Air Force/Navy AN

Documents

• AN3352 – RELAY, 55 AMP, 2PST, UNSEALED, CLASS O (S/S BY MS24178)
• AN3353 – RELAY, 50 AMP, 1 PDT, UNSEALED, CLASS O (S/S BY MS24187)
• AN3354 – RELAY, 50 AMP, 2PDT, INTERMITTENT, UNSEALED, CLASS O (USE MS25030
• AN3362 – Relay, 100 AMP, 2PST, Unsealed, Class O, Type II
• AN3364 – RELAY, 100 AMP, 2PDT, INTERMITTENT, CLASS O (USE MS25031)
• AN3370 – RELAY, 200 AMP, 1 PST, UNSEALED, CLASS O (S/S BY MS24171)
• AN3371 – RELAY, 200 AMP, IPST, INTERMITTENT, UNSEALED, CLASS 0 (USE MS-24172)
• AN3372 – Relay, 200 AMP, 2PST, Class O, Unsealed
• AN3374 – RELAY, 200 AMP, 2PDT, INTERMITTENT, CLASS O, UNSEALED (USE MS 25032)
• AN3380 – RELAY, 400 AMP, 1 PST, UNSEALED, CLASS O (S/S BY MS24185)
• AN3381 – RELAY, 400 AMP, 1PST, INTERMITTENT UNSEALED, CLASS O (S/S BY MS24179)
• AN3391 – RELAY, SOLENOID - 600 AMP, AUTOMATIC DROP-OUT (S/S BY MS24174)
• AN340 – Nut,  Plain,  Hexagon, Non-Structural, Coarse Thread
• AN3400 – LIGHT ASSEMBLY - RED AND CLEAR ILLUMINATION, DOME (S/S BY MS25358)
• AN341 – NUT, PLAIN, HEXAGON, ELECTRICAL (USE MS35649 OR MS35650)
• AN3420 – BUSHING - CABLE ADAPTER, TELESCOPING (S/S BY MS3420)
• AN3427 – CRIMPING TOOL, ELECTRIC CABLE TERMINAL, HAND (FOR AF USE MS25020) (NAVAIR USE MS90485)
• AN3428 – CRIMPING TOOL, ELECTRIC CABLE TERMINAL.HAND, 22-10 CAPACITY (USE MS 17776)
• AN3430 – CABLE ASSEMBLY, POWER, ELECTRICAL, 115/200 VOLTS, 3 PHASE (S/S BY MS90328)
• AN3431 – CABLE ASSEMBLY, POWER, ELECTRICAL, 115 VOLT DC
• AN3433 – BUS & TERMINAL BLACK (S/S BY MS&25226)
• AN3434 – STRIP - TERMINAL BLOCK MOUNTING, NUT INSULATING (S/S BY MS25227)
• AN3435 – TERMINAL BLOCK - ELECTRICAL (NO S/S DOCUMENT)
• AN3436 – TERMINAL BLOCK ASSEMBLY - ELECTRICAL (S/S BY MS25123)
• AN345 – NUT, PLAIN, HEXAGON, NON-STRUCTURAL, FINE THREAD
• AN3496 – INVERTER&INSTRUMENT, CLASS A, 6 VOLT& SINGLE PHASE
• AN3499 – Inverter, Instrument, Class A, 100 Volt-Ampere 3 Phase S/S MS-16057)
• AN350 – NUT, PLAIN, WING (S/S BY MS35425 AND MS35426)
• AN3502 – LIGHT ASSEMBLY - CONTROL PANEL, PLASTIC LIGHTING PLATE (USE MS-25453)
• AN3513 – INVERTER-CLASS A 500 VOLT-AMP SINGLE PHASE (USE MS-17406)
• AN3514 – INVERTER-CLASS A 750 VOLT AMPERE SINGLE PHASE (USE MS-17406)
