MS Drawing

Documents

• MS39191 – TEE, PIPE TO TUBE, MALE PIPE END ON RUN, FOR AIR LINES -SPHERICAL SLEEVE (S/S BY SAE-J246)
• MS39192 – Tee, Tube, One Male and One Female Pipe End-for Air Lines
• MS39193 – TEE, PIPE TO TUBE, FEMALE PIPE END ON RWN, FOR AIRLINES, SPHERICAL SLEEVE (NO S/S DOCUMENT)
• MS39194 – Elbow, Tube, Female Pipe End, Right Side - for Air Lines
• MS39195 – Elbow, Pipe to Tube-for Air Lines, Female Pipe End, Left Side
• MS39196 – NUT TUBE COUPLING, FORAIR LINES-SPHERICAL SLEEVE (S/S BY SAE-J246)
• MS39197 – SLEEVE, COMPRESSION, TUBE FITTING, FOR AIR LINES-SPHERICAL SLEEVE (S/S BY SAE-J246)
• MS39198 – TEES, TUBE SAFETY SLEEVE COMPRESSION TYPE
• MS39199 – Nipple, Tube-Safety Sleeve Compression Type, Bulkhead Mounting
• MS39200 – ELBOWS, TUBE - SAFETY SLEEVE COMPRESSION TYPE, 90 DEGREE, FEMALE PIPE END (USER MAY CONSULT MS51813 AS A POSSIBLE REPLACEMENT)
• MS39201 – Nipple, Tube-Safety Sleeve Compression Type
• MS39202 – Elbows, Pipe to Tube - Safety Sleeve Compression Type, 90 Degree, Male Pipe End
• MS39203 – ADAPTERS, STRAIGHT, PIPE TO TUBE SAFETY SLEEVE COMPRESSION TYPE, FEMALE PIPE END
• MS39204 – ELBOWS, PIPE TO TUBE - SAFETY SLEEVE COMPRESSION TYPE, 45 DEGREE, MALE PIPE END (USERS MAY CONSULT MS51817 AS A POSSIBLE REPLACEMENT)
• MS39205 – TEES, PIPE TO TUBE-SAFETY SLEEVE COMPRESSION TYPE, MALE PIPE SIDE
• MS39206 – Adapters, Straight, Pipe to Tube - Safety Sleeve Compression Type, Male Pipe End
• MS39207 – Elbows, Tube - Safety Sleeve Compression Type, 90 Degree
• MS39208 – TEES, PIPE TO TUBE SAFETY SLEEVE COMPRESSION TYPE, FEMALE PIPE SIDE
• MS39209 – TEES, PIPE TO TUBE SAFETY SLEEVE COMPRESSION TYPE FEMALE PIPE END
• MS39210 – Nuts, Tube Coupling - Safety Sleeve Compression Type
• MS39211 – TEES, PIPE TO TUBE SAFETY SLEEVE COMPRESSION TYPE, MALE PIPE END
• MS39212 – Sleeves, Compression, Tube-Hose Fitting-Safety Sleeve Type
• MS39213 – RANGE-TIME-SPEED PLOTTING SCALE 200 AND 1,000 YARDS PER INCH (S/S BY MIL-D-3898/4)
• MS39214 – RANGE-TIME-SPEED PLOTTING SCALE 500 AND 2,000 YARDS PER INCH (S/S BY MIL-D-3898/5)
• MS39215 – RANGE-TIME-SPEED PLOTTING SCALE 25,000:1 AND 50,000:1 YARDS RATIO (S/S BY MIL-D-3898/6)
• MS39216 – CAP, COMPRESSED GAS CYLINDER (USE MIL-C-17376/1)
• MS39217 – FLANGE ATTACHMENT COMPRESSED GAS CYLINDER. SPUD (USE MIL-C-17376/2)
• MS39218 – FLANGE ATTACHMENT, COMPRESSED GAS CYLINDER, NECK RING (USE MIL-C-17376/3)
• MS39219 – CYLINDER, COMPRESSED GAS, ICC SPECIFICATION 4AA&480, AMMONIA
• MS39220 – ADAPTER, COMPRESSED GAS CYLINDER VALVE CONNECTIONS, BRASS, CLASS 200-510, ACETYLENE, 300 PSI SERVICE PRESSURE (USE MIL-A-16288/13)
