FSC-8030: Preservative and Sealing Compounds– Page 5

QPL-19565 – Coating Compound, Thermal Insulation, Fire-and Water-Resistant, Vapor-Barrier (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)

QPL-19653 – SEALING COMPOUND (WOOD BEDDING) FORTIFIED (NO S/S DOCUMENT)

QPL-21066 – COATING SYSTEM, POLYVINYL CHLORIDE-PLASTICIZER DISPERSION (PLASTISOL)

QPL-21067 – COATING COMPOUND, SYNTHETIC RUBBER, EXPOSED STEEL SURFACES

QPL-21595 – TAPE, PRESSURE SENSITIVE ADHESIVE, PAPER, MASKING, NON-STAINING

QPL-23112 – Corrosion Preventive, Fire Resistant (See Notice 1 for Replacement Information)

QPL-23142 – TAPE, PRESSURE-SENSITIVE ADHESIVE, FOR DISSIMILAR METAL SEPARATION (NO S/S DOCUMENT)

QPL-23498 – SEALING COMPOUND BEARING PRESERVATION SYNTHETIC RUBBER BASE (NO S/S DOCUMENT)

QPL-23586 – Sealing Compound, (With Accelerator), Silicone Rubber, Electrical (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)

QPL-24176 – Cement, Epoxy, Metal Repair and Hull Smoothing (Metric) (Replaced by the Qualified Products Database (QPD) See Notice 1 for Additional Information)

QPL-24205 – CALKINK COMPOUND, MODIFIED EPOXY BASE, WOODEN DECK SEAM APPLICATION

QPL-24340 – Sealing Compound, Deck, Polyurethane (Polyether Base) (No S/S Document)

QPL-25506 – RESIN, SILICONE, LOW-PRESSURE LAMINATING (NO S/S DOCUMENT)

QPL-27315 – Coating Systems, Elastomeric, Thermally Reflective and Rain Erosion Resistant (See Notice 1 for Replacement Information)

QPL-27725 – COATING, CORROSION PREVENTIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS (USERS MAY REFER TO PRI-QPL-AMS-C-27725)

QPL-2912 – SYNTHETIC RUBBER COMPOUND, ACID AND OIL RESISTANT (FOR LINING BATTERY COMPARTMENTS ON SUBMARINES)

QPL-3105 – Sealing Compound, Inert (For Use in Ammunition) (No S/S Document)

QPL-3254 – COATING&SYSTEM, BRIDGING, STRIPPABLE SPRAYABLE

QPL-3301 – Compound, Asphaltic, Hot-Melt (Cavity Lining) (No S/S Document)

QPL-3927 – THREAD SEALING COMPOSITION, ROOM TEMPERATURE POLYMERIZING

QPL-40084 – CORROSION PREVENTIVE COMPOUND, WATER-EMULSIFIABLE, OIL TYPE (NO S/S DOCUMENT)

QPL-4383 – SEALING COMPOUND, TOPCOAT, FUEL TANK, BUNA-N TYPE (S/S BY QPL-AMS-S-4383)

QPL-450 – Coating Compound, Bituminous Solvent Type, Black (For Ammunition) (No S/S Document)

QPL-45021 – PLASTIC COATING COMPOUND, STRIPPABLE, COLD DIPPING 120 DEG., F. (49 DEG. C)

QPL-5542 – THREAD COMPOUND, ANTI SEIZE OXYGEN SYSTEM (NO S/S DOCUMENT)

QPL-62218 – CORROSION PREVENTIVE COMPOUNDS, COLD-APPLICATION (FOR NEW AND FIELDED MOTOR VEHICLES AND TRAILERS) (NO S/S DOCUMENT)

QPL-6799 – Coatings, Sprayable, Stripple, Protective Water Emulsion (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)

QPL-6869 – IMPREGNANTS FOR ALUMINUM ALLOY AND MAGNESIUM ALLOY CASTINGS

QPL-7124 – SEALING COMPOUND, POLYSULFIDE, ACCELERATOR REQUIRED, FOR AIRCRAFT STRUCTURES (NO S/S DOCUMENT)

QPL-7126 – SEALING COMPOUND, SYNTHETIC GLASS

QPL-7439 – COATING SYSTEM, ELASTOMERIC, RAIN EROSION RESISTANT AND RAIN EROSION RESISTANT WITH ANTI-STATIC TREATMENT, FOR EXTERIOR AIRCRAFT AND MISSILE PLASTIC PARTS (NO S/S DOCUMENT)

