Federal Specification– Page 54

TT-L-50/(an interim amendment also exists for this document number as TT-L-50G(I3) NOT 1) – LACQUER, NITROCELLULOSE, ACRYLIC AND ACRYLIC BUTYRATE, AEROSAL (IN PRESSURIZED DISPENSERS) (NO S/S DOCUMENT)

TT-L-50/(the base document for this interim amendment is TT-L-50G(2) NOT 1) – LACQUER, NITROCELLULOSE, ACRYLIC AND ACRYLIC-BUTYRATE, AEROSOL (IN PRESSURIZED DISPENSERS) (NO S/S DOCUMENT)

TT-L-54 – LACQUER: SPRAYING, ACID-RESISTANT, (FOR ALUMINUM SURFACES AROUND STORAGE BATTERIES) (S/S BY A-A-1452)

TT-L-57 – LACQUER, RUBBING, CLEAR, (FOR WOOD FURNITURE) (S/S BY A-A-2850)

TT-L-58 – LACQUER, SPRAYING, CLEAR AND PIGMENTED, FOR INTERIOR USE (S/S BY A-A-3003)

TT-L-70 – Lampblack, Dry (Paint-Pigment) (S/S by TT-P-350)

TT-M-00931 – MIXING AND FINISHING OIL, CLEAR

TT-M-251 – Metallic-Brown, Dry (Paint-Pigment) (S/S by TT-P-405)

TT-M-261 – Methyl Ethyl Ketone, Technical (S/S by ASTM-D740)

TT-M-268 – Methyl Isobutyl Ketone (For Use in Organic Coatings) (S/S by ASTM-D1153)

TT-M-381 – Mineral-Red (Iron-Oxide), Natural, Dry (Paint-Pigments) (No S/S Document)

TT-M-90 – Magnesium-Silicate, Dry (Paint-Pigment) (S/S by TT-P-403)

TT-N-350 – Nitrocellulose, Technical (for use in Organic Coatings)

TT-N-95 – Naphtha, Aliphatic

TT-N-97 – Naphtha; Aromatic

TT-O-121 – OCHER, YELLOW, DRY (PAINT-PIGMENT)

TT-O-356 – OIL, FLATTING AND MIXING (FOR THINNING WHITE-LEAD-PASTE AND SIMILIAR PASTE PAINTS)

TT-O-364 – OIL, LINSEED, BOILED (FOR USE IN ORGANIC COATINGS)

TT-O-367 – OIL, LINSEED, HEAT-POLYMERIZED (BODIED), FOR PAINT, VARNISH, AND ENAMEL (S/S BY TT-L-201)

TT-O-369 – OIL, LINSEED, RAW (FOR USE IN ORGANIC COATINGS)

TT-O-371 – OIL, LINSEED-REPLACEMENT (FOR USE IN ORGANIC COATINGS)

TT-O-388 – OIL, SOYBEAN, REFINED (FOR USE IN ORGANIC COATINGS) (S/S BY TT-S-600)

TT-P-00100 – PAINT, TREE MARKING

TT-P-001385 – PRIMER COATING, SYNTHETIC, GRAY (FOR METAL EQUIPMENT) (S/S BY A-A-2786 AND TT-P-664)

TT-P-0016/(the base document for this interim revision is TT-P-16B) – PADS, STAMP (USE TT-I-600)

TT-P-00160 – PAINT, WATER, POWDER (NAVY FORMULA NO. 106NA) (USE TT-P-0035)

TT-P-001932 – PAINT, LATEX BASE, INTERIOR, WHITE, TINTS AND BLACK, FIRE RETARDANT

TT-P-001957 – PAINT, LATEX (BACTERIOSTATIC AND FUNGISTATIC) (NO S/S DOCUMENT)

TT-P-001975 – PRIMER COATING, LATEX-BASE, EXTERIOR (FOR METALS) (S/S BY SSPC-23)

TT-P-001984 – PRIMER COATING, LATEX BASE, EXTERIOR, UNDERCOAT FOR WOOD, WHITE AND TINTS (NO S/S DOCUMENT)

TT-P-002119 – PAINT, LATEX BASE, HIGH TRAFFIC AREA, FLAT AND EGGSHELL FINISH (LOW LUSTRE), (FOR INTERIOR USE) (S/S BY A-A-2246)

TT-P-0033 – PAINT, LATEX-BASE, EXTERIOR (FOR MASONRY SURFACES) (USE TT-P-19)

TT-P-0035 – PRINTED, CEMENTITIOUS,OWDER, WHITE AND COLORS (FOR INTERIOR AND EXTERIOR USE) S/S BY A-A-1555

TT-P-0039 – PAINT, (OIL EMULSION BASE) READY-MIXED, EXTERIOR WHITE AND LIGHT TINTS, FOR WOOD AND MASONRY SURFACES, USE TT-P-96