• MS39221 – ADAPTER, COMPRESSED GAS CYLINDER VALVE CONNECTION, BRASS, CLASS 510-200, ACETYLENE, 300 PSI SERVICE PRESSURE (USE MIL-A-16288/14)
• MS39222 – ADAPTER, COMPRESSED GAS CYLINDER VALVE CONNECTIONS, BRASS, CLASS 200-520, ACETYLENE, 300 PSI SERVICE PRESSURE (USE MIL-A-16288/15)
• MS39223 – ADAPTER, COMPRESSED GAS CYLINDER VALVE CONNECTIONS, BRASS, CLASS 520-510, ACETYLENE 300 PSI SERVICE PRESSURE (USE MIL-A-16288/21)
• MS39224 – CYLINDER, COMPRESSED GAS, DOT SPECIFICATION 3AA (S/S BY RR-C-901/1)
• MS39225 – CYLINDER, COMPRESSED GAS CARBON DIOXIDE, DOT SPECIFICATION 3AA 2015 (S/S BY RR-C-901/2)
• MS39226 – CYLINDER, COMPRESSED GAS, DOT SPECIFICATION 3AA2015, MEDICAL GASES (S/S BY RR-C-901/3
• MS39227 – CYLINDER, COMPRESSED GAS, DOT SPECIFICATION 8 OR 8AL FOR ACETYLENE (S/S BY MIL-C-3701 NOW MIL-DTL-3701)
• MS39228 – CYLINDER, COMPRESSED GAS, ICC SPECIFICATION 4BA (S/S BY RR-C-910/1)
• MS39229 – CYLINDER, COMPRESSED GAS, DOT SPECIFICATION 4BA240, 4BW240, & 4E240, FOR LIQUIFIED PETROLEUM (S/S BY RR-C-910/2)
• MS39230 – Elbow, Pipe-Street, 90 Degrees (150 and 300 Lbs)
• MS39231 – Elbow, Pipe Street, 45 Degrees., (150 and 300 Pounds)
• MS39232 – Reducer, Pipe Right Hand Thread (150 and 300 Pounds)
• MS39233 – Coupling, Pipe Straight (150 and 300 Pounds)
• MS39234 – CYLINDER, COMPRESSED GAS, CHLORINE, DOT SPECIFICATION 3A480 OR 3AA480 (USE MIL-C-11732/1)
• MS39235 – TACHOMETER, ELECTRICAL
• MS39236 – TRANSMITTER, ELECTRICAL, FLANGE MOUNTED
• MS39237 – TRANSMITTER, ELECTRICAL, SCREW MOUNTED
• MS39238 – CUTTING EDGE, SCRAPER BOWL, EARTH MOVING, 18 CUBIC YARD
• MS39239 – PULLEY, GROOVE, FRACTIONAL HORSEPOWER (NO S/S DOCUMENT)
• MS39240 – BELTS, V: FRACTIONAL HORSEPOWER (2L OR 6R CROSS-SECTIONAL DESIGNATION) (S/S BY A-A-52490)
• MS39241 – BELT, V: FRACTIONAL HORSEPOWER (3L AND 9R CROSS-SECTIONAL DESIGNATION) (S/S BY A-A-52490)
• MS39242 – BELT, V: FRACTIONAL HORSEPOWER (4L AND 13R CROSS-SECTIONAL DESIGNATION) (S/S BY A-A-52490)
• MS39243 – BELT, V: FRACTIONAL HORSEPOWER (5L OR 16R CROSS-SECTIONAL DESIGNATION) (S/S BY A-A-52490)
• MS39244 – DRILL ROD, ROCK DRILL FOR DRIFTER DRILLS (S/S BY MS 39329)
• MS39245 – BIT, STAR, ROCK DRILL FOR DRIFTER DRILLS (S/S BY MS 39330)
• MS39246 – LAMPHOLDER, PANEL-MOUNT BAYONET CANDELABRA, NONINDEXING, SINGLE CONTACT, WITH WEATHER PROOF CAP (NO S/S DOCUMENT)
• MS39247 – AIR CLEANER, INTAKE, DRY TYPE, FOR INTERNAL COMBUSTION ENGINES (CLASS I AND CLASS II) (NO S/S DOCUMENT)
• MS39248 – REGULATOR, ALTERNATOR, 28-VOLT, 35-AMPERES
