FSC-MISC: Miscellaneous

Documents

• MIL-STD-280 – Definitions of Item Levels, Item Exchangeability, Models, and Related Terms (S/S by MIL-HDBK-505)
• MIL-STD-32 – Status Notes for Use on Military Sheet Form Standards (Use MIL-STD-962)
• MIL-STD-337 – DESIGN TO COST (NO S/S DOCUMENT)
• MIL-STD-399 – Microform Formats (No S/S Document)
• MIL-STD-40000 – PARTS CONTROL PROGRAM FOR NONDEVELOPMENTAL ITEMS (NDIS) (S/S BY MIL-HDBK-402)
• MIL-STD-405 – RIVETING, ROCKET AND GUIDED MISSILE STRUCTURAL, ALUMINUM AND ALUMINUM ALLOY BLIND RIVETS, MECHANICALLY EXPANDED TYPE
• MIL-STD-415 – TEST PROVISIONS FOR ELECTRONIC SYSTEMS AND ASSOCIATED EQUIPMENT, DESIGN CRITERIA FOR (NO S/S DOCUMENT)
• MIL-STD-437 – X-RAY STANDARD FOR BARE ALUMINUM ALLOY ELECTRODE WELDS
• MIL-STD-440 – SOLDERING TECHNIQUES FOR STANDARD TYPE SOLDER TERMINALS (USE MIL-STD-454)
• MIL-STD-443 – RATING CONDITIONS FOR THE DESIGN OF REFRIGERATION AND AIR CONDITIONING FIELD EQUIPMENT
• MIL-STD-446 – ENVIROMENTAL REQUIREMENTS FOR ELECTRONIC PARTS (NO S/S DOCUMENT)
• MIL-STD-447 – Definitions of Interchangeable Substitute and Replacement Items (No S/S Document)
• MIL-STD-448 – TESTS FOR CONSTRUCTION, INDUSTRIAL, AND MATERIALS HANDLING EQUIPMENT (NO S/S DOCUMENT)
• MIL-STD-451 – WEIGHT AND BALANCE DATA REPORTING FORMS FOR ROTORCRAFT (S/S BY MIL-STD-1374)
• MIL-STD-456 – ELECTRONIC PARTS, DATE AND SOURCE CODING FOR (S/S BY MIL-STD-1285)
• MIL-STD-473 – MAINTAINABILITY VERIFICATION/DEMONSTRATION/EVALUATION FOR AERONAUTICAL SYSTEMS (S/S BY MIL-STD-471)
• MIL-STD-499 – Engineering Management (S/S by IEEE15288.1)
• MIL-STD-643 – EVALUATION OF CONTRACTOR QUALITY CONTROL SYSTEMS
• MIL-STD-646 – Electrical Circuit (Wire Marking) Identification for Tactical Military Vehicles (No S/S Document)
• MIL-STD-673 – HOLE NUMBERING SYSTEM-PERFORATED PAPER TAPE (NO S/S DOCUMENT)
• MIL-STD-678 – PRINTER, PROJECTION, PHOTOGRAPHIC
• MIL-STD-689 – Mobile Communications and Electronic Design Classes
• MIL-STD-706 – POWER SUPPLY VOLTAGES, REGULATED, D.C. WITHIN ELECTRONIC EQUIPMENT
• MIL-STD-736 – UNITIZED EQUIPMENT DESIGN
• MIL-STD-743 – Cleaning and Protecting Piping for Hydraulic Power Transmission Equipment (S/S by MIL-STD-419)
• MIL-STD-752 – EQUIPMENT SPECTRUM SIGNATURES, COLLECTION STANDARD FOR (USE MIL-STD-449)
• MIL-STD-761 – ELECTRIC POWER, ALTERNATING CURRENT FOR SHIPBOARD USE, CHARACTERISTICS AND UTILIZATION (REPLACED BY MIL-STD-1399)
