Society of Automotive Engineers (SAE)

Documents

• SAE-AMS2424 – Plating, Nickel Low-Stressed Deposit
• SAE-AMS2425 – Gold Plating - for Thermal Control
• SAE-AMS2430 – Shot Peening
• SAE-AMS2433 – Nickel-Thallium-Boron or Nickel-Boron Electroless Desposition, Plating
• SAE-AMS2435 – Tungsten Carbide-Cobalt Coatings Detonation Process
• SAE-AMS2436 – Coating, Aluminum Oxide Detonation Deposition
• SAE-AMS2438 – Plating, Chromium Thin, Hard, Dense Deposit
• SAE-AMS2451/5 – Plating, Brush, Chromium Hard Deposit, Trivalent
• SAE-AMS2451/9 – Plating, Brush, Zinc-Nickel Low Hydrogen Embrittlement
• SAE-AMS2454 – Plating, Electroless Nickel, Codeposited with Polytetrafluoroethylene (PTFE)
• SAE-AMS2460 – Plating, Chromium
• SAE-AMS2465 – Molybdenum and Molybdenum Alloys Pack Cementation Method, Disilicide Diffusion Coating of
• SAE-AMS2469 – Aluminum and Aluminum Alloys Processing and Performance Requirements, Hard Anodiic Coating Treatment of
• SAE-AMS2470 – Aluminum Alloys Chromic Acid Process, Anodic Treatment of
• SAE-AMS2471 – Aluminum Alloys Sulfuric Acid Process, Undyed Coating, Anodic Treatment of
• SAE-AMS2472 – Aluminum Alloys Sulfuric Acid Process, Dyed Coating, Anodic Treatment of
• SAE-AMS2475 – Magnesium Alloys, Protective Treatments
• SAE-AMS2481 – Phosphate Treatment Antichafing
• SAE-AMS2485 – Coating, Black Oxide
• SAE-AMS2486 – Conversion Coating of Titanium Alloys Fluoride-Phosphate Type
• SAE-AMS2488 – Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or Higher
• SAE-AMS2491 – Polytetrafluoroethylene, Preparation for Bonding, Surface Treatment of
• SAE-AMS2510 – Engine Gray Finishing Low Baking
• SAE-AMS2515 – Polytetrafluoroethylene (PTFE) Resin Coating Low Build, 370 Degrees - 400 Degrees C (698 Degrees - 752 Degrees F) Fusion
• SAE-AMS2516 – Polytetrafluoroethylene (PTFE) Resin Coating High Build, 370 Degrees - 400 Degrees C (698 Degrees - 752 Degrees F) Fusion
• SAE-AMS2518 – Thread Compound, Anti-Seize, Graphite-Pertolatum
• SAE-AMS2530 – Tungsten Disulfide Coating, Thin Lubricating Film, Binder-Less Impingement Applied
• SAE-AMS2535 – Microcircuits Coating, Vapor Deposited Poly-Monochloro-Para-Xylylene for
• SAE-AMS2550 – Treatment of Sheet Metal Parts Corrosion Resistant Steel
• SAE-AMS2552 – CLEANING, PACKAGING, & ASSEMBLY OF CRITICAL SYSTEM COMPONENTS CLEAN ROOM PROCEDURE, 500 MICRON MAX PARTICLE SIZE - 15 JAN 63
• SAE-AMS2553 – CLEANING, PACKAGING, & ASSEMBLY OF CRITICAL SYSTEM COMPONENTS CLEAN AREA PROCEDURE, 2500 MICRON MAX PARTICLE SIZE (NO S/S DOCUMENT)
• SAE-AMS2590 – Rotary Flap Peening of Metal Parts
• SAE-AMS2601 – PRESSURE TESTING, GASEOUS MEDIA 10 PSI (S/S BY SAE-AMS2610)
