FSC-FACR: Facilities Engineering, Design Requirements

Documents

• ARI500 – Air-Conditioners and Heat Pump Applications, Units for, Variable Capacity Positive Displacement Refrigerant Compressors and Compressor (S/S by AHRI-540)
• ARI510 – Ammonia Compressor Units (S/S by AHRI-510)
• ARI620 – Humidifiers for Residential Applications, Self-Contained (S/S by AHRI-620)
• ARI700 – Specification for Fluorocarbons Refrigerants (S/S by AHRI-700)
• ARI720 – Refrigerant Access Valves and Hose Connectors (No S/S Document)
• ARI740 – Refrigerant Recovery/Recycling Equipment (S/S by AHRI-740)
• ARI750 – Valves, Expansion, Thermostatic Refrigerant (S/S by AHRI-750)
• ARI760 – Solenoid Valves for use with Volatile Refrigerants (S/S by AHRI-760)
• ARI850 – Filter Equipment, Air, Commercial and Industrial (S/S by AHRI-850)
• ARI-DCAACP – Directory of Certified Applied Air-Conditioning Products (See Notice of Withdrawal for Replacement Information)
• ARI-DCUP – Directory of Certified Unitary Products (See Notice of Withdrawal for Replacement Information)
• ARI-GUIDELINE-D – Application and Installation of Central Station Air-Handling Units (No S/S Document)
• ARI-GUIDELINE-F – Humidifiers, Selection, Installation, and Servicing of Residential (S/S by AHRI-GUIDELINE-F)
• ARI-GUIDELINE-K – Containers for Recovered Fluorocarbon Refrigerants (S/S by AHRI-GUIDELINE-K)
• ASCE2 – Oxygen Transfer in Clean Water, Measurement of
• ASCE25 – Earthquake-Actuated Automatic Gas Shutoff Devices
• ASCE7 – Minimum Design Loads and Associated Criteria for Buildings and Other Structures, Includes Supplements 1 and 2 (2023
• ASCE-REPORT-NO13 – Sewage Treatment Plants, Filtering Materials for (No S/S Document)
• ASHRAE90.1 – Energy Standard for Sites and Buildings Except Low-Rise Residential Buildings (ANSI Approved; IES Co-sponsored)
• ASME-A112.1.2 – Air Gaps in Plumbing Systems (For Plumbing Fixtures and Water-Connected Receptors)
• ASME-A112.6.3 – Floor And French Drains
• ASME-A17.2.1 – CHECKLIST FOR INSPECTION AND TEST OF ELECTRIC ELEVATORS
• ASME-A17.2.2 – CHECKLIST FOR INSPECTION OF HYDRAULIC ELEVATORS
• ASME-B16.12 – Cast Iron Threaded Drainage Fittings
• ASME-B16.18 – Cast Copper Alloy Solder Joint Pressure Fittings
• ASME-B16.26 – CAST COPPER ALLOY FITTINGS FOR FLARED COPPER TUBES
• ASME-B16.28 – Wrought Steel Buttwelding Short Radius Elbows and Returns (No S/S Document)
• ASME-B16.33 – Manually Operated Metallic Gas Valves for Use in Gas Piping Systems Up to 175 psi (Sizes NPS ½ Through NPS 2)
• ASME-B16.34 – Valves, Flanged, Threaded, and Welding End
• ASME-B16.36 – Flanges, Orifice
• ASME-B16.38 – Large Metallic Valves for Gas Distribution - Manually Operated, NPS 2½ (DN 65) to NPS 12 (DN 300), 125 psig (8.6 bar) Maximum
• ASME-B16.40 – Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems
• ASME-B16.42 – Ductile Iron Pipe Flanges and Flanged Fittings, Classes 150 and 300
• ASME-B18.2.3.7M – BOLTS, METRIC HEAVY HEX STRUCTURAL
• ASME-B18.2.3.8M – BOLTS, METRIC HEAVY HEX STRUCTURAL
• ASME-B18.2.4.1M – Hex Nuts, Style 1, Metric (See Notice of Withdrawal for Replacement Information)
• ASME-B18.2.4.6M – HEX NUTS, METRIC
• ASME-B18.6.1 – Wood Screws (Inch Series)
• ASME-B18.6.4 – Thread Forming and Thread Cutting Tapping Screws and Metallic Drive, Screws, Inch Series (S/S by ASME-B18.6.3)
• ASME-B19.3 – Safety Standard for Compressors for Process Industries (No S/S Document)
• ASME-B20.1 – Conveyors and Related Equipment, Safety Standard for
• ASME-B30.17 – Cranes and Monorails (With Underhung Trolley or Bridge)
• ASME-B30.2 – Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)
• ASME-B30.22 – Cranes, Boom, Articulating
• ASME-B30.5 – Cranes, Mobile and Locomotive
• ASME-B30.8 – Cranes, Floating, and Floating Derricks
• ASME-B31.2 – Fuel Gas Piping (No S/S Document)
• ASME-B31.3 – Process Piping, Includes Errata 1 (2023) and Errata 2 (2023)