• MIL-STD-768/1 – INSTRUCTIONS FOR REPAIR OF AIRCRAFT AND WEAPONS REINFORCED PLASTIC AND SANDWICH STRUCTURES, PART I, ALL PLASTIC CONSTRUCTION
• MIL-STD-768/2 – INSTRUCTIONS FOR REPAIR OF AIRCRAFT AND WEAPONS SANDWICH STRUCTURES, PART II, METAL CONSTRUCTION (ASG)
• MIL-STD-775 – X-Ray Standards for Welding Electrode Qualification and Quality Conformance Test Welds (See Notice 1 for Replacement Information)
• MIL-STD-778 – Maintainability Terms and Definitions (S/S by MIL-STD-721)
• MIL-STD-782 – RECONNAISSANCE/MAPPING DATA MARKING (NO S/S DOCUMENT)
• MIL-STD-787 – JOINT OPTICAL RANGE INSTRUMENTATION TYPE DESIGNATION SYSTEM (NO S/S DOCUMENT)
• MIL-STD-788 – TEST REQUIREMENTS FOR REPLENISHMENT-AT-SEA, MACHINERY AND EQUIPMENT INSTALLATIONS, TENSIONED HIGHLINE STATIONS WITH ELECTRO-HYDRAULIC OR ELECTRO-MECHANICAL DRIVES (NO S/S DOCUMENT)
• MIL-STD-789 – Contractor Technical Information Coding of Replenishment Parts (S/S by MIL-PRF-49506)
• MIL-STD-802 – NUMBER, AIRCRAFT ENGINES AND ENGINE CYLINDERS, COMBUSTION CHAMBERS, FLAME TUBES, INNER LINERS, AND SIMILAR ITEMS (NO S/S DOCUMENT)
• MIL-STD-803 – HUMAN ENGINEERING DESIGN CRITERIA FOR AEROSPACE SYSTEMS AND EQUIPMENT (PART 1 AEROSPACE SYSTEM GROUND EQUIPMENT) (S/S BY MIL-STD-1472)
• MIL-STD-803/1 – HUMAN ENGINEERING DESIGN CRITERIA FOR AEROSPACE SYSTEMS AND EQUIPMENT (PART 1 AEROSPACE SYSTEM GROUND EQUIPMENT) (S/S BY MIL-STD-1472)
• MIL-STD-803/2 – HUMAN ENGINEERING DESIGN CRITERIA FOR AEROSPACE SYSTEMS AND EQUIPMENT PART 2. AEROSPACE VEHICLES AND VEHICLE EQUIPMENT (S/S BY MIL-STD-1472)
• MIL-STD-803/3 – HUMAN ENGINEERING DESIGN CRITERIA FOR AEROSPACE SYSTEMS AND EQUIPMENT PART 3. AEROSPACE VEHICLES AND VEHICLE EQUIPMENT (S/S BY MIL-STD-1472)
• MIL-STD-806 – Graphical Symbols for Logic Diagrams
• MIL-STD-829 – TERMS AND DEFINITIONS FOR MAINTAINABILITY (USE MIL-STD-778)
• MIL-STD-833 – MINIMIZATION OF HAZARDS OF ELECTROMAGNETIC RADIATION OF ELECTROEXPLOSIVE DEVICES (S/S BY MIL-STD-1512)
• MIL-STD-841 – MARKING OF AIRCRAFT AND MISSILE PROPULSION SYSTEM PARTS FABRICATED FROM CRITICAL HIGH TEMPERATURE ALLOYS (NO S/S DOCUMENT)
• MIL-STD-842 – UNIFORM PROCEDURES FOR TYPE DESIGNATION AND ITEM IDENTIFICATION (S/S BY MIL-STD-1812)
• MIL-STD-847 – Format Requirements for Scientific and Technical Reports Prepared by or for the Department of Defense (S/S ANSI Z39.18)