• SAE-AMS2602 – PRESSURE TESTING 25 PSI (S/S BY SAE-AMS2610)
• SAE-AMS2604 – PRESSURE TESTING, GASEOUS MEDIA 40 PSI (S/S BY SAE-AMS2610)
• SAE-AMS2605 – PRESSURE TESTING 55 PSI (S/S BE SAE-AMS2610)
• SAE-AMS2606 – PRESSURE TESTING 70 PSI (S/S BY SAE-AMS2610)
• SAE-AMS2607 – PRESSURE TESTING 100 PSI (S/S BY SAE-AMS2610)
• SAE-AMS2610 – Pressure Testing, Gaseous Media Pressure as Specified
• SAE-AMS2616 – PRESSURE TESTING, HYDRAULIC 200 PSI (NO S/S DOCUMENT)
• SAE-AMS2620 – PRESSURE TESTING, HYDRAULIC 1000 PSI (NO S/S DOCUMENT)
• SAE-AMS2625 – PRESSURE TESTING, HYDRAULIC 2500 PSI (NO S/S DOCUMENT)
• SAE-AMS2629 – Fluid, Jet Reference
• SAE-AMS2630 – Inspection, Ultrasonic, Product Over 0.5 Inch (12.7 MM) Thick
• SAE-AMS2631 – Titanium and Titanium Alloy Bar and Billet, Ultrasonic Inspection
• SAE-AMS2632 – Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 MM) and Under in Cross-Sectional Thickness
• SAE-AMS2633 – Cylinders, Steel Tubular, Centrifugally-Cast, Corrosion-Resistant, Ultrasonic Inspection
• SAE-AMS2634 – Metal Tubing, Thin Wall, Ultrasonic Inspection
• SAE-AMS2640 – MAGNETIC PARTICLE INSPECTION (NO S/S DOCUMENT)
• SAE-AMS2643 – Titanium Alloys, Chemical Etch Inspection Procedure, Structural Examination of
• SAE-AMS2644 – Inspection Material, Penetrant
• SAE-AMS2645 – FLUORESCENT PENETRANT INSPECTION (S/S BY ASTM-E1417)
• SAE-AMS2658 – Aluminum Alloy Parts, Wrought, Hardness and Conductivity Inspection of
• SAE-AMS2672 – Aluminum, Brazing Torch or Furnace
• SAE-AMS2680 – WELDING, ELECTRON-BEAM, FOR FATIGUE CRITICAL APPLICATIONS
• SAE-AMS2681 – ELECTRON-BEAM WELDING
• SAE-AMS2700 – Steels, Passivation of Corrosion Resistant
• SAE-AMS2750 – Pyrometry
• SAE-AMS2755 – Salt Bath, Molten, Nitriding (No S/S Document)
• SAE-AMS2759 – Heat Treatment of Steel Parts, General Requirements
• SAE-AMS2759/3 – Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts
• SAE-AMS2759/6 – Gas Nitriding and Heat Treatment of Low-Alloy Steel Parts
• SAE-AMS2759/7 – Carburizing and Heat Treatment of Carburizing Grade Steel Parts
• SAE-AMS2762 – Steel, Carburizing, Carbon and Low-Alloy Parts
• SAE-AMS2768 – Heat Treatment of Magnesium Alloy Castings
• SAE-AMS2770 – Heat Treatment of Wrought Aluminum Alloy Parts
• SAE-AMS2800 – Identification Finished Parts
• SAE-AMS2801 – Heat Treatment Of Titanium Alloy Parts
• SAE-AMS2804 – Identification Castings
• SAE-AMS2806 – IDENTIFICATION, BARS, WIRE, MECHANICAL TUBING, AND EXTRUSIONS CARBON AND ALLOY STEELS AND CORROSION AND HEAT RESISTANT STEELS AND ALLOYS
• SAE-AMS2807 – IDENTIFICATION CARBON AND LOW-ALLOY STEELS, CORROSION AND HEAT RESISTANT STEELS AND ALLOYS SHEET, STRIP, PLATE, AND AIRCRAFT TUBING
