FSC-FACR: Facilities Engineering, Design Requirements
Documents
- ISO5598 – Fluid power systems and components - Vocabulary
- ISO5752 – Metal valves for use in flanged pipe systems - Face-to-face and centre-to-face dimensions
- ISO7005/2 – Pipe flanges - Part 1: Steel flanges for industrial and general service piping systems
- ISO7810 – Identification Cards Physical Characteristics
- ISO7811/1 – Identification cards — Recording technique — Part 3: Location of embossed characters on ID-1 cards
- ISO7811/2 – Cards, Identification - Recording Technique - Part 2: Magnetic Stripe - Low Coercivity
- ITU-BLUEBOOK – TELECOMMUNICATION POLICIES FOR THE AMERICAS (DATA COMMUNICATION OVER THE TELEPHONE NETWORK, SERIES V RECOMMENDATIONS (DDITT BLUE BOOK VOL. VIII FASCICLE VIII.1))
- ITU-V32BIS – A Duplex Modem Operating At Data Signalling Rates Of Up To 14 400 Bit/S For Use On The General Switched Telephone Network And On Leased Point-To-Point 2-Wire Telephone-Type Circuits
- ITU-V34 – A Modem Operating At Data Signalling Rates Of Up To 33 600 Bit/S For Use On The General Switched Telephone Network And On Leased Point-To-Point 2-Wire Telephone-Type Circuits
- ITU-V42 – Error-Correcting Procedures For DCES Using Asynchronous-To-Synchronous Conversion
- ITU-V42BIS – Data Compression Procedures For Data Circuit-Terminating Equipment (DCE) Using Error Correction Procedures
- MIL-BUL-34 – Engineering and Design Criteria for Navy Facilities (S/S by MIL-HDBK-1001/1)
- MIL-BUL-35 – Matrix of Guide Specifications for Facilities Construction - Federal and Private (No S/S Document)
- MIL-BUL-36 – U.S. Building Codes and Standards an Overview (No S/S Document)
- MIL-HDBK-1000/1 – Engineering and Design Criteria and Documentation for Navy Facilities (S/S by MIL-STD-3007)
- MIL-HDBK-1001/1 – Basic Architectural Requirements and Design Considerations
- MIL-HDBK-1001/2 – Materials and Building Components
- MIL-HDBK-1001/5 – Roofing and Waterproofing (S/S by MIL-STD-3007)
- MIL-HDBK-1002 – Timber Structures (See Notice 1 for Replacement Information)
- MIL-HDBK-1002/1 – Structural Engineering General Requirements (S/S by MIL-STD-3007)
- MIL-HDBK-1002/2 – Loads (S/S by MIL-STD-3007)
- MIL-HDBK-1002/3 – Structural Engineering - Steel Structures (See Notice 1 for Replacement Information)
- MIL-HDBK-1002/5 – Timber Structures (S/S by MIL-STD-3007)
- MIL-HDBK-1002/6 – Aluminum Structures, Composite Structures, Structural Plastics, and Fiber-Reinforced Composites (S/S by MIL-STD-3007)
- MIL-HDBK-1003/1 – Plumbing (S/S by MIL-STD-3007)
- MIL-HDBK-1003/11 – Diesel-Electric Generating Plants (S/S by MIL-STD-3007)
- MIL-HDBK-1003/12 – Boiler Controls (S/S by MIL-STD-3007)
- MIL-HDBK-1003/13 – Solar Heating of Buildings and Domestic Hot Water (S/S by MIL-STD-3007)
- MIL-HDBK-1003/17 – Industrial Ventilation System (S/S by MIL-STD-3007)
- MIL-HDBK-1003/19 – Design Procedures for Passive Solar Buildings (S/S by MIL-STD-3007)
- MIL-HDBK-1003/2 – Incinerators
- MIL-HDBK-1003/6 – Central Heating Plants (S/S by MIL-STD-3007)
- MIL-HDBK-1003/7 – Steam Power Plants - Fossil Fueled (S/S By MIL-STD-3007)
