FSC-5330: Packing and Gasket Materials

Documents

• MS9956 – PACKING, PREFORMED - AMS 3668, SEAL (S/S BY SAE-AS9956)
• MS9966 – PACKING, PREFORMED - AMS 7273 SEAL (S/S BY SAE-AS9966)
• MS9967 – PACKING, PREFORMED - AMS 1273, ,O, RING (S/S BY SAE-AS9967)
• MS9970 – PACKING, PREFORMED - AMS 7279, O RING (S/S BY SAE-AS3581)
• NAS1412 – Gasket, Sealing, Custom Design
• NAS1523 – Packing With Retainer
• NAS1613 – PACKING, PREFORMED, ETHYLENE PROPYLENE RUBBER, SEAL ELEMENT
• NAS617 – Packing, Performed, Straight Thread Tube Fitting Boss, Synthetic Lubricant Resistant
• QPL-15342 – Gaskets, Metallic, Spiral Wound, for Boilers (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-16265 – GASKET, METALLIC-ASBESTOS, SPIRAL-WOUND (FOR NAVY FLANGED JOINTS IN PIPING SYSTEMS)
• QPL-16374 – PACKING MATERIAL (METAL COVERED FOR STERN TUBES)
• QPL-16685 – PACKING, PREFORMED (STUFFING-TUBE FOR ELECTRIC CABLES-SHIPBOARD USE) (NO S/S DOCUMENT)
• QPL-17303 