Federal Specification– Page 51

SS-C-635 – CRAYON ASSORTMENT, DRAWING, COLORED

SS-C-726 – CRUSHED-STONE, CRUSHED-GRAVEL, AND CRUSHED-SLAG, (FOR) BINDER-COURSE, SHEET-ASPHALT-PAVEMENT (S/S BY SS-S-445)

SS-C-731 – CRUSHED-STONE, CRUSHED-GRAVEL, AND CRUSHED-SLAG, (FOR) BITUMINOUS-CONCRETE BASE OR SURFACE-COURSE (S/S BY SS-S-445)

SS-C-736 – CRUSHED-STONE AND CRUSHED-SLAG, FOR BITUMINOUS-MACADAM BASE OR SURFACE-COURSE (S/S BY SS-S-445)

SS-C-741 – CRUSHED STONE, CRUSHED SLAG, AND GRAVEL, FOR BITUMINOUS SURFACE TREATMENT (S/S BY SS-S-445)

SS-C-743 – CRUSHED STONE, CRUSHED SLAG, AND GRAVEL, (FOR) RAILROAD BALLAST (S/S BY SS-S-449)

SS-C-744 – CRUSHED STONE, CRUSHED SLAG, AND GRAVEL, (FOR) SEWAGE TRICKING FILTER MEDIA (SUPESEDED BY SS-S-448)

SS-C-746 – CRUSHED STONE AND CRUSHED SLAG, FOR WATER-BOUND BASE OR WEARING COURSE (S/S BY SS-S-445)

SS-F-001032 – FLOOR COVERING, ASPHALTIC FELT (BITUMIMOUS TYPE SURFACE) (NO S/S DOCUMENT)

SS-F-111 – FACING, FOUNDRY, CARBON BASE

SS-G-1812 – Gilsonite, Natural Asphalt (Pavement Sealer) (No S/S Document)

SS-G-651 – GRANIT BLOCKS, RECUT GRANITE, AND DURAX GRANITE PAVEMENTS

SS-G-659 – Graphite, Dry (Lubricating)

SS-G-691 – GRINDSTONE, NATURAL, MOUNTED

SS-J-570 – Joint Compounds and Tape, Wallboard (for Gypsum Wallboard Construction) (S/S by ASTM-C475)

SS-L-1682 – LAPPING AND GRINDING COMPOUND, VALVE (S/S BY A-A-1203)

SS-L-30 – Lath and Board Products, Gypsum (S/S by A-A-2304)

SS-L-351 – Lime, Hydrated (for) Structural Purposes (S/S by ASTM-C206 and ASTM-C207)

SS-L-361 – LIME, HYDRAULIC, HYDRATED (USE ASTM C141)

SS-M-351 – MINERAL FILLER, (FOR) SHEET ASPHALT OR ASPHALTIC CONCRETE PAVEMENTS (PORTLAND CEMENT, LIMESTONE DUST AND DOLOMITE DUST)

SS-M-51 – MATERIALS, (FOR) CUSHION COURSE, BRICK, STONE-BLOCK, OR WOOD-BLOCK PAVEMENTS (SAND, SLAG, LIMESTONE, SCREENING, ETC.)

SS-P-001605 – PENCIL, LEAD, DRAWING

SS-P-00410 – Plaster, Gypsum (Keenes Cement) (Use SS-C-161)

SS-P-00450 – Plaster, Patching, Gypsum, (Sparkling) (S/S by A-A-1272)

SS-P-1229 – Pipe, Clay (Drain) (No S/S Document)

SS-P-1540 – Pipe, Bituminized Fiber (and Fittings) (S/S by ASTM-D1861, D2311, D2312, D2818, D1862, D2417, D2313, D2418)

SS-P-155 – PENCIL AND LEAD, ELECTROGRAPHIC (S/S BY A-A-2666 AND A-A-1828)

SS-P-166 – Pencils, Lead (See Notice 1 for Replacement Information)

SS-P-181 – PENCIL, LEAD, DRAWING

SS-P-183 – PENCIL, LITHOGRAPHIC (S/S BY A-A-354)

SS-P-186 – PENCIL, MECHANICAL (INCLUDING LEADS AND ERASERS) (S/S BY A-A-2801, A-A-2909, A-A-2910)

SS-P-196 – PENCIL: SPIRAL-PAPER-FORM; WAX, GLASS AND CHINA MARKING

SS-P-201 – Pencil, Nonmechanical, Colored Lead (See Notice 1 for Superseding Information)