• MS39249 – ALTERNATOR, 28-VOLT, 35-AMPERE
• MS39250 – REGULATOR, ALTERNATOR, 28-VOLT, 35 AMPERES, FOR USE WITH SELF-LOAD LIMITING ALTERNATORS
• MS39251 – ALTERNATOR, 28-VOLT, 35-AMPERE, DOUBLE, FLANGE MOUNTING
• MS39252 – REGULATOR, ALTERNATOR, 28-VOLT, 35-AMPERE
• MS39253 – ALTERNATOR, 28 VOLT, 35 AMPERE, SINGLE MOUNTING FLANGE
• MS39254 – Cylinder, Engine Starting (Engine Cold-Starting Aid
• MS39255 – BELTS, V: INDUSTRIAL (MULTIPLE DRIVE) "A" AND "13C" CROSS SECTION (S/S BY A-A-52160)
• MS39256 – BELT, V: INDUSTRIAL (MULTIPLE DRIVE) "B" AND "16C" CROSS SECTION (S/S BY A-A-52160)
• MS39257 – BELT, "V": INDUSTRIAL (MULTIPLE DRIVE) "C" AND "22C" CROSS SECTION (S/S BY A-A-52160)
• MS39258 – BELTS, V: INDUSTRIAL (MULTIPLE DRIVE) "D" AND "32C" CROSS SECTION (S/S BY A-A-52160)
• MS39259 – BELTS, V: INDUSTRIAL (MULTIPLE DRIVE) "E" CROSS SECTION (NO S/S DOCUMENT)
• MS39260 – PULLEY, INDUSTRIAL (MULTIPLE DRIVE) STANDARD DEEP AND NARROW GROOVE (NO S/S DOCUMENT)
• MS39261 – HOSE, RUBBER, HYDRAULIC, PRESSURE TYPE, NOMINAL SIZES AND MAXIMUM WORKING PRESSURES (FOR ENGINEER EQUIPMENT)
• MS39262 – HOSE, RUBBER, HYDRAULIC, PRESSURE TYPE, SINGLE WIRE BRAID REINFORCEMENT (S/S BY MIL-H-52471/4 NOW MIL-DTL-52471/4)
• MS39263 – HOSE, RUBBER, HYDRAULIC, PRESSURE TYPE, DOUBLE WIRE BRAID REINFORCEMENT (S/S BY MIL-H-52471/5 NOW MIL-DTL-52471/5)
• MS39264 – HOSE, RUBBER, HYDRAULIC, PRESSURE TYPE, FOUR SPIRAL WRAP REINFORCEMENT (S/S BY MIL-H-52471/6)
• MS39265 – HOSE RUBBER, HYDRAULIC, PRESSURE TYPE, SIX SPIRAL WRAP REINFORCEMENT (FOR ENGINEER EQUIPMENT) (NO S/S DOCUMENT)
• MS39266 – HOSE ASSEMBLY, RUBBER: HYDRAULIC, PRESSURE TYPE, LENGTH MEASUREMENT (NO S/S DOCUMENT)
• MS39267 – HOSE, RUBBER: HYDRAULIC, PRESSURE TYPE MINIMUM BEND RADIUS (SEE MIL-DTL-52471 AND MIL-DTL-52525)
• MS39268 – TIE, RAILROAD, WOOD, CROSS AND SWITCH
• MS39269 – MAGNETO, IGNITION, ASSEMBLY-REPLACEMENT TYPE, FLANGE-MOUNTED, 2-CYLINDER, FOR INDUSTRIAL ENGINES
• MS39270 – MAGNETO, IGNITION, ASSEMBLY-REPLACEMENT TYPE, 4-CYLINDER, FLANGE MOUNTED, FOR INDUSTRIAL ENGINES
• MS39271 – MAGNETO, IGNITION ASSEMBLY, REPLACEMENT TYPE, FLANGE MOUNTED, 6 CYLINDER, FOR INDUSTRIAL ENGINES
• MS39272 – ADAPTER, COMPRESSED GAS CYLINDER VALVE CONNECTIONS, BRASS, HELIUM, CLASS 580-350, 2,500 PSI SERVICE PRESSURE (NO S/S DOCUMENT)
• MS39273 – ADAPTER, COMPRESSED GAS CYLINDER VALVE CONNECTIONS, BRASS, HELIUM, CLASS 350-580, 2,500 PSI SERVICE PRESSURE (NO S/S DOCUMENT)
• MS39274 – ADAPTER, COMPRESSED GAS CYLINDER VALVE CONNECTIONS, BRASS, ACETYLENE, CLASS 510-520, 300 PSI SERVICE PRESSURE (USE MIL-A-16288/18)
