American National Standards Institute (ANSI)

Documents

• ANSI-B32.4M – Metal Products, Preferred Metric Sizes for Round, Square, Rectangle and Hexagon (No S/S Document)
• ANSI-B32.5 – Metal Products, Tubular, other than Pipe, Preferred Metric Sizes for
• ANSI-B32.6 – Metal Products, Tubular, Preferred Metric Equivalents of Inch Sizes for, other than Pipe (No S/S Document)
• ANSI-B40.1M – Gauge, Pressure Indicating Dial Type, Elastic Element (Metric) (S/S by ASME-B40.100)
• ANSI-B5.10 – TAPERS, MACHINE, SELF HOLDING AND STEEP TAPER SERIES (REPLACED BY ASME-B5.10)
• ANSI-B5.16 – LATHES, ENGINE & TOOL ROOM, ACCURACY OF (NO S/S DOCUMENT)
• ANSI-B5.18 – Milling Machines, Spindle Noses and Tool Shanks for
• ANSI-B5.35 – Discs, Abrasive and Plate Mounted Wheels, Machine Mounting Specification for (S/S by ASME-B5.35)
• ANSI-B5.40 – Spindle Noses and Tool Shanks for, Horizontal Boring Machines (No S/S Document)
• ANSI-B5.51M – PREFERRED SI UNITS FOR MACHINE TOOLS (NO S/S DOCUMENT)
• ANSI-B5.53M – Cutter and Tool Grinding Machines (No S/S Document)
• ANSI-B5.8 – Chucks and Chuck Jaws (No S/S Document)
• ANSI-B5.9 – Spindle Noses for Tool Room Lathes, Engine Lathes, Turret Lathes, and Automatic Lathes (No S/S Document)
• ANSI-B6.1 – GEARS, SPUR, COARSE-PITCH INVOLUTE, TOOTH PROPORTIONS FOR (NO S/S DOCUMENT)
• ANSI-B7.1 – Abrasive Wheels, Use, Care and Protection of, Safety Codes for the
• ANSI-B7.7 – Materials, Abrading with Coated Abrasives Systems, Safety Requirements for (see Notice of Withdrawal for Replacement Information)
• ANSI-B71.1 – Consumer Turf Care Equipment – Pedestrian-Controlled Mowers and Ride-On Mowers – Safety Specifications
• ANSI-B74.12 – Specifications for the Size of Abrasive Grain Grinding Wheels, Polishing and General Industrial Uses
• ANSI-B74.13 – Grinding Wheels and Other Bonded Abrasives, Marking for Identifying (Replaced with CAMI-B74.13)
• ANSI-B74.18 – Grain, Grading of Certain Abrasive, on Coated Abrasive Products, Specifications for (See Notice for Replacement Information)
• ANSI-B74.2 – Grinding Wheels, Shape and Sizes of, Mounted Wheels, Sizes and Identification of, Specification for
• ANSI-B74.3 – Diamond or CBN Abrasive Products, Shape and Sizes of, Specification for (No S/S Document)
• ANSI-B92.1 – Involute Splines and Inspection (No S/S Document)
• ANSI-B92.2M – Spline, Metric Module Involute
• ANSI-B92.2MA – Spline, Part III, Metric Module Involute (S/S by ANSI-B92.2M)
• ANSI-B93.114M – MACHINERY, INDUSTRIAL, PNEUMATIC FLUID POWER - SYSTEM STANDARD FOR (NO S/S DOCUMENT)
• ANSI-B94.19 – Milling Cutters and End Mills (No S/S Document)
• ANSI-B94.2 – Reamers (No S/S Document)
• ANSI-B94.25 – TOOL, CUTTING, INDEXABLE INSERTS FOR (NO S/S DOCUMENT)
• ANSI-C1 – ORDER NFPA 70-78
• ANSI-C113.1 – ORDER NFPA 79-77
• ANSI-C119.1 – Electric, Connectors - Sealed Insulated Underground Connector Systems Rated 600 Volts
• ANSI-C12.20 – Electricity Meters – 0.1, 0.2 and 0.5 Accuracy Classes
• ANSI-C12.7 – Requirements for Watthour Meter Sockets
• ANSI-C135.30 – Zinc-Coated Ferrous Ground Rods For Overhead Or Underground Line Construction
• ANSI-C135.7 – Zinc-Coated Spool Type Secondary Racks, American National Standard for (No S/S Document)
• ANSI-C136.10 – Roadway and Area Lighting Equipment - Locking-Type Photocontrol Devices and Mating Receptacles- Physical and Electrical Interchangeability and Testing
• ANSI-C136.13 – Roadway Lighting - Metal Brackets for Wood Poles, Standard for
• ANSI-C136.14 – Roadway Lighting Equipment - Enclosed Side-Mounted Luminaires for Horizontal-Burning High-Intensity-Dishcharge Lamps
