American National Standards Institute (ANSI)

ANSI-A108.1B – CERAMIC TILE ON A CURED PORTLAND CEMENT MORTAR SETTING BED WITH DRY-SET OR LATEX PORTLAND CEMENT MORTAR, INSTALLATION OF (NO S/S DOCUMENT)

ANSI-A108.1C – CERAMIC TILE IN THE WET-SET METHOD WITH PORTLAND CEMENT MORTAR OR INSTALLATION OF CERAMIC TILE ON A CURED PORTLAND CEMENT MORTAR SETTING BED WITH DRY-SET OR LATEX PORTLAND CEMENT MORTAR, INSTALLATION OF, CONTRACTORS OPTION (NO S/S DOCUMENT)

ANSI-A108.4 – CERAMIC TILE WITH ORGANIC ADHESIVES OF WATER CLEANABLE TILE SETTING EPOXY ADHESIVE, INSTALLATION OF (NO S/S DOCUMENT)

ANSI-A108.5 – CERAMIC TILE WITH (DRY-SET PORTLAND CEMENT MORTAR OR LATEX-PORTLAND CEMENT MORTAR), INSTALLATION OF (NO S/S DOCUMENT)

ANSI-A108.6 – CERAMIC TILE WITH CHEMICAL RESISTANT, WATER CLEANABLE TILE-SETTING AND GROUTING EPOXY, INSTALLATION OF (NO S/S DOCUMENT)

ANSI-A112.19.4M – PORCELAIN ENAMELED FORMED STEEL PLUMBING FIXTURES (NO S/S DOCUMENT)

ANSI-A112.26.2 – PERFORMANCE REQUIREMENTS FOR WATER PRESSURE REDUCING VALVES FOR DOMESTIC WATER SUPPLY SYSTEMS (NO S/S DOCUMENT)

ANSI-A112.6.1M – SUPPORTS FOR OFF THE FLOOR PLUMBING FIXTURES FOR PUBLIC USE (NO S/S DOCUMENT)

ANSI-A115.1 – STEEL DOOR AND STEEL FRAME PREPARATION FOR MORTISE LOCKS FOR 1-3/8" AND 1-3/4" DOORS STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)

ANSI-A115.12 – STEEL FRAME & STEEL DOOR PREPARATION FOR OFFSET INTERMEDIATE PIVOT AMERICAN NATIONAL STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)

ANSI-A115.13 – STEEL FRAME & STEEL DOOR PREPARATION FOR TUBULAR DEADLOCKS AMERICAN NATIONAL STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)

ANSI-A115.14 – STEEL DOORS FOR OPEN BACK STRIKES PREPARATION AMERICAN NATIONAL STANDARD SPECIFICATION (NO S/S DOCUMENT)

ANSI-A115.15 – STEEL FRAME & STEEL DOOR PREPARATION FOR BORED OR CYLINDRICAL LOCKS INSTALLED IN PREHUNG INSULATED AMERICAN NATIONAL STANDARD SPECIFICATIONS FOR (NO S/S DOCUMENT)

ANSI-A115.16 – DOUBLE TYPE LOCKS IN PREHUNG INSULATED STEEL DOORS AND STEEL FRAMES, PREPARATION FOR (NO S/S DOCUMENT)

ANSI-A115.17 – DOUBLE TYPE LOCKS IN STANDARD 1-3/8" AND 1-3/4" STEEL DOORS AND STEEL FRAMES, PREPARATION FOR, STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)

ANSI-A115.2 – STEEL DOOR AND STEEL FRAME PREPARATION FOR BORED OR CYCLINDRICAL LOCKS FOR 1-3/8" AND 1-3/4" DOORS (NO S/S DOCUMENT)

ANSI-A115.4 – STEEL DOOR AND FRAME PREPARATION FOR LEVER EXTENSION FLUSH BOLTS STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)

ANSI-A115.5 – STEEL FRAME PREPARATION FOR 181 SERIES & 190 SERIES DEAD LOCK STRIKES, AMERICAN NATIONAL STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)

ANSI-A115.6 – STEEL DOOR AND FRAME PREPARATION FOR PREASSEMBLED DOOR LOCKS STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)

ANSI-A115.7 – STEEL FRAME & STEEL DOOR PREPARATION FOR FLOOR CLOSERS, LIGHT DUTY, CENTER HUNG, SINGLE OR DOUBLE ACTING CENTER HUNG, SINGLE OR DOUBLE ACTING, OFFSET HUNG, SINGLE ACTING AMERICAN NATIONAL STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)

ANSI-A117.1 – BUILDINGS AND FACILITIES, ACCESSIBLE AND USABLE

ANSI-A118.1 – CEMENT MORTAR, DRY-SET PORTLAND, STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)