QPL-7502 – SEALING COMPOUND, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES HIGH ADHESION, ACCELERATOR REQUIRED

QPL-7916 – SEALING COMPOUND, THREAD AND GASKET, FUEL, OIL AND WATER RESISTANT

QPL-8045 – PLASTIC, SELF-SEALING TANK BACKING MATERIAL

QPL-8067 – LEATHER DRESSING, FUNGUS-PREVENTATIVE

QPL-81287 – TAPE, PRESSURE-SENSITIVE ADHESIVE, ALUMINUM FOIL BACKED, FOR HIGH TEMPERATURE APPLICATION (NO S/S DOCUMENT)

QPL-81309 – Corrosion Preventive Compounds, Water Displacing, Ultra-Thin Film (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)

QPL-8141 – STRIPPABLE PLASTIC COATING, SPRAYABLE

QPL-81732 – SEALING COMPOUND, ELECTRICAL, HIGH STRENGTH, ACCELERATOR REQUIRED (NO S/S DOCUMENT)

QPL-81733 – Sealing and Coating Compound, Corrosion Inhibitive (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)

QPL-81904 – Coating Compound, Thermal Insulation, Ablative (Replaced by the Qualified Products Database (QPD) See Notice 1 for Additional Information)

QPL-82604 – Compound, Asphaltic, High Melting Hot-Melt (Cavity Lining) (No S/S Document)

QPL-82633 – Compound, Polymeric Elastomer, Thermosetting (For Use as Bomb Tail Pad) (No S/S Document)

QPL-83315 – SEALING COMPOUND, ALUMINUM STRUCTURE, PRESSURE AND WEATHER SEALING, LOW DENSITY (NO S/S DOCUMENT)

QPL-83318 – SEALING COMPOUND, LOW TEMPERATURE CURING, QUICK REPAIR, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES (NO S/S DOCUMENT)

QPL-83430 – SEALING COMPOUND, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, INTERMITTENT USE TO 360 DEG. F (182 DEG. C) (S/S BY QPL-AMS-3276)

QPL-83455 – POTTING COMPOUND, TWO COMPONENT, RTV, FLUOROSILICONE (NO S/S DOCUMENT)

QPL-83982 – COMPOUND, SEALING, FLUID RESISTANT (NO S/S DOCUMENT)

QPL-8516 – Sealing Compound, Synthetic Rubber, Electric Connectors and Electric Systems, Chemically Cured (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)

QPL-85334 – Sealing Compound, Non-Curling, Low Consistency, Silicone, Groove Injection, for Integral Fuel Tanks (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)

QPL-8784 – SEALING COMPOUND, ALUMINUM INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, LOW ADHESION, ACCELERATOR REQUIRED

QPL-8802 – SEALING COMPOUND, TEMPERATURE-RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, HIGH-ADHESION (NO S/S DOCUMENT)

QPL-9063 – DESEALANT, INTEGRAL FUEL AND OIL TANKS (NO S/S DOCUMENT)

QPL-907 – Antiseize Thread Compound, High Temperature (Replaced by the Qualified Products Database (QPD) See Notice 1 for Additional Information)

QPL-9118 – FINISH, FOR GLASS FABRIC

QPL-AMS3276 – SEALING COMPOUND, INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEG. F (182 DEG. C) (USERS MAY REFER TO PRI-QPL-AMS3276)

QPL-AMS3277 – SEALING COMPOUND, POLYTHIOETHER INTEGRAL FUEL TANKS AND GENERAL PURPOSE, FAST CURING INTERMITTENT USE TO 360 DEG. F (182 DEG. C) (USERS MAY REFER TO PRI-QPL-AMS3277)

QPL-AMS3281 – SEALING COMPOUND, POLYSULFIDE (T) SYNTHETIC RUBBER FOR INTEGRAL FUEL TANK AND FUEL CELL CAVITIES LOW DENSITY (1.35 SP GR MAX), FOR INTERMITTENT USE TO 360 DEG. F (182 DEG. C) (USERS MAY REFER TO PRI-QPL-AMS3281)

QPL-AMS-S-4383 – Sealing Compound, Topcoat, Fuel Tank, Buna-N-Type (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)

QPL-AMS-S-7124 – Sealing Compound, Polysulfide, Accelerator Required, for Aircraft Structures

QPL-TT-C-520 – COATING COMPOUND, BITUMINOUS, SOLVENT TYPE, UNDERBODY (FOR MOTOR VEHICLES)

QPL-TT-C-530 – COATING COMPOUND, RUST INHIBITIVE, FISH OIL BASE (NO S/S DOCUMENT)