• ANSI-C136.20 – Roadway Lighting Equipment - Fiber-Reinforced Plastic (FRP) Lighting Poles
• ANSI-C136.21 – Roadway and Area Lighting Equipment— Vertical Tenons Used with Post Top-mounted Luminaires
• ANSI-C136.3 – Roadway Lighting Equipment- Luminaire Attachments, Standard for
• ANSI-C18.1M – BATTERIES AND DRY CELLS SPECIFICATIONS
• ANSI-C2 – Electrical Safety Code, National (See Notice of Withdrawal for Replacement Information)
• ANSI-C29.1 – Test Methods for Electrical Power Insulators
• ANSI-C29.2 – Insulators-Wet-Process Porcelain and Toughened Glass-Suspension Type ( S/S by ANSI/NEMA C29.2A and ANSI/NEMA C29.2B)
• ANSI-C29.3 – Insulators-Wet-Process Porcelain (Spool Type)
• ANSI-C29.8 – Wet-Process Porcelain Insulators - Apparatus, Cap and Pin Type
• ANSI-C37.04 – Rating Structure, AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis (No S/S Document)
• ANSI-C37.09 – AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis, Test Procedure for (No S/S Document)
• ANSI-C37.11 – Circuit Breakers, High Voltage, Rated on a Symmetrical Current Basis or a Total Current Basis, Requirements for (No S/S Document)
• ANSI-C37.12 – Circuit Breakers, AC High-Voltage, Rated on a Symmetrical Current Basis (See Notice of Withdrawal for Replacement Information)
• ANSI-C37.121 – Switchgear – Unit Substations – Requirements
• ANSI-C37.13 – Low-Voltage AC Circuit Power Breakers used in Enclosures (Correct Identification Should be IEEE-C37.13) (No S/S Document)
• ANSI-C37.16 – Circuit Breaker, Power and AC Power Circuit Protectors, Preferred Ratings and Related Requirements and Application Recommendations for Low Voltage (No S/S Document)
• ANSI-C37.17 – TRIP DEVICE, FOR AC & GENERAL PURPOSE DC LOW VOLTAGE POWER CIRCUIT BREAKER, STANDARD FOR
• ANSI-C37.32 – Air Switches, Bus Supports, and Switch Accessories, American National Standard Schedules of Preferred Ratings, Manufacturing Specifications and Application Guide for High Voltage (No S/S Document)
• ANSI-C37.42 – Distribution Cutout and Fuse Link, Specifications for (S/S by IEEE-C37.42)
• ANSI-C37.44 – DISTRIBUTION OIL CUTOUTS AND FUSE LINKS, STANDARD SPECIFICATION FOR
• ANSI-C37.46 – FUSE, POWER, & FUSE DISCONNECTING SWITCHES
• ANSI-C37.47 – DISTRIBUTION FUSE DISCONNECTING SWITCHES, FUSE SUPPORTS, AND CURRENT-LIMITING FUSES (NO S/S DOCUMENT)
• ANSI-C37.6 – Circuit Breaker, AC High Voltage, Rated on a Symmetrical Current Basis, Preferred Ratings and Related Required Capabilities for (No S/S Document)
• ANSI-C37.90 – Relays and Relay System Associated with Electric Power Apparatus (Correct Identification Should be IEEE-C37.90) (No S/S Document)
• ANSI-C39.1 – Electrical Analog Indicating Instruments, Requirements for (No S/S Document)
• ANSI-C50.10 – Machines, Synchronous, Rotating Electrical for (No S/S Document)
• ANSI-C50.12 – Salient-Pole Synchronous Generators and Generator/Motors for Hydraulic Turbine Applications, Requirements for (No S/S Document)
• ANSI-C50.13 – Generator, Cylindrical Rotor Synchronous, Rotating Electrical Machinery American National Standard for (No S/S Document)
• ANSI-C50.41 – Polyphase Induction Motors For Power Generation Stations
• ANSI-C57.12.10 – Transformer 230 000 Volts and Below 833/958 through 8333/10 417 KVA, Single Phase, and 750/862 through 60 000/80 000/100 000 KVA, Three Phase, American National Standard Requirements for (See Notice of Withdrawal for Replacement Information)
• ANSI-C57.12.20 – Overhead-Type Distribution Transformers 500 kVA and Smaller; High Voltage, 34 500 V and Below; Low Voltage, 7970/13 800Y V and Below
