Society of Automotive Engineers (SAE)

Documents

• SAE-AMS7255 – Rings, Sealing, Tetrafluoroethylene/Propylene Rubber (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 70 - 80 (No S/S Document)
• SAE-AMS7256 – Rings, Sealing, Tetrafluoroethylene/Propylene Rubber (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 85 - 95 (No S/S Document)
• SAE-AMS7257 – RINGS, SEALING, PERFLUOROCARBON (FFKM) RUBBER HIGH TEMPERATURE FLUID RESISTANT 70 - 80
• SAE-AMS7258 – Rings, Sealing, Butadiene-Acrylonitrile (NBR) Rubber Fuel Resistant, Low Shrinkage 65 - 75
• SAE-AMS7259 – Fluorocarbon (FKM) Rubber High Temperature/Fluid Resistant Low Compression Set/ 85 to 95 Hardness For Seals In Fuel Systems and Specific Engine Oil Systems
• SAE-AMS7260 – Rings, Butadiene-Acrylonitrile (NBR) Rubber, Molded Fuel and Low Temperature Resistant 70-80
• SAE-AMS7261 – RINGS, SEALING, PHOSPHONITRILIC (FZ) FLUOROELASTOMER HIGH-TEMPERATURE-FLUID RESISTANT (NO S/S DOCUMENT)
• SAE-AMS7261/1 – RINGS, SEALING, PHOSPHONITRILIC (FZ) FLUOROELASTOMER HIGH-TEMPERATURE-FLUID RESISTANT 65-75 (NO S/S DOCUMENT)
• SAE-AMS7261/2 – RINGS, SEALING, PHOSPHONITRILIC (FZ) FLUOROELASTOMER HIGH-TEMPERATURE-FLUID RESISTANT 75-85 (NO S/S DOCUMENT)
• SAE-AMS7261/3 – RINGS, SEALING, PHOSPHONITRILIC (FZ) FLUOROELASTOMER HIGH-TEMPERATURE-FLUID RESISTANT 85-95 (NO S/S DOCUMENT)
• SAE-AMS7262 – RINGS, SEALING, ETHYLENE PROPYLENE (EPM) RUBBER PHOSPHATE ESTER HYDRAULIC FLUID RESISTANT 58 - 95 (NO S/S DOCUMENT)
• SAE-AMS7264 – Rings, Sealing, Silicone Rubber High Temperature Resistant, Low Compression Set 65 - 75 (No S/S Document)
• SAE-AMS7265 – RINGS, SEALING, ETHYLENE PROPYLENE (EPM) RUBBER PHOSPHATE ESTER HYDRAULIC FLUID RESISTANT 75 - 85 (NO S/S DOCUMENT)
• SAE-AMS7266 – Rings, Sealing, Fluorosilicone Rubber General Purpose, High Temperature, Fuel and Oil Resistant 65 - 75 (No S/S Document)
• SAE-AMS7267 – Rings, Sealing, Silicone (VSI) Rubber Heat-Resistant, Low Compression Set 70 - 80
• SAE-AMS7268 – Rings, Sealing, Silicone Rubber Low Compression Set, Non-Oil Resistant 65-75
• SAE-AMS7269 – Rings, Sealing, Silicone (PVMQ) Rubber Low Outgassing, Space and Vacuum Service 45 - 55 (No S/S Document)
• SAE-AMS7270 – RINGS, SEALING, BUTADIENE-ACRYLONITRILE (NBR) RUBBER FUEL RESISTANT 65 - 75
• SAE-AMS7271 – Rubber: Acrylonitrile-Butadiene Rubber (NBR) Fuel and Low Temperature Resistant 60 - 70 Type “A” Hardness For Seals in Fuel Systems
• SAE-AMS7272 – Rings, Sealing, Butadiene-Acrylonitrile (NBR) Rubber Synthetic Lubricant Resistant 65 - 75
• SAE-AMS7273 – Rings, Sealing, Fluorosilicone (FVMQ) Rubber High Temperature Fuel and Oil Resistant 70 - 80
• SAE-AMS7274 – RINGS, SEALING, BUTADIENE-ACRYLONITRILE (NBR) RUBBER, OIL RESISTANT 65 - 75
• SAE-AMS7276 – Rubber: Fluorocarbon (FKM)  High Temperature-Fluid Resistant Low Compression Set/70 to 80 Type A Hardness for Seals in Fuel Systems and Specific Engine Oil Systems
• SAE-AMS7284 – RINGS, SEALING, PHOSPHONITRILIC FLUOROELASTOMER (FZ) AVIATION FUEL-RESISTANT (NO S/S DOCUMENT)
• SAE-AMS7284/1 – RINGS, SEALING, PHOSPHONITRILIC FLUOROELASTOMER (FZ) AVIATION FUEL RESISTANT 65 - 75 SHORE A (NO S/S DOCUMENT)
• SAE-AMS7284/2 – RINGS, SEALING, PHOSPHONITRILIC FLUOROELASTOMER (FZ) AVIATION FUEL RESISTANT 75 - 85 SHORE A (NO S/S DOCUMENT)
• SAE-AMS7292 – Labels, Aluminum Foil, Etched, Anodized, and Dyed (No S/S Document)