• MIL-STD-859 – Standard Calibration Table for Aeronautical Pressure Measuring Equipment
• MIL-STD-864 – SUPPORT EQUIPMENT FUNCTIONAL CLASSIFICATION CATEGORIES (NO S/S DOCUMENT)
• MIL-STD-875 – TYPE DESIGNATION SYSTEM FOR AERONAUTICAL AND SUPPORT EQUIPMENT (S/S BY MIL-STD-1812)
• MIL-STD-880 – Abbreviations for use on Airborne Equipment (S/S by MIL-STD 738)
• MIL-STD-881 – Work Breakdown Structures for Defense Materiel Items
• MIL-STD-885 – Procurement Data Packages (S/S by DOD-D-100 and DI-E-7031)
• MIL-STD-890 – ENVIRONMENTAL CONTROL,ENVIRONMENTAL PROTECTION, & ENGINE AIR BLEEDSUBSYSTEM PERFORMANCE & DESIGN REQUIREMENTSANALYSES (S/S BY MIL-E-87145)
• MIL-STD-891 – CONTRACTOR PARTS CONTROL AND STANDARDIZATION PROGRAM (USE MILSTD-965)
• MIL-T-11308 – TREATMENT AND PAINTING (FOR CONSTRUCTION AND ENGINEERING EQUIPMENT) (S/S BY MIL-T-704)
• MIL-T-12522 – THERMOGRAPH ML-227-( )
• MIL-T-14600 – TRANSMISSION-DIFFERENTIAL (CROSS DRIVE) ASSEMBLY FOR CARRIER, CARGO, AMPHIBIOUS, M76, PREPARATION FOR SHIPMENT AND STORAGE OF.
• MIL-T-18303 – Test Procedures; Preproduction, Acceptance, and Life for Aircraft Electronic Equipment, Format for
• MIL-T-21200 – TEST EQUIPMENT FOR USE WITH ELECTRONIC AND ELECTRICAL EQUIPMENT, GENERAL SPECIFICATION FOR
• MIL-T-22703 – TECHNICAL MANUAL, MAINTENANCE INSTRUCTIONS (FOR SURFACE-LAUNCHED GUIDED MISSILES)
• MIL-T-23103 – THERMAL PERFORMANCE EVALUATION, AIRBORNE ELECTRONIC EQUIPMENT AND SYSTEMS, GENERAL REQUIREMENT FOR (S/S BY MIL-STD-2218)
• MIL-T-2318 – THERMOMETER, INCUBATOR
• MIL-T-23336 – TECHNICAL DIRECTIVES (LETTER TYPE) PREPARATION OF
• MIL-T-2391 – TROCAR, HORSE
• MIL-T-24309 – TECHNICAL SUPPORT PLAN FOR ELECTRONIC EQUIPMENT (S/S BY MIL-STD-1369, MIL-STD-1388/1, AND MIL-STD-1388/2)
• MIL-T-2542 – TESTER, HOOF
• MIL-T-26673 – TEST PROGRAM FOR EQUIPMENT, CONTRACTOR& ESTABLISHED
• MIL-T-3343 – THERMOMETER, DAIRY
• MIL-T-55458 – THE ARMY EQUIPMENT RECORD SYSTEM (TAERS), FORMS AND DATA FOR
• MIL-T-6846 – TUBING; STEEL, CORROSION RESISTING (18-8) AIRCRAFT, HYDRAULIC SYSTEM, ANNEALED (S/S BY MIL-T-8504)
• MIL-T-7042 – THERMOCOUPLE; CHROMEL-ALUMEL, RANGE 0 TO 1,000 DEG. CENTRI-GRADE (NO S/S DOCUMENT)
• MIL-T-82313 – TECHNICAL PUBLICATIONS COVERING TRAINING DEVICES (S/S BY MIL-M-82376)
• MIL-T-83696 – TECHNICAL DATA, EXPLOSIVES HAZARD CLASSIFICATION, DEVELOPMENT OF (NO S/S DOCUMENT)