TT-P-0053/(the base document for this interim revision is TT-P-53C( 1)) – PAINT, READY MIXED, OUTSIDE MEDIUM YELLOW

TT-P-00791/(the base document for this interim revision is TT-P-791A(3) NOT 2) – PUTTY, LINSEED-OIL TYPE, (FOR WOOD-SASH-GLAZING) (S/S BY A-A-378)

TT-P-0099 – PAINT, STYRENE BUTADIENE EMULSION, EXTERIOR

TT-P-102 – PAINT, OIL, (ALKYD MODIFIED, EXTERIOR, LOW VOC) (S/S BY A-A-3067)

TT-P-103 – PAINT (TITANIUM-ZINC AND OIL, EXTERIOR, FUME-RESISTANT, READY-MIXED, WHITE) (S/S BY TT-P-102)

TT-P-104 – Paint (White Lead and Oil, Exterior, Ready Mixed, White and Light Tints) (Use TT-P-105)

TT-P-1046 – PRIMER COATING, ZINC DUST, CHLORINATED RUBBER, (FOR STEEL AND GALVANIZED SURFACES) (S/S BY TT-P-641)

TT-P-105 – PAINT, OIL, CHALK RESISTANT, LEAD FREE, EXTERIOR, READY MIXED, WHITE AND TINTS (S/S BY TT-P-102)

TT-P-110 – PAINT, TRAFFIC BLACK (NONREFLECTORIZED) (S/S BY TT-P-1952 OR A-A-2886)

TT-P-115 – PAINT, TRAFFIC, HIGHWAY, WHITE AND YELLOW (NO S/S DOCUMENT)

TT-P-117 – Paint, Antifouling, Shipbottom (S/S by MIL-P-19451)

TT-P-118 – PAINT, ANTICORROSIVE, SHIPBOTTOM (USE MIL-P-19453)

TT-P-1181 – PAINT, STYRENE-ACRYLATE SOLVENT TYPE, TINTS AND DEEP TONES (FOR EXTERIOR MASONRY) (S/S BY TT-P-95)

TT-P-141 – PAINT, VARNISH, LACQUER, AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING (S/S BY FED STD NO. 141)

TT-P-1411 – PAINT, COPOLYMER-RESIN, CEMENTITIOUS (FOR WATERPROOFING CONCRETE AND MASONRY WALLS) (NO S/S DOCUMENT)

TT-P-143 – PAINT, VARNISH, LACQUER, AND RELATED MATERIALS, PACKAGING, PACKING, AND MARKING OF (S/S BY PPP-P-1892)

TT-P-1510 – PAINT, LATEX, EXTERIOR, FOR WOOD SURFACES, WHITE AND TINTS (NO S/S DOCUMENT)

TT-P-1511 – PAINT, LATEX (GLOSS AND SEMIGLOSS, TINTS AND WHITE) (FOR INTERIOR USE) (S/S BY TT-P-29)

TT-P-1536 – PLUMBING FIXTURE SETTING COMPOUND (S/S BY A-A-3110)

TT-P-1561 – PAINT, ZINC-ALUMINUM, RUST-INHIBITIVE (FOR RUSTY-GALVANIZED AND OTHER METAL SUFACES) (NO S/S DOCUMENT)

TT-P-1565 – PAINT, BOOT-TOPPING BLACK (NO S/S DOCUMENT)

TT-P-16/(an interim revision also exists for this document number as TT-P-0016C) – Pads, Stamp (S/S by TT-I-600)

TT-P-1728 – PAINT, LATEX-BASE, INTERIOR, FLAT, DEEP TONE (NO S/S DOCUMENT)

TT-P-1757 – Primer Coating, ALKYD Base, One Component

TT-P-18 – PAINT, ALKYD RESIN-EMULSION, EXTERIOR, PASTE, TINTS AND WHITE

TT-P-19 – PAINT, LATEX (ACRYLIC EMULSION, EXTERIOR WOOD AND MASONRY) (S/S BY A-A-3183)

TT-P-1952 – Paint, Traffic and Airfield Marking, Waterborne

TT-P-20 – PAINT, BLUE-LEAD-BASE, BASIC-SULFATE, LINSEED-OIL, READYMIXED

TT-P-21 – PAINT, CEMENT WATER, POWDER, WHITE AND TINTS (FOR INTERIOR AND EXTERIOR USE)

TT-P-2118 – Paint, Tree Marking

TT-P-22 – PAINT, COLD-WATER, EXTERIOR, POWDER (WITH MIXING LIQUID)

TT-P-23 – PAINT, COLD-WATER, INTERIOR, LIGHT-TINTS AND WHITE

TT-P-24 – PAINT, OIL (EXTERIOR CONCRETE AND MASONRY) (S/S BY TT-E-2784)

Federal Specification

Documents