• SAE-AMS7301 – Steel, Highly-Stressed Springs 0.95CR - 0.2V (0.48 - 0.53C) (SAE 6150) Case Hardened
• SAE-AMS7320 – Rings, Sealing, Cast Leaded-Tin Bronze 80CU - 16SN - 5PB AS Cast (No S/S Document)
• SAE-AMS7322 – Rings, Sealing. Cast Tin Bronze 80CU - 19SN AS Cast  (No S/S Document)
• SAE-AMS7325 – RING, SEALING, TUBULAR METAL, CORROSION AND HEAT RESISTANT STEEL (NO S/S DOCUMENT)
• SAE-AMS7379 – Rubber: Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -40 Degrees F (-40 Degrees C) For Elastomeric Seals in Aircraft Engine Oil, Fuel and Hydraulics Systems
• SAE-AMS7440 – Balls, Steel, Low-Chromium, High-Carbon Hardened and Tempered
• SAE-AMS7445 – Balls, Steel, Corrosion-Resistant 17Cr Annealed
• SAE-AMS7488 – Rings, Flash Welded Aluminum and Aluminum Alloys
• SAE-AMS7490 – Rings, Flash Welded Corrosion and Heat Resistant Austenitic Steels, Austenitic-Type Iron, Nickel, or Cobalt Alloys, or Precipitation Hardenable Alloys
• SAE-AMS7493 – Rings, Flash Welded Ferritic and Martensitic Corrosion-Resistant Steels resistant STEELS",
• SAE-AMS7496 – Rings, Flash Welded Carbon and Low-Alloy Steels
• SAE-AMS7498 – Rings, Flash Welded Titanium and Titanium Alloys
• SAE-AMS7510 – MAGNETS, RARE-EARTH/COBALT, PERMANENT POWDER-METALLURGY PRODUCT (NO S/S DOCUMENT)
• SAE-AMS7510/1 – MAGNETS, RARE-EARTH/COBALT, PERMANENT SAMARIUM-COBALT, 33/67 - 15 (119) 250 (NO S/S DOCUMENT)
• SAE-AMS7510/2 – MAGNETS, RARE-EARTH/COBALT, PERMANENT SAMARIUM-COBALT, 33/67 - 18 (143) 250 (NO S/S DOCUMENT)
• SAE-AMS7701 – Nickel-Iron Alloy, Magnetic, Sheet and Strip Annealed (See Notice of Withdrawal for Replacement Information)
• SAE-AMS7702 – Nickel-Iron Alloy, Magnetic, Sheet and Strip Cold Rolled, Half Hard Temper (See Notice of Withdrawal for Replacement Information)
• SAE-AMS7705 – Bars and Forgings, Nickel-Iron Magnetic Alloy (See Notice of Withdrawal for Replacement Information)
• SAE-AMS7706 – IRON, COMMERCIALLY PURE HOT ROLLED, ANNEALED (NO S/S DOCUMENT)
• SAE-AMS7707 – Iron, Commercially Pure Hot Rolled, Unannealed
• SAE-AMS7711 – STEEL SHEET AND STRIP, FLAT-ROLLED, ELECTRICAL, NON-ORIENTED 2.65(SI + AL) TYPE 47S188 OR TYPE 64S213, SEMI-PROCESSED (NO S/S DOCUMENT)
• SAE-AMS7712 – STEEL SHEET AND STRIP, FLAT-ROLLED, ELECTRICAL, NON-ORIENTED 3.0(SI + AL) TYPE 47S178 OR TYPE 64S194, SEMI-PROCESSED (NO S/S DOCUMENT)
• SAE-AMS7715 – STEEL, FLAT ROLLED ELECTRICAL 4.25SI AISI TYPE M-15, SEMIPROCESSED (NO S/S DOCUMENT)
• SAE-AMS7717 – Nickel-Iron Alloy, Magnetic, Sheet and Strip, 50NI - 50FE Annealed, Forming Grade
• SAE-AMS7718 – Nickel-Iron Alloy, Magnetic, Bars, Rods, Tubing, and Forgings 50NI – 50FE
• SAE-AMS7719 – Nickel-Iron Alloy, Magnetic, Sheet and Strip 50Ni - 50Fe Stamping Quality, Half-Hard Temper
• SAE-AMS7720 – LEAD ALLOY CASTINGS, 6.5SB - 0.5SN (NO S/S DOCUMENT)
• SAE-AMS7721 – Lead Alloy Sheet and Extrusions 93PB - 6.5SB - 0.50SN as Fabricated
• SAE-AMS7725 – Tungsten Alloy Shapes, Sintered, High Density
• SAE-AMS7727 – Iron-Nickel-Cobalt Alloy, Bars and Forgings 53FE - 29NI - 17CO Low Expansion, Glass Sealing (No S/S Document)
• SAE-AMS7728 – Iron-Nickel-Cobalt Alloy, Sheet, Strip, and Plate 53Fe - 29Ni - 17Co Low Expansion Glass Sealing, Annealed (No S/S Document)
• SAE-AMS7730 – Depleted Uranium Castings (No S/S Document)
• SAE-AMS7731 – Gold Wire and Ribbon 99.97AU Annealed