• AN3530 – INVERTER, CLASS C, 5,000 VOLT AMPERE, SINGLE PHASE
• AN3532 – INVERTER, CLASS A, 250&VOLT&ERE, 3-1 PHASE (USE MS25093)
• AN3533 – INVERTER-CLASS A 500 VOLT-AMPERE THREE PHASE (USE MS-17406)
• AN3534 – INVERTER-CLASS A 750 VOLT AMPERE THREE PHASE (USE MS-17406)
• AN355 – NUT- ENGINE, SLOTTED ( USE AN 310)
• AN356 – LOCK - NUT
• AN361 – NUT - SELF LOCKING, PLATE, COUNTERSUNK 100 DEG., 550 DEG. F (USE MS-21049 OR MS-21050)
• AN362 – NUT, SELF-LOCKING, PLATE, NON-COUNTERSUNK, 550 DEG. F (S/S BY MS21047 AND MS21048)
• AN3621 – GENERATOR - DIRECT CURRENT, 100 AMPERE 30 VOLT, HIGH SPEED RANGE (NO S/S DOCUMENT)
• AN3623 – GENERATOR&DIRECT CURRENT, 300 AMPERE 30 VOLT, HIGH SPEED RANGE
• AN3624 – GENERATOR&DIRECT CURRENT, 400 AMPERE, 30VOLT, HIGH SPEED RANGE
• AN363 – Nut, Self-Locking, 550 Degrees F
• AN3632 – GENERATOR&DIRECT CURRENT, 200 AMPERE, 30 VOLT WIDE SPEED RANGE
• AN3633 – GENERATOR-DIRECT CURRENT, 300 AMPERE 30 VOLT, WIDE SPEED RANGE (S/S BY MS-90332)
• AN3634 – GENERATOR, DIRECT CURRENT, 400 AMPERES, 30 VOLT, WIDE SPEED RANGE (S/S BY MS3364)
• AN364 – NUT-SELF LOCKING, THIN, 250 DEG. F (S/S BY MS21042, MS21083, OR MS21245)
• AN365 – NUT, SELF&LOCKING, 250 DEG. F (S/S BY MS&20365)
• AN3650 – GENERATOR&DIRECT CURRENT, 400 AMPERES, 30 VOLTS, WIDE SPEED RANGE 11INCH DIAMETER MOUNTING FLANGE
• AN366 – NUT-PLATE, COUNTERSUNK 82 DEG. (S/S BY MS21047, MS21048, OR MS21078)
• AN367 – Nut-Plate, Countersunk, 82 DEG (No S/S Document)
• AN373 – NUT - SELF LOCKING, PLATE, COUNTERSUNK 100 DEG., 250 DEG. F (S/S BY MS21049)
• AN380 – PIN, COTTER (NO S/S DOCUMENT)
• AN381 – PIN, COTTER (CORROSION-RESISTANT STEEL) (NO S/S DOCUMENT)
• AN385 – PIN TAPERED PLAIN (S/S BY MS-24692)
• AN386 – PIN - THREADED TAPER (S/S BY NASM386)
• AN392 – PIN & FLAT HEAD (1&8) (S/S BY MS&20392)
• AN393 – PIN - FLAT HEAD (3-16) (S/S BY MS20392)
• AN394 – PIN & FLAT HEAD (1&4) (S/S BY MS&20392)
• AN395 – PIN & FLAT HEAD (5&16) (S/S BY MS&20392)
• AN396 – PIN & FLAT HEAD (3&8) (S/S BY MS&20392)
• AN397 – PIN & FLAT HEAD (7&16) (S/S BY MS&20392)
• AN398 – PIN & FLAT HEAD (1&2) (S/S BY MS&20392)
• AN399 – PIN & FLAT HEAD (9&16) (S/S BY MS&20392)
• AN3THRUAN20 – BOLT - MACHINE, AIRCRAFT (S/S BY NASM3THRU20)