• MIL-T-9107 – TEST REPORTS, PREPARATION OF
• MIL-T-9887 – TECHNICAL MANUALS. COMMERCIAL TECHNICAL DATA (MISSILE-SPACE SYSTEMS)
• MIL-U-25900 – UNIFORM DESIGN CRITERIA FOR AIRBORNE ELECTRONIC EQUIPMENT
• MIL-V-17897 – VALVES AUTOMATIC REGULATING, TEMPERATURE ACTUATED, SHIPBOARD USE (S/S BY MIL-V-19772)
• MIL-V-24474 – VALUE ENGINEERING PROGRAM REQUIREMENTS (NAVAL SHIP SYSTEMS COMMAND) (NO S/S DOCUMENT)
• MIL-V-38352 – Value Engineering Program Requirements (S/S/ By MIL-STD-1771)
• MIL-V-45201 – VALUE ANALYSIS OF ORDNANCE EQUIPMENT
• MIL-V-55051 – VALUE ENGINEERING OF SIGNAL CORPS EQUIPMENT (USE MIL-V-38352)
• MIL-W-12518 – WELDING OF HOMOGENEOUS ARMOR, METAL-ARC, MANUAL, WITH FERRITIC ELECTRODES (USE MIL-W-46086 FOR REFERENCE)
• MIL-W-27076 – WORKMANSHIP STANDARDS FOR GROUND ELECTRONIC AND ASSOCIATED EQUIPMENT (S/S BY MIL-STD-454)
• MIL-W-5067 – WASHERS; SPRING LOCK (S/S BY FF-W-84)
• MIL-W-55135 – SAME NUMBER INADVERTENTLY ASSIGNED THESE TWO SPECS (WEAPONSIGHT INFRARED 21 JUN 61 FSC 5850 S/S BY MIL-W-55145) (SCALEPLATES 31 JUL 61 FSC 6625 S/S BY MIL-S-55170)
• MIL-W-82573 – WEAPONS SYSTEM, OR ORDNANCE SYSTEM, INTEGRATED MAINTENANCE REQUIREMENTS PLANS (IMRPS) DEVELOPMENT AND PREPARATION OF (USE MIL-P-24534)
• MS15031 – SOCKET, DECK (FOR METAL FURNITURE)
• MS25245 – CONNECTIONS, INPUT POWER AIRBORNE ELECTRONIC EQUIPMENT, 28-VOLT DC, 115-VOLT SINGLE-PHASE AC, OR 115/200 VOLT 3-PHASE AC, OR COMBINATIONS (ASG)
• MS25494 – TOOL, MANUAL, HYDRAULIC, FOR CRIMPING ELECTRIC WIRE TERMINALS
• MS25497 – INSTRUMENT, PILOT, FLIGHT, BASIC STANDARD ARRANGEMENT FOR HELICOPTERS (S/S BY MS-33572)
• MS27726 – INTEGRATED WIRE TERMINATION SYSTEM FOR USE ON ELECTRICAL COMPONENTS (S/S BY MIL-STD-1549)
• MS28112 – INSTRUMENT, BASIC STANDARD ARRANGEMENT FOR FIXED WING AIRCRAFT (NO S/S DOCUMENT)
• MS28911 – TURBINE ENGINE CONSTANT CURRENT STARTING SYSTEM WIRING DIAGRAM
• MS33533 – Tolerances - Seamless Corrosion-Resistant Steel Tubing Round
• MS33540 – SAFETY WIRING AND COTTER PINNING, GENERAL PRACTICES FOR (S/S BY NASM33540)
• MS33578 – RECESSES, CROSS, LOW TORQUE DRIVE, DIMENSIONS AND GAGE DIMENSIONS FOR (ASG) (USE MS 9006)
• MS33586 – METAL, DEFINITION OF AND PROTECTION FOR DISSIMILAR (USE MIL-STD-889)
• MS35057 – RESISTOR, FXD, NONWIRE WOUND (ACCURATE) (TYPE N15).
• MS35253 – SUPPORT RING
• MS35718 – CONNECTOR, RECEPTACLE (BNC) RFUG-1098/U