ANSI-A118.11 – COMENTITIOUS BACKER UNITS, INTERIOR INSTALLATION OF (NO S/S DOCUMENT)

ANSI-A118.3 – CHEMICAL RESISTANT, WATER CLEANABLE TIEL SETTING AND GROUTING EPOXY AND WATER CLEANABLE TIEL SETTING EPOXY ADHESIVE (NO S/S DOCUMENT)

ANSI-A118.4 – CEMENT MORTAR, LATEX-PORTLAND (NO S/S DOCUMENT)

ANSI-A118.9 – CEMENTITIOUS BACKER UNITS, TEST METHODS AND SPECIFICATIONS (NO S/S DOCUMENT)

ANSI-A135.4 – Hardboard Basic

ANSI-A136.1 – Ceramic Tile, Standard for Organic Adhesives for Installation of (No S/S Document)

ANSI-A137.1 – TILE, CERAMIC (NO S/S DOCUMENT)

ANSI-A14.1 – Ladders - Wood Safety Requirements

ANSI-A14.2 – Ladders, Portable Metal, Safety Requirements

ANSI-A14.3 – Ladders- Fixed-Safety Requirements ANS for

ANSI-A151.1 – PHYSICAL ENDURANCE FOR STEEL DOORS AND HARDWARE ENFORCINGS, PROCEDURE AND ACCEPTANCE CRITERIA FOR (NO S/S DOCUMENT)

ANSI-A161.1 – CABINETS, KITCHEN AND VANITY, RECOMMENDED PERFORMANCE & CONSTRUCTION STANDARDS FOR (NO S/S DOCUMENT)

ANSI-A161.2 – COUNTERTOPS, FABRICATED HIGH PRESSURE DECORATIVE LAMINATE, PERFORMANCE STANDARDS FOR (NO S/S DOCUMENT)

ANSI-A208.1 – MAT-FORMED WOOD PARTICLE BOARD, STANDARD FOR (NO S/S DOCUMENT)

ANSI-A21.14 – GAS, DUCTILE-IRON FITTINGS 3-INCH THROUGH 24-INCH, STANDARD FOR (NO S/S DOCUMENT)

ANSI-A21.52 – DUCTILE-IRON PIPE, CENTRIFUGALLY CAST, FOR GAS (NO S/S DOCUMENT)

ANSI-A92.2 – Vehicle-Mounted Elevating And Rotating Aerial Devices

ANSI-A92.5 – Platforms, Elevating Work, Boom,-Supported

ANSI-ASA-S1.4/1 – Electroacoustics – Sound Level Meters – Part 1: Specifications

ANSI-ASA-S1.4/2 – Electroacoustics - Sound Level Meters - Part 2: Pattern Evaluation Tests

ANSI-ASA-S1.4/3 – Electroacoustics - Sound Level Meters - Part 3: Periodic Tests

ANSI-B109.1 – Gas, Diaphragm Type, Displacement Meters (500 Cubic Feet per Hour Capacity and Under)

ANSI-B109.2 – Gas, Diaphragm Type, Displacement Meters (OVER 500 Cubic Feet per Hour Capacity)

ANSI-B109.3 – Rotary-Type gas Displacement Meters

ANSI-B11.1 – Machine Tools-Mechanical Power Presses Safety Requirements for Construction, Care, and Use (No S/S Document)

ANSI-B11.10 – Machine Tools - Safety Requirements for Metal Sawing Machines

ANSI-B11.11 – Cutting Machines, Gear, Safety Requirements for the Construction Care and Use (No S/S Document)

ANSI-B11.12 – Machine Tools – Safety Requirements for Roll-forming and Roll-bending Machines

ANSI-B11.13 – Machine Tools, Single and Multiple Spindle Automatic Screw/Bar and Chucking Machines Safety Requirements for the Construction, Care, and Use (No S/S Document)

ANSI-B11.15 – Safety Requirements for the Construction, Care and Use of, Tube and Shape Bending Machines (No S/S Document)

ANSI-B11.2 – Safety Requirements for Hydraulic and Pneumatic Power Presses

ANSI-B11.3 – Machine Tools - Power Press Brakes - Safety Requirements for Construction, Care, Use (No S/S Document)

ANSI-B11.4 – Safety requirements for Shears

ANSI-B11.5 – Ironworkers, Machine Tools, Safety Requirements for Construction, Care and Use - American National Standard for

ANSI-B11.6 – Safety Requirements for Manual Turning Machines (Lathes) with or without Automatic Control

ANSI-B11.7 – Machine Tools - Cold Headers and Cold Formers - Safety Requirements for Construction, Care, and Use

ANSI-B11.8 – Safety Requirements for Manual Milling, Drilling and Boring Machines with or without Automatic Control