• MS39275 – ADAPTER, COMPRESSED GAS CYLINDER VALVE CONNECTIONS, BRASS, ACETYLENE, CLASS 510-520, 300 PSI SERVICE PRESSURE (USE MIL-A-16288/20)
• MS39276 – ADAPTER, COMPRESSED GAS CYLINDER VALVE CONNECTIONS, BRASS, NITROGEN, CLASS 580-550, 2,500 PSI SERVICE PRESSURE
• MS39277 – BELTS, "V": INDUSTRIAL (NARROW TYPE), "3V" AND "9N" SECTIONAL DESIGNATION (S/S BY A-A-52422)
• MS39278 – BELTS, "V": INDUSTRIAL (NARROW TYPE), "5V" AND "15N" SECTIONAL DESIGNATION (S/S BY A-A-52422)
• MS39279 – BELTS, "V": INDUSTRIAL (NARROW TYPE), "8V" AND "25N" SECTIONAL DESIGNATION (S/S BY A-A-52422)
• MS39280 – PUMP, FUEL SYSTEM, AUXILIARY, ELECTRICAL, 24 VOLTS D.C., RATED CAPACITY-45 GPH
• MS39281 – BELTING, RUBBER COVERED, CONVEYOR, DITCHING MACHINE, DISCHARGE WITH CLEATS AND GUIDE STRIP, FULLY MOLDED (NO S/S DOCUMENT)
• MS39282 – COUPLING, HOSE, FIELD ATTACHABLE (REUSEABLE), HYDRAULIC, PRESSURE TYPE, CLAMP-ON, 4 BOLT SPLIT FLANGE, STRAIGHT, SINGLE WIRE BRAID HOSE (S/S BY MIL-F-52525/19)
• MS39283 – COUPLING, HOSE, FIELD ATTACHABLE (REUSEABLE), HYDRAULIC, PRESSURE TYPE, CLAMP-ON, 4 BOLT SPLIT FLANGE, 45 DEG. BENT TUBE, FOR RI SINGLE WIRE BRAID HOSE (S/S BY MIL-F-52525/20)
• MS39284 – COUPLING, HOSE, FIELD ATTACHABLE (REUSEABLE), HYDRAULIC, PRESSURE TYPE, CLAMP-ON, 4 BOLT SPLIT FLANGE, 90 DEG. BENT TUBE, SHORT DROP, SINGLE WIRE BRAID HOSE (S/S BY MIL-F-52525/21)
• MS39285 – COUPLING, HOSE, FIELD ATTACHABLE (REUSEABLE), HYDRAULIC, PRESSURE TYPE, CLAMP-ON, 4 BOLT SPLIT FLANGE, 90 DEG, BENT TUBE, LONG DROP, SINGLE WIRE BRAID HOSE (S/S BY MIL-F-52525/22)
• MS39286 – COUPLING, HOSE, FIELD ATTACHABLE (REUSEABLE), HYDRAULIC, PRESSURE TYPE, CLAMP-ON, 4 BOLT SPLIT FLANGE, STRAIGHT, FOR R10 4 SPIRAL WRAP HOSE (S/S BY MIL-F-52525/23 NOW MIL-DTL-52525/23)
• MS39287 – COUPLING, HOSE, FIELD ATTACHABLE (REUSEABLE), HYDRAULIC, PRESSURE TYPE, CLAMP-ON, 4 BOLT SPLIT FLANGE, 45 DEG. BENT TUBE, 4 SPIRAL WRAP HOSE (S/S BY MIL-F-52525/24 NOW MIL-DTL-52525/24)
• MS39288 – COUPLING, HOSE, FIELD ATTACHABLE (REUSEABLE), HYDRAULIC, PRESSURE TYPE, CLAMP-ON, 4 BOLT SPLIT FLANGE, 90 DEG. BENT TUBE, SHORT DROP, 4 SPIRAL WRAP HOSE (S/S BY MIL-F-52525/25 NOW MIL-DTL-52525/25)
• MS39289 – COUPLING, HOSE, FIELD ATTACHABLE (REUSEABLE) HYDRAULIC, PRESSURE TYPE, CLAMP ON, 4 BOLT SPLIT FLANGE, 90 DEG, BENT TUBE, LONG DROP, FOR R-10 4 SPIRAL WRAP HOSE (S/S BY MIL-F-52525/26)
• MS39290 – COUPLING, HOSE, FIELD ATTACHABLE (REFUSEABLE), HYDRAULIC, SCREW ON, PRESSURE TYPE, FEMALE, SWIVEL, 37 DEG. FLARE, STRAIGHT, DOUBLE WIRE BRAID HOSE (S/S BY MIL-F-52525/1 NOW MIL-DTL-52525/1)