- MIL-HDBK-1003/8 – Exterior Distribution of Steam, High Temperature Water, Chilled Water, Natural Gas, and Compressed Air (S/S by MIL-STD-3007)
- MIL-HDBK-1004/1 – Electrical Engineering Preliminary Design Considerations (S/S by MIL-STD-3007)
- MIL-HDBK-1004/10 – Electrical Engineering Cathodic Protection (See Notice 1 for Replacement Information)
- MIL-HDBK-1004/2 – Power Distribution Systems (See Notice 2 for Replacement Information)
- MIL-HDBK-1004/3 – Switchgear and Relaying (See Notice 2 for Replacement Information)
- MIL-HDBK-1004/4 – Electrical Utilization Systems (See Notice 1 for Replacement Information)
- MIL-HDBK-1004/5 – 400-Hertz Medium-Voltage Conversion/Distribution and Low-Voltage Utilization Systems (S/S by MIL-STD-3007)
- MIL-HDBK-1004/6 – Lightning Protection (See Notice 1 for Replacement Information)
- MIL-HDBK-1004/7 – Wire Communication and Signal Systems (See Notice 1 for Replacement Information)
- MIL-HDBK-1005/13 – Hazardous Waste Storage Facilities (S/S by MIL-STD-3007)
- MIL-HDBK-1005/16 – Wastewater Treatment System Design Augmenting Handbook (See Notice 2 for Replacement Information)
- MIL-HDBK-1005/17 – Nondomestic Wastewater Control and Pretreatment Design Criteria (See Notice 1 for Replacement Information)
- MIL-HDBK-1005/2 – Hydrology (See Notice 2 for Replacement Information)
- MIL-HDBK-1005/3 – Drainage Systems (See Notice 2 for Replacement Information)
- MIL-HDBK-1005/6 – Trackage (S/S by MIL-STD-3007)
- MIL-HDBK-1005/7 – Water Supply Systems (See Notice 2 for Replacement Information)
- MIL-HDBK-1005/8 – Domestic Wastewater Control (See Notice 2 for Replacement Information)
- MIL-HDBK-1005/9 – Industrial and Oily Wastewater Control (S/S by MIL-STD-3007)
- MIL-HDBK-1006/1 – Policy and Procedures for Project Drawing and Specification Preparation (S/S by MIL-STD-3007)
- MIL-HDBK-1006/2 – Policy and Procedures for Guide Specification Preparation (S/S by MIL-STD-3007)
- MIL-HDBK-1006/3 – Policy and Procedures for Engineering and Design Criteria Manual Preparation (S/S by MIL-STD-3007 and UFC-1-300-01)
- MIL-HDBK-1006/4 – Policy and Procedures for Definitive and Standard Design and Standard Specification Preparation (S/S by MIL-STD-3007)
- MIL-HDBK-1007/3 – Soil Dynamics and Special Design Aspects (S/S by MIL-STD-3007)
- MIL-HDBK-1008 – Fire Protection for Facilities Engineering, Design and Construction (S/S by MIL-STD-3007)
- MIL-HDBK-1010 – Cost Engineering: Policy and Procedures (S/S by MIL-STD-3007)
- MIL-HDBK-1010/1 – Cost Engineering: Policy and Procedures (No S/S Document)
- MIL-HDBK-1010/2 – Cost Engineering: Historical Cost Data (No S/S Document)
- MIL-HDBK-1011/1 – Tropical Engineering (S/S by MIL-STD-3007)
- MIL-HDBK-1011/2 – Cooling Buildings by Natural Ventilation (S/S by MIL-STD-3007)
- MIL-HDBK-1012/1 – Electronic Facilities Engineering
- MIL-HDBK-1012/3 – Telecommunications Premises Distribution Planning, Design, and Estimating
- MIL-HDBK-1013/1 – Design Guidelines for Physical Security of Facilities
- MIL-HDBK-1013/10 – Design Guidelines for Security Fencing, Gates, Barriers, and Guard Facilities (See Notice 1 for Replacement Information)