• ANSI-C57.12.22 – TRANSFORMER, WITH HIGH VOLTAGE BUSHINGS; HIGH VOLTAGE 34 500 GRDY/19 920 VOLTS & BELOW, 2500 KVA & SMALLER, PAD MOUNTED, COMPARTMENTAL TYPE, SELF COOLED, THREE PHASE DISTRIBUTION, AMERICAN NATIONAL STANDARD REQUIREMENTS FOR
• ANSI-C57.12.25 – Transformer, With Separable Insulated High Voltage Connectors, High Voltage, 34,500 GRDY/19 920 Volts & Below, Low Voltage 240/120 Volts, 167 KVA & Smaller, Pad Mounted, Compartmental Type, Self Cooled, Single Phase Distribution
• ANSI-C57.12.26 – Pad-Mounted Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers for use with Separable Insulated High-Voltage Connectors, High-Voltage, 34 500 GRD Y/19 920 Volts and Below; 2500 KVA and Smaller, for Transformers (No S/S Document)
• ANSI-C57.13 – Instrument Transformers, Requirements for (No S/S Document)
• ANSI-C63.14 – Dictionary of Electromagnetic Compatibility (EMC) Including Electromagnetic Environmental Effects (E3)
• ANSI-C73A – Plugs and Receptacles, Dimensions of Attachment, for Marine Ship-to-Shore use for Small Craft (See Notice of Withdrawal for Replacement Information)
• ANSI-C78.1 – Lamp, Fluorescent, Dimensional and Electrical Characteristics of - Rapid Start Types, American National Standard for the (No S/S Document)
• ANSI-C78.1341 – Electric Lamps - 750-Watt, 120-Volt Self-Ballasted Mercury Lamps (See Notice of Withdrawal for Replacement Information)
• ANSI-C78.1342 – Electric Lamps - 160-Watt 120-Volt B87 Self-Ballasted Mercury Lamps (See Notice of Withdrawal for Replacement Information)
• ANSI-C78.1350 – Lamps Electric - 400-Watt 100-Volt, S51 Single-Ended High-Pressure Sodium Lamps (No S/S Document)
• ANSI-C78.1351 – Lamps, Sodium, High Pressure, 250 Watt, 100-Volt S50 Single-Ended, Standard for Electric Lamps (No S/S Document)
• ANSI-C78.1352 – Lamps, Electric, 1000 Watt, 250-Volt, S52 Single-Ended High Pressure Sodium Lamps, Standard for (No S/S Document)
• ANSI-C78.1353 – Lamp Electric - 70-Watt S62 High Pressure Sodium Lamps (No S/S Document)
• ANSI-C78.1354 – Lamps Electric - 100 Watt, 55 Volt, S54 Single-Ended High-Pressure Sodium Lamps (No S/S Document)
• ANSI-C78.1355 – Lamps, Electric, 150-Watt, 55-Volt, S55 High-Pressure Sodium Lamps (No S/S Document)
• ANSI-C78.1358 – Electric Lamps, 35-Watt S76 Single-Ended High-Pressure Sodium Lamps, American Standard for (No S/S Document)
• ANSI-C78.1359 – Lamps, Electric, 50-Watt, S68 Single-Ended, High-Pressure Sodium Lamp (No S/S Document)
• ANSI-C78.1375 – LAMPS, ELECTRIC - 400-WATT, M59 SINGLE-ENDED METAL-HALIDE LAMPS (NO S/S DOCUMENT)
• ANSI-C78.1376 – LAMPS, 1,000-WATT M47 METAL-HALIDE, FOR ELECTRIC LAMPS (NO S/S DOCUMENT)
• ANSI-C78.1377 – ELECTRIC LAMPS - 175-WATT, M57 SINGLE-ENDED METAL-HALIDE LAMPS (NO S/S DOCUMENT)
• ANSI-C78.1378 – LAMPS, ELECTRIC - 250-WATT, M58 SINGLE-ENDED METAL-HALIDE LAMPS (NO S/S DOCUMENT)
• ANSI-C78.1403 – LAMPS, ELECTRIC - TUNGSTEN HALOGEN LAMPS WITH G6.35, GX.35 AND GY6.35 BASES
• ANSI-C78.1404 – Electric Lamps - DNF Projection Lamp (No S/S Document)
• ANSI-C78.1405 – Electric Lamps - ELH Projection Lamp (No S/S Document)
• ANSI-C78.1408 – LAMP CBA PROJECTION (NO S/S DOCUMENT)
• ANSI-C78.1409 – Lamps, Electric EJL Protection Lamps (See Notice of Withdrawal for Replacement Information)
• ANSI-C78.1414 – DDM PROJECTION LAMP (NO S/S DOCUMENT)
• ANSI-C78.1415 – LAMP, DED PROJECTION (NO S/S DOCUMENT)
• ANSI-C78.1416 – Electric Lamps - FHS Projection Lamp (No S/S Document)
• ANSI-C78.2 – Lamp, Fluorescent - Preheat-Start Types, Dimensional and Electrical Characteristics of (No S/S Document)