• AN400 – PIN - FLAT HEAD (5-8) (S/S BY MS20392)
• AN4009 – PUMP ASSEMBLY & HAND START AND EMERGENCY FUEL, TYPE D&2
• AN402 – PIN & FLAT HEAD (3&4) (S/S BY MS&20392)
• AN4022 – NIPPLE ASSEMBLY - PRIMING SYSTEM JET
• AN4023 – ELBOW ASSEMBLY & PRIMING SYSTEM JET
• AN4024 – TEE ASSEMBLY & PRIMING SYSTEM JET
• AN4027 – GASKET-SPARK PLUG (USE MS17840)
• AN4028 – MARKER & IGNITION CABLE (NO S/S DOCUMENT)
• AN4030 – DISTRIBUTOR & ENGINE PRIMER
• AN4032 – CLAMP & PRIMER LINE
• AN4038 – CONNECTION-STRAIGHT (3 BOLT FLANGE) ENGINE OIL (USE MS 28748)
• AN4039 – CONNECTION-ENGINE OIL 45 DEG (3 BOLT FLANGE)(USE MS 28749
• AN404 – PIN & FLAT HEAD (7&8) (S/S BY MS&20392)
• AN4040 – CONNECTION-ENGINE OIL 90 DEG. (3 BOLT FLANGE) USE MS-28750
• AN4042 – PLUG & SPARK PLUG HOLE (18MM&1.5MM PITCH)
• AN4043 – CARTRIDGE ASSEMBLY & CORROSION INHIBITOR DRAIN (USE MS26541)
• AN4044 – GASKET-TYPE XI ENGINE ACCESSORY DRIVE (USE MS9135)
• AN4045 – GASKET-TYPE X OR XV ENGINE ACCESSORY DRIVE (USE MS9134)
• AN4047 – GASKET - TYPE XII, OR TYPE XIV -A AND -B ENGINE ACCESSORY DRIVE (USE MS9136)
• AN4049 – CONNECTION - STRAIGHT (4 BOLT FLANGE) ENGINE OIL (USE MS28748)
• AN4050 – BUSHING & VACUUM AND HYDRAULIC&POWER&PUMPS ADAPTER (FOR TYPE I MOUNTING PAD AND DRIVE)
• AN4051 – BUSHING & VACUUM AND HYDRAULIC&POWER PUMPS ADAPTER (FOR TYPE II MOUNTING PAD AND DRIVE)
• AN4052 – Coupling, Shaft, Rigid
• AN4053 – CONNECTION & ENGINE OIL 45 DEG. (4 BOLT FLANGES) (SUPERSEDES USAF DWG 4489739) (S/S BY MS&28749)
• AN4055 – ADAPTER & TYPE XI DRIVE FLANGE
• AN4056 – CIRCLET & VACUUM AND HYDRAULIC&POWER PUMPS TYPE I MOUNTING PAD AND DRIVE ADAPTER
• AN4058 – GASKET-TYPE XIV-C ENGINE ACCESSORY DRIVE (USE MS9138)
• AN4059 – GASKET - TYPE XIII ENGINE ACCESSORY DRIVE (USE MS-9137)
• AN406 – PIN - FLAT HEAD (1) (S/S BY MS20392)
• AN4060 – PROTECTOR AND IGNITION LEAD TERMINAL (NO S/S DOCUMENT)
• AN4061 – PLUG - CRANKCASE DEHYDRATOR (S/S BY MS-3397)
• AN4062 – PLUG, ENGINE CYLINDER DEHYDRATOR, 18-MM THREAD (S/S BY MS-27215)
• AN4064 – PLUG ENGINE CYLINDER DEHYDRATOR (14-MM THREAD) (S/S BY MS-3396)
• AN4068 – ENVELOPE ENGINE PROTECTIVE (FOR V-770 ENGINE)
• AN4069 – ENVELOPE - ENGINE PROTECTIVE FOR R-670 AND R-680 ENGINES (NO S/S DOCUMENT)