ANSI-B11.9 – Machine Tools – Safety Requirements for Grinding Machines

ANSI-B16.12 – Fittings, Drainage, Cast Iron Threaded

ANSI-B16.18 – Fittings, Cast Copper Alloy Solder Joint Pressure

ANSI-B173.1 – Nail Hammers - Safety Requirements for (See Notice of Withdrawal for Replacement Information)

ANSI-B173.3 – Hand Tools - Heavy Striking Tools - Safety Requirements (See Notice of Withdrawal for Replacement Information)

ANSI-B173.8 – Hammers, Riveting, Scaling, and Tinners' Setting - Safety Requirements (See Notice of Withdrawal for Replacement Information)

ANSI-B18.1.1 – RIVET, SMALL SOLID (NO S/S DOCUMENT)

ANSI-B18.1.2 – RIVET, LARGE (NO S/S DOCUMENT)

ANSI-B18.11 – SCREW, MINIATURE (NO S/S DOCUMENT)

ANSI-B18.12 – Glossary of Terms for Mechanical Fasteners

ANSI-B18.13 – Screw and Washer Assemblies - SEMS (Inch Series)

ANSI-B18.17 – Nut, Wing, Thumb Screws and Wing Screws (No S/S Document)

ANSI-B18.2.3.1M – Screw, Cap, Hex Head - Metric W/ERRATA (No S/S Document)

ANSI-B18.2.3.2M – Screw, Cap, Formed Hex Head-Metric (W/ERRATA) (No S/S Document)

ANSI-B18.2.3.3M – SCREW, HEAVY HEX HEAD - METRIC (NO S/S DOCUMENT)

ANSI-B18.2.3.5M – BOLT, HEX - METRIC - W/ERRATA (NO S/S DOCUMENT)

ANSI-B18.2.3.6M – BOLT, HEAVY HEX-METRIC (NO S/S DOCUMENT)

ANSI-B18.2.3.7M – BOLT, STRUCTURAL, HEAVY HEX - METRIC (NO S/S DOCUMENT)

ANSI-B18.2.3.8M – SCREW, LAG, HEX HEAD - METRIC (NO S/S DOCUMENT)

ANSI-B18.2.4.1M – METRIC HEX NUTS, STYLE 1 (W/ERRATA) (NO S/S DOCUMENT)

ANSI-B18.2.4.2M – Nut, Plain, Hex, Style 2 - Metric (S/S by ASME B18.2.6)

ANSI-B18.2.4.3M – NUT, SLOTTED, HEX METRIC W/DOD EXCEPTIONS W/ERRATA (NO S/S DOCUMENT)

ANSI-B18.2.4.4M – NUT, FLANGE, HEX METRIC (NO S/S DOCUMENT)

ANSI-B18.2.4.5M – NUT, JAM, HEX - METRIC - W/ERRATA (NO S/S DOCUMENT)

ANSI-B18.2.4.6M – NUT, HEAVY HEX - METRIC- W/ERRATA (NO S/S DOCUMENT)

ANSI-B18.22M – WASHER, FLAT, PLAIN - METRIC (W/ERRATA) (NO S/S DOCUMENT)

ANSI-B18.3.2M – Keys & Bits, Hexagon, Metric Series

ANSI-B18.3.4M – SCREW, CAP, HEXAGON, SOCKET BUTTON HEAD - METRIC (NO S/S DOCUMENT)

ANSI-B18.5.2.1M – BOLT, ROUND HEAD, SHORT SQUARE NECK - METRIC (NO S/S DOCUMENT)

ANSI-B18.6.1 – WOOD SCREWS (INCH SERIES) (NO S/S DOCUMENT)

ANSI-B18.6.4 – THREAD FORMING AND THREAD CUTTING TAPPING SCREWS, AND METALLIC DRIVE SCREWS (INCH SERIES) (NO S/S DOCUMENT)

ANSI-B18.7 – RIVETS, GENERAL PURPOSE SEMI TUBULAR RIVETS, FULL TUBULAR SPLIT AND RIVET CAP (NO S/S DOCUMENT)

ANSI-B18.8.1 – CLEVIS PINS & COTTER PINS (NO S/S DOCUMENT)

ANSI-B18.9 – BOLTS, PLOW (NO S/S DOCUMENT)

ANSI-B212.1 – Cutting Tools - Carbide Blanks and Brazed and Solid Single Point Tools

ANSI-B29.1 – ROLLER CHAINS, TRANSMISSION, ATTACHMENTS & SPROCKETS, PRECISION POWER

ANSI-B32.3 – Metal Products, Flat, Preferred Metric Sizes for (W/Supl. ANSI B32.3A-78) (No S/S Document)

American National Standards Institute (ANSI)

American National Standards Institute (ANSI)

Documents