• SAE-AMS7732 – Steel Wire, Copper Clad 99FE - 0.32MN Annealed
• SAE-AMS7791 – ALLOY SHEET AND STRIP, MAGNETIC, 50NI - 50FE - STAMPING QUALITY (NO S/S DOCUMENT)
• SAE-AMS7903 – Bars, Rods, Tubing, and Shapes, Beryllium, 4.25BEO - 94BE, High Micro-Yield Strength (No S/S Document)
• SAE-AMS7904 – Beryllium Bars, Rods, Tubing, and Shapes High Ductility Grade
• SAE-AMS7905 – Bars, Rods, Tubing, and Shapes, Beryllium, Optical Grade (No S/S Document)
• SAE-AMS7906 – Beryllium Bars, Rods, Tubing, and Shapes Standard Grade
• SAE-AMS7907 – Beryllium Bars, Rods, Tubing, and Shapes Instrument Grade
• SAE-AMS7913 – Aluminum-Beryllium Alloy, Sheet and Plate 38A1-62BE
• SAE-AMS-A-21180 – Aluminum-Alloy Castings, High Strength
• SAE-AMS-A-22771 – Aluminum Alloy Forgings, Heat Treated
• SAE-AMS-A-25463 – Adhesive, Film Form, Metallic Structural Sandwich Construction
• SAE-AMS-A-81596 – Aluminum Foil For Sandwich Construction
• SAE-AMS-A-8576 – Adhesive, Acrylic Base, for Acrylic Plastic
• SAE-AMS-B-20148 – Brazing Sheet, Aluminum Alloy
• SAE-AMS-B-8964 – Beryllium Sheet and Plate, General Requirements for (S/S by SAE-AMS7902)
• SAE-AMS-C-19853 – Carbon Removing Compound (for use in Agitated Tank)
• SAE-AMS-C-22542 – Cleaning Compound, High Pressure Cleaner, Liquid
• SAE-AMS-C-22587 – Cartridges, Grease, 14 Ounce (For Cartridge-Type Grease Gun)
• SAE-AMS-C-26074 – Electroless Nickel Coatings
• SAE-AMS-C-27725 – COATING, CORROSION PREVENTATIVE, POLYURETHANE FOR AIRCRAFT INTEGRAL FUEL TANKS FOR USE TO 250 DEG. F. (121 DEG. C.)
• SAE-AMS-C-29602 – Cleaning Compounds, for Parts Washers and Spray Cabinets
• SAE-AMS-C-6183 – Cork And Rubber Composition Sheet; For Aromatic Fuel And Oil Resistant Gaskets
• SAE-AMS-C-7438 – Core Material, Aluminum, for Sandwich Construction
• SAE-AMS-C-8073 – Material, Core, Plastic Honeycomb, Laminated Glass Fabric Base, for Aircraft Structural and Electronic Applications
• SAE-AMS-C-81562 – Coatings, Cadmium, Tin-Cadmium and Zinc (Mechanically Deposited)
• SAE-AMS-C-81769 – Metals, Chemical Milling of
• SAE-AMS-C-81986 – Material, Core, Plastic Honeycomb, Nylon Paper Base; For Aircraft Structural Applications
• SAE-AMS-C-83231 – Coatings, Polyurethane, Rain Erosion Resistant for Exterior Aircraft and Missile Plastic Parts
• SAE-AMS-C-83445 – Coating System, Polyurethane, Nonyellowing, White, Rain Erosion Resistant Thermally Reflective
• SAE-AMS-C-8837 – Coating, Cadmium (Vacuum Deposited)
• SAE-AMS-C-9084 – Cloth, Glass, Finished, For Resin Laminates
• SAE-AMS-DTL-22499 – Shim, Stock, Laminated
• SAE-AMS-DTL-22499/1 – Shim Stock, Laminated, Aluminum Alloy
• SAE-AMS-DTL-22499/2 – Shim Stock, Laminated, Brass
• SAE-AMS-DTL-22499/3 – Shim Stock, Laminated, Cres
• SAE-AMS-DTL-22499/4 – Shim Stock, Laminated, Carbon Steel (No S/S Document)
• SAE-AMS-DTL-23053 – Insulation Sleeving, Electrical, Heat Shrinkable, General Specification For (S/S by SAE AS23053)
• SAE-AMS-DTL-23053/1 – Insulation Sleeving, Electrical, Heat Shrinkable, Crosslinked Chlorinated Polyolefin, Flexible (S/S by SAE AS23053/1)
• SAE-AMS-DTL-23053/10 – Insulation Sleeving, Electrical, Heat Shrinkable, Silicone Rubber, Flexible (S/S by SAE-AS23053/10)
• SAE-AMS-DTL-23053/11 – Insulation Sleeving, Electrical, Heat Shrinkable, Fluorinated Ethylene Propylene, Non-Crosslinked (S/S by SAE-AS23053/11)