SS-P-212 – PENCILS AND LEADS, REFILL, ARTISTS AND DRAFTING

SS-P-331 – Pipe, Sewer, Nonpressure, Asbestos and Cement and Coupling and Fittings (S/S by ASTM-C428 and ASTM-C644)

SS-P-340 – Pipe, Asbestos Cement Perforated Underdrain (No S/S Document)

SS-P-345 – Pipe, Bituminized-Fiber, (Sewer, Laminated-Wall, and Fittings) (S/S by SS-P-1540)

SS-P-351 – Pipe and Couplings, Asbestos Cement Pressure (Use ASTM-C296)

SS-P-356 – PIPE, BITUMINIZED-FIBER, SEWER, AND FITTINGS FOR SAME (S/S BY SS-P-001540)

SS-P-358 – Pipe, Bituminized Fiber, (Perforated Drainage) and Fittings for Same (S/S by SS-P-001540)

SS-P-359 – Pipe, Clay, (Perforated) (S/S by SS-P-361)

SS-P-361 – PIPE, CLAY (VITRIFIED FITTINGS, AND PERFORATED PIPE) (NO S/S DOCUMENT)

SS-P-371 – Pipe, Concrete (Nonreinforced, Sewer, Storm Drain, and Culvert) (S/S by ASTM-C14M, C443M)

SS-P-372 – Pipe, Concrete (Nonreinforced, Cast-in-Place)

SS-P-381 – PIPE, CONCRETE, (PRESSURE, REINFORCED PRETENSIONED REINFORCEMENT STEEL CYLINDER TYPE

SS-P-385 – Pipe, Steel, (Cement-Mortar Lining and Reinforced Cement-Mortar Coating)

SS-P-402 – Plaster, Gypsum (S/S by ASTM-C28/C28M and ASTM-C587)

SS-P-431 – PLASTER-BOARD, GYPSUM

SS-P-446 – Plaster, Dental, Impression and Modeling (S/S by A-A-53348)

SS-P-551 – PENCIL POINTER (ABRASIVE PAPER) (NO S/S DOCUMENT)

SS-P-570 – Pozzolan, for use in Portland Cement Concrete (S/S by SS-C-1960/5)

SS-P-680 – Priming-Material, Fatty Acid Pitch Base, Brushing and Spraying Consistency(for Concrete, Masonry, and Other Mineral Surfaces) (No S/S Document)

SS-P-821 – Pumice; Ground, Abrasive (No S/S Document)

SS-Q-351 – QUICKLIME, FOR STRUCTURAL PURPOSES (US/S BYASTM-C5)

SS-R-1781 – Roof-Coating, Asphalt-Base Emulsion (S/S by ASTM-D1227)

SS-R-1785 – ROOFING FELT, LAMINATED, ASPHALTIC MEMBRANE, WIRE MESH REINFORCED (NO S/S DOCUMENT)

SS-R-406 – ROAD & PAVING MATERIALS, METHODS OF SAMPLING & TESTING

SS-R-451 – Roofing Coating, Asphalt, Brushing Consistency (S/S by SS-A-694)

SS-R-501 – Roofing Felt, Asphalt Prepared, Smooth Surfaced (S/S by ASTM-D2626 and ASTM-D224)

SS-R-511 – ROOFING, ASPHALT AND ASBESTOS-PREPARED, MINERAL-SURFACED (S/S BY SS-R-630)

SS-R-521 – ROOFING AND SHINGLES, ASPHALT-PREPARED, MINERAL-SURFACED (S/S BY SS-S-300 AND SS-R-630)

SS-R-531 – ROOFING-SLAB, CONCRETE, PRECAST (NO S/S DOCUMENT)

SS-R-620 – ROOFING FELT, GLASS FIBER, ASPHALT COATED, (FOR FLASHING AND ROOFING)

SS-R-630 – ROOFING FELT (ROLL ASPHALT PREPARED MINERAL SURFACED (S/S BY ASTM-D249, ASTM-D3909 OR ASTM-D371)

SS-S-001416 – SEALING COMPOUND, ASPHALT AND CONCRETE SURFACES

SS-S-001534 – Shingle, Asphalt (Mineral Surfaced, Classes A, B, and C Fire Rating) (No S/S Document)

SS-S-00170/(the base document for this interim revision is SS-S-170) – SEALING COMPOUND, TWO-COMPONENTS, JET FUEL-RESISTANT COLD APPLIED, CONCRETE PAVING