- MIL-HDBK-1013/11 – Instruction for Planning and Design of High Security Magazine Door Construction Projects
- MIL-HDBK-1013/12 – Evaluation and Selection Analysis of Security Glazing for Protection Against Ballistic, Bomb, and Forced Entry Tactics
- MIL-HDBK-1013/14 – Selection and Application of Vehicle Barriers (See Notice 1 for Replacement Information)
- MIL-HDBK-1013/3 – Bolt-on Installation and Checkout Procedures for the High-Security Hast with or without Anti-Intrusion Bar Cover (No S/S Document)
- MIL-HDBK-1013/4 – Instruction for Design, Fabrication, and Construction/Installation of Secure Enclosures
- MIL-HDBK-1013/5 – Steel-Ply Wall Hardening Selection and Installation Guide
- MIL-HDBK-1013/7 – Security Hardware Installation, Operation, and Maintenance
- MIL-HDBK-1013/8 – Combination Locks
- MIL-HDBK-1015/1 – Electroplating Facilities
- MIL-HDBK-1015/2 – Chemical Engineering Electroplating Technical Synopsis
- MIL-HDBK-1021/1 – Airfield Geometric Design (S/S by MIL-STD-3007)
- MIL-HDBK-1021/2 – General Concepts for Airfield Pavement Design (S/S by MIL-STD-3007)
- MIL-HDBK-1021/4 – Rigid Pavement Design for Airfields (See Notice 3 for Replacement Information)
- MIL-HDBK-1021/6 – Airfield Pavement Design for Frost Conditions and Subsurface Drainage (See Notice 1 for Replacement Information)
- MIL-HDBK-1022 – Petroleum Fuel Facilities (See Notice 1 for Replacement Information)
- MIL-HDBK-1023/1 – Airfield Lighting (S/S by MIL-STD-3007)
- MIL-HDBK-1023/4 – Maintenance of Visual Air Navigation Facilities (S/S by MIL-STD-3007)
- MIL-HDBK-1024/1 – Aviation Operational and Support Facilities (See Notice 1 for Replacement Information)
- MIL-HDBK-1024/2 – Helium Plants and Storage (No S/S Document)
- MIL-HDBK-1024/3 – Oxyacetylene and Nitrogen and Breathing Oxygen Facilities
- MIL-HDBK-1025/1 – Piers and Wharves (S/S by MIL-STD-3007)
- MIL-HDBK-1025/10 – Safety of Electrical Transmission and Distribution Systems (S/S by MIL-STD-3007)
- MIL-HDBK-1025/2 – Dockside Utilities for Ship Service (S/S by MIL-STD-3007)
- MIL-HDBK-1025/3 – Cargo Handling Facilities (No S/S Document)
- MIL-HDBK-1025/4 – Seawalls, Bulkheads, and Quaywall (S/S by MIL-STD-3007)
- MIL-HDBK-1025/5 – Ferry Terminals and Small Craft Berthing Facilities (No S/S Document)
- MIL-HDBK-1025/6 – General Criteria for Waterfront Construction (S/S by MIL-STD-3007)
- MIL-HDBK-1027/1 – Firefighting School Facilities (S/S by MIL-STD-3007)
- MIL-HDBK-1027/3 – Range Facilities and Miscellaneous Training Facilities other than Buildings
- MIL-HDBK-1027/4 – Aviation Training Facilities (See Notice 1 for Replacement Information)
- MIL-HDBK-1028/1 – Aircraft Maintenance Facilities (See Notice 1 for Replacement Information)
- MIL-HDBK-1028/3 – Maintenance Facilities for Ammunition, Explosives, and Toxins (see Notice 1 for Replacement Information)
- MIL-HDBK-1028/5 – Environmental Control - Design of Clean Rooms (See Notice 1 for Replacement Information)
- MIL-HDBK-1028/6 – Aircraft Fixed Point Utility Systems (See Notice 1 for Replacement Information)