QPL-TT-P-595 – PRESERVATIVE COATING, CANVAS (NO S/S DOCUMENT)

QQ-C-100 – CEMENT, IRON AND STEEL

R-T-111 – Tar, for Joint Filler

SAE-AIR4069 – Fuel Tanks, Sealing Integral

SAE-AMS2518 – Thread Compound, Anti-Seize, Graphite-Pertolatum

SAE-AMS2535 – Microcircuits Coating, Vapor Deposited Poly-Monochloro-Para-Xylylene for

SAE-AMS3100 – Adhesion Promoter for Polysulfide Sealing Compounds

SAE-AMS3136 – COATING MATERIAL, PHENOLIC RESIN, PTFE FILLED PIGMENTED, 150 DEG. C (302 DEG. F) CURE

SAE-AMS3269 – Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities High Strength, for Intermittent Use to 360 Deg. F (182 Deg. C)

SAE-AMS3276 – Sealing Compound, Integral Fuel Tanks and General Purpose, Intermittent Use to 360 Deg. F (182 Deg. C)

SAE-AMS3277 – Sealing Compound, Polythioether Rubber, Fast Curing Integral Fuel Tanks and General Purpose, Intermittent Use to 400 Mdf (204Mdc)

SAE-AMS3281 – Sealing Compound, Polysulfide (T) Synthetic Rubber For Integral Fuel Tank and Fuel Cell Cavities Low Density (1.20 to 1.35 sp gr), for Intermittent Use to 360 Deg. F (182 Deg.C)

SAE-AMS3284 – Sealing Compound, Low Adhesion, for Removable Panels and Fuel Tank Inspection Plates

SAE-AMS3374 – Sealing Compound Aircraft Firewall

SAE-AMS3381 – Sealing Compound, Aircraft Firewall, Non-Silicone

SAE-AMS5791 – Cobalt Alloy, Powder, Plasma Spray 56.5CO - 25.5CR - 10.5NI - 7.5W

SAE-AMS5793 – Powder, Plasma Spray 95NI - 5AL

SAE-AMS-C-27725 – COATING, CORROSION PREVENTATIVE, POLYURETHANE FOR AIRCRAFT INTEGRAL FUEL TANKS FOR USE TO 250 DEG. F. (121 DEG. C.)

SAE-AMS-S-4383 – Sealing Compound, Topcoat, Fuel Tank, Buna-N Type

SAE-AMS-S-7124 – Sealing Compound, Polysulfide, Accelerator Required, for Aircraft Structures

SAE-AMS-S-7916 – Compound, Sealing, Thread and Gasket, Fuel, Oil, and Water Resistant (No S/S Document)

SAE-AMS-S-83318 – Sealing Compound, Polysulfide Type, Low Temperature Curing, Quick Repair, Integral Fuel Tanks and Fuel Cell Cavities

SAE-AMS-S-8802 – Sealing Compound, Temperature Resistant, Integral Fuel Tanks and Fuel Cell Cavities, High Adhesion

SAE-ARP1511 – CORROSION OF LOW-EMBRITTLING CADMIUM PLATE BY AIRCRAFT MAINTENANCE (S/S BY ASTM-F1111)

SS-C-560 – COATING-MATERIAL, FATTY ACID PITCH BASE, (NONBLEEDING) BRUSHING AND SPRAYING CONSISTENCY (FOR FOUNDATIONS, ROOFS, WALLS, ETC.) (NO S/S DOCUMENT)

SS-C-608 – COMPOUNDS, JOINTING, SULFUR (FOR BELL-AND-SPIGOT CAST-IRON PIPE)

SS-P-680 – Priming-Material, Fatty Acid Pitch Base, Brushing and Spraying Consistency(for Concrete, Masonry, and Other Mineral Surfaces) (No S/S Document)

SS-S-001416 – SEALING COMPOUND, ASPHALT AND CONCRETE SURFACES

SS-S-1401 – Sealant, Joint, Non-Jet-Fuel-Resistant, Hot-Applied, for Portland Cement and Asphalt Concrete Pavements (No S/S Documents)

SS-S-156 – SEALER, COLD APPLICATION, EMULSION TYPE, FOR JOINTS IN CONCRETE (USE SS-S-200)

SS-S-158 – SEALING COMPOUND, COLD-APPLICATION READY-MIXED LIQUEFIER TYPE, FOR JOINTS IN CONCRETE (USE SS-S-156)

SS-S-159 – SEALING COMPOUND, COLD-APPLICATION MASTIC MULTIPLE COMPONENT TYPE-FOR JOINTS IN CONCRETE