SS-S-110 – Screen, Window, Metal (Aluminum Tubular Frame, and Tension) (No S/S Document)

SS-S-111 – Sound Controlling Materials (Trowel and Spray Applications)

SS-S-118 – SOUND CONTROLLING (ACOUSTICAL) TILES AND PANELS (S/S BY ASTM-E1264)

SS-S-1401 – Sealant, Joint, Non-Jet-Fuel-Resistant, Hot-Applied, for Portland Cement and Asphalt Concrete Pavements (No S/S Documents)

SS-S-156 – SEALER, COLD APPLICATION, EMULSION TYPE, FOR JOINTS IN CONCRETE (USE SS-S-200)

SS-S-158 – SEALING COMPOUND, COLD-APPLICATION READY-MIXED LIQUEFIER TYPE, FOR JOINTS IN CONCRETE (USE SS-S-156)

SS-S-159 – SEALING COMPOUND, COLD-APPLICATION MASTIC MULTIPLE COMPONENT TYPE-FOR JOINTS IN CONCRETE

SS-S-1614 – Sealants, Joint, Jet-Fuel-Resistant, Hot-Applied, for Portland Cement and Tar Concrete Pavements (No S/S Document)

SS-S-164 – SEALER, HOT POURED TYPE, FOR JOINTS IN CONCRETE (USE S5-S-1401)

SS-S-167 – SEALING COMPOUND, JET-FUEL RESISTANT, HOT APPLIED, CONCRETE PAVING (USE SS-S-1614)

SS-S-168 – Sealing Compound, Sewer, Bituminous Two Component, Mineral Filled, Cold Applied (See SS-S-169)

SS-S-169 – SEALER, JOINT, SEWER, MINERAL-FILLED, HOT-POUR (NO S/S DOCUMENT)

SS-S-170/(an interim revision also exists for this document number as SS-S-00170A) – Sealing Compound, Two Components, Jet Fuel Resistant, Cold Applied, Concrete Paving (Use SS-S-200)

SS-S-171 – Sealer, Mineral-Filled Asphalt, for Joints in Concrete (Use SS-S-1041)

SS-S-195 – SEALING COMPOUND, TWO COMPONENT, ELASTOMERIC, POLMER TYPE, COLD APPLIED, CONCRETE PAVING JOINTS (USE SS-S-200)

SS-S-1996 – SEALER, WATER AND WEATHER RESISTANT, FOR ASPHALT, CONCRETE, AND MASONRY SURFACES (NO S/S DOCUMENT)

SS-S-200 – Sealants, Joint, Two-Component, Jet-Blast-Resistant, Cold-Applied, for Portland Cement Concrete Pavement (No S/S Document)

SS-S-210 – Sealing Compound, Preformed Plastic, for Expansion Joints and Pipe Joints (No S/S Document)

SS-S-26 – Salt, Rock and Evaporated (S/S by SS-S-550)

SS-S-276 – Sheathing Board, Gypsum (S/S by SS-L-30)

SS-S-283 – Sheets, Flat, Asbestos Cement (S/S by SS-B-755)

SS-S-291 – Shingles: Asbestos-Cement,(Roofing) (S/S by ASTM-C222)

SS-S-294 – SHINGLE, ASPHALT (MINERAL SURFACED, UNIFORM THICKNESS, CLASS A FIRE RATING)

SS-S-295 – SHINGLE, ASPHALT (MINERAL SURFACED, UNIFORM THICKNESS, CLASS B FIRE RATING)

SS-S-298 – SHINGLES, ORGANIC FIBER, ASPHALT (MINERAL-SURFACED) (THICK-BUTT)

SS-S-300 – SHINGLES, ORGANIC FIBER, ASPHALT (MINERAL SURFACED) (UNIFORM THICKNESS)

SS-S-31 – SALT, TABLE (REFER TO A-A-20041)

SS-S-346 – Siding (Shingles, Clapboards, and Sheets) Asbestos-Cement (No S/S Document)

SS-S-360 – Silica, Pulverized, Foundry Mold Wash (No S/S Document)

SS-S-439 – Slabs, Roofing, Precast, Gypsum (S/S by SS-T-315)

SS-S-445 – Slag, Stone, and Gravel, Crushed (for Bituminous Paving Mixtures) (S/S by ASTM-D692, ASTM-D693 and ASTM-D1139)