Visual Lock Indication, Screw Actuated
• A-A-59789/23 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 X .225 Inch Body Size, Wedge Mounting Body, with Two, Three, or Four Mounting Holes, Screw Actuated, 7.0 Inch Through 8.5 Inch Assembly Length
• A-A-59789/24 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 X .225 Inch Body Size, Wedge Mounting Body, with Two, Three, or Four Mounting Holes and Visual Lock Indication, Screw Actuated, 7.0 Inch Through 8.5 Inch Assembly Length
• A-A-59789/25 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 X .225 Inch Body Size, Shaft Mounting Body, Screw Actuated, with Captive Screw
• A-A-59789/26 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 X .225 Inch Body Size, Shaft Mounting Body, Screw Actuated, with Captive Screw and Visual Lock Indication
• A-A-59789/5 – Holders, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, Lever Actuated, Shaft Mounting Body, with Visual Lock Indication
• A-A-59789/6 – Holders, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, Lever Actuated, Shaft Mounting Body, with Lever Extraction and Visual Lock Indication
• A-A-59789/7 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .195 X .250 Inch Body Size, Shaft Mounting Body, Screw Actuated
• A-A-59789/8 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .195 X .250 Inch Body Size, Shaft Mounting Body, Screw Actuated, with Visual Lock Indication
• A-A-59789/9 – Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 X .225 Inch Body Size, Shaft Mounting Body, Screw Actuated
• A-A-59812 – Holder, Electrical Card, Metal Card Guide, Multiple Piece, General Requirements for
• A-A-59812/1 – Holder, Electrical Card, Metal Card Guide, Multiple Piece, Center Mounting, With 2,3, or 4 Mounting Holes and Support Housing for Chassis or Cold Plate Mounting Applications
• A-A-59812/2 – Holder, Electrical Card, Metal Card Guide, Center Mounting, with Multiple Mounting Holes and Heat Transfer Housing, for Chassis or Cold Plate Mounting Applications
• A-A-59812/3 – Holder, Electrical Card, Metal Card Guide, Multiple Piece, with Heat Transfer Housing, Flange Mounting with Two, Three, or Four Mounting Holes for Chassis or Cold Plate Mounting Applications
• A-A-59812/4 – Holder, Electrical Card, Metal Card Guide, Multiple Piece, Flange Mounting with Two, Three, or Four Mounting Holes for Chassis or Cold Plate Mounting Applications
• A-A-59832 – Extractor, Electrical Card, Metal, General Requirements for
• A-A-59832/2 – Extractor, Electrical Card, Metal, Non Locking, Single Action, for "U" Channel Actuating Surfaces, for .032, .063, .094, and .125 Inch Thick Circuit Card Assemblies
• A-A-59832/3 – Extractor, Electrical Card, Metal, Locking, Single Action, for "U" Channel Actuating Surfaces, for .063, .094, and .125 Inch Thick Circuit Card Assemblies
• A-A-59832/5 – Extractor, Electrical Card, Metal, Non-Locking, Singe-Sided Actuation, Narrow Profile, Angled Actuating Handle, for .032, .063, .094, .125, and .156 Inch Thick Circuit Card Assemblies
• A-A-59832/6 – Extractor, Electrical Card, Metal, Non-Locking, Single-Sided Actuation, Narrow Profile, Straight Actuating Handle for .032, .063, .094, .125, and .156 Inch Thick Circuit Card Assemblies
• A-A-59832/7 – Extractor, Electrical Card, Metal, Non-Locking, Single-Sided Actuation, Narrow Profile, Angled Actuating Handle, with Release Tab, for .032, .063, .094, .125, and .156 Inch Thick Circuit Card Assemblies
• A-A-59832/8 – Extractor, Electrical Card, Metal, Non-Locking, Single-Sided Actuation, Narrow Profile, Straight Actuating Handle, with Release Tab, for .032, .063, .094, .125 and .156 Inch Thick Circuit Card Assemblies
• A-A-59950 – Holder, Electrical Card, Wedge Retainers, 7 Body, for Cold Plate Applications, General Requirements for
• A-A-59950/1 – Holder, Electrical Card, Wedge Retainers, 7 Piece, for Cold Plate Applications, .225 X .225 Inch (5.72 X 5.72 mm) Body Size, Screw Actuated Shaft