• SAE-AMS2808 – Identification Forgings
• SAE-AMS2809 – Identification, Titanium and Titanium Alloy Wrought Products
• SAE-AMS2810 – Identification and Packaging Elastomeric Products
• SAE-AMS2813 – Packaging and Marking of Packages of Welding Wire Standard Method (No S/S Document)
• SAE-AMS2814 – Wire, Welding, Premium Quality, Packaging and Marking of Packages
• SAE-AMS2815 – WIRE, WELDING, IDENTIFICATION LINE CODE SYSTEM (NO S/S DOCUMENT)
• SAE-AMS2816 – Identification Welding Wire, Tab Marking Method (No S/S Document)
• SAE-AMS2817 – Packaging and Identification of Molded Elastomeric Seals and Sealing Components
• SAE-AMS2825 – Material Safety Data Sheets (See Notice of Withdrawal for Replacement Information)
• SAE-AMS3021 – Fluid, Reference For Testing Di-ester (Polyol) Resistant Material
• SAE-AMS3025 – Polyalkylene Glycol Heat Treat Quenchant
• SAE-AMS3040 – Magnetic Particles, Nonfluorescent Dry Method
• SAE-AMS3041 – Magnetic Particles, Nonfluorescent Wet Method, Oil Vehicle, Ready-to-use
• SAE-AMS3042 – Magnetic Particles, Nonfluorescent Wet Method, Dry Powder
• SAE-AMS3043 – Magnetic Particles, Nonfluorescent Wet Method, Oil Vehicle, Aerosol Packaged
• SAE-AMS3044 – Magnetic Particles, Fluorescent Wet Method, Dry Powder
• SAE-AMS3045 – Magnetic Particles, Fluorescent Wet Method, Oil, Vehicle, Ready-to-Use
• SAE-AMS3046 – Magnetic Particles, Fluorescent Wet Method, Oil Vehicle, Aerosol Packaged
• SAE-AMS3054 – Oil, Lubricating, Low Temperature for -55 Deg. C (-67 Deg. F) Service
• SAE-AMS3055 – Lubricant, Instrument Bearing, Petroleum Base, Viscosity 15
• SAE-AMS3056 – Lubricant, Instrument Bearing, Petroleum Base, Viscosity 35
• SAE-AMS3100 – Adhesion Promoter for Polysulfide Sealing Compounds
• SAE-AMS3106 – PRIMER, ADHESIVE, CORROSION INHIBITING, MINUS 55 DEG. TO PLUS 950C (MINUS 67 DEG. TO 20 DEG. F) 1 MAR 74 (S/S BY AMS 3107-83 & AMS 3107/1-83)
• SAE-AMS3107 – Primer, Adhesive, Corrosion-inhibiting For High Durability Structural Adhesive Bonding
• SAE-AMS3107/1 – Primer, Adhesive, Corrosion-inhibiting High Durability Epoxy, -55 Deg. To Plus 95 Deg. C (-65 Deg To Plus 200 Deg. F)
• SAE-AMS3107/2 – Primer, Adhesive, Corrosion Inhibiting High Durability Epoxy, -55 Deg. To Plus 120 Deg C (-65 Deg To Plus 250 Deg. F)
• SAE-AMS3107/3 – Primer, Adhesive, Corrosion Inhibiting High Durability Epoxy, -55 Deg. to Plus 175 Deg C (-67 Deg. to Plus 347 Deg. F)
• SAE-AMS3107/4 – Primer, Adhesive, Corrosion-Inhibiting High Durability Epoxy, -55 Deg, to Plus 215 Deg. C (-67 Deg. to Plus 419 Deg. F)
• SAE-AMS3135 – Coating Material, Silicone Resin 205 Deg. C (400 Deg. F) Cure