• ASME-B31.8 – Gas Transmission and Distribution Piping Systems
• ASME-B31.9 – Building Services Piping
• ASME-B36.19M – PIPE, STAINLESS STEEL
• ASME-B40.100 – Gauges and Gauge Attachments, Pressure
• ASME-B46.1 – Surface Texture, (Surface Roughness, Waviness and Lay)
• ASSE1002 – Anti-Siphon Fill Valves For Water Closet Tanks
• ASSE1003 – Water Pressure Reducing Valves For Potable Water Distribution Systems
• ASSE1005 – Water Heater Drain Valves (No S/S Document)
• ASSE1006 – Residential Use Dishwashers
• ASSE1011 – Performance Requirements for Backflow Prevention Requirements for Commercial Dishwashing Machines
• ASSE1012 – Backflow Preventer with Intermediate Atmospheric Vent
• ASSE1013 – Reduced Pressure Principle Backflow Preventers and Reduced Pressure Fire Protection Principle Backflow Preventers
• ASSE1014 – Hand-Held Showers
• ASSE1015 – Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies
• ASSE1017 – Temperature Actuated Mixing Valves for Hot Water Distribution Systems
• ASSE1018 – Trap Seal Primer Valves Potable, Water Supplied
• ASSE6010 – Medical Gas Systems Installers, Professional Qualification Standard for
• ASSE6030 – Medical Gas Systems Verifiers, Professional Qualification Standard for
• ASSE-SERIES5000 – Series 5000 - Backflow Prevention Assemblies - Standards Program
• ASTM-C273 – Core Materials, Shear Properties of Sandwich
• ASTM-C365 – Cores, Sandwich, Flatwise Compressive Properties of
• ASTM-C481 – Constructions, Sandwich, Laboratory Aging of
• ASTM-D1143 – PILES UNDER STATIC AXIAL COMPRESSIVE LOAD, STANDARD TEST METHOD FOR
• ASTM-D1329 – Rubber Property Evaluating Retraction at Low Temperature (TR Test)
• ASTM-D2434 – Soils, (Constant Head), Granular, Permeability of (No S/S Document)
• ASTM-E119 – Fire Test of Building Construction and Materials
• ASTM-E136 – Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C
• ASTM-E152 – Door Assemblies, Fire Test of, Standard Methods of (No S/S Document)
• ASTM-E154 – Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
• ASTM-E413 – Rating Sound Insulation
• ASTM-E424 – Sheet Materials, Solar Energy Transmittance and Reflectance (Terrestrial) of
• ASTM-E577 – Building Parts and Systems, Rectilinear, Coordination of (No S/S Document)
• ASTM-E621 – Metric (SI) Units in Building Design and Construction (Committee E-6 Supplement to E 380) (No S/S Document)
• ASTM-E713 – Scales for Metric Building Drawings, Selection of (No S/S Document)
• ASTM-E72 – Panels For Building Construction, Conducting Strength Tests Of
• ASTM-E814 – Fire Tests of Penetration Firestop Systems
• ASTM-E822 – Covers, Solar Collector, to Hail by Impact with Propelled Ice Balls, Determining Resistance of
• ASTM-E835-E835M – Clay and Concrete Masonry Units, Modular Coordination of (No S/S Document)
• AWS-D1.2A – Aluminum, Commentary on Structural Welding Code (No S/S Document)
• BHMA-A115 – Steel Preparation Standards (No S/S Document)
• BHMA-A115.1 – Steel Doors Standard and Steel Frames for Series 1000 Mortise Locks and Latches, Preparation of 1-3/8 and 1-3/4 (No S/S Document)
• BSI4994 – Vessels and Tanks in Reinforced Plastics, Design and Construction of (No S/S Document)
• CSI-MP2.1 – Masterformat, Master List of Numbers and Titles for the Construction Industry (No S/S Document)
• CSI-MP2.2 – Construction Specification Sections, A Recommended Format for (No S/S Document)
• CSI-MP2.3 – Construction Specifications, A Recommended Page Format for (No S/S Document)
• CSI-MP2.4 – Uniformat - A Uniform Classification of Construction Systems and Assemblies (No S/S Document)
• CTI-STD103 – REDWOOD LUMBER SPECIFICATIONS
• CTI-STD111 – GEAR SPEED REDUCERS
• CTI-STD112 – Pressure Preservative Treatment of Lumber
• CTI-STD114 – Design of Cooling Towers With Douglas Fir Lumber
• CTI-STD134 – Plywood for Use in Cooling Towers
• CTI-STD137 – Fiberglass Pultruded Structural Products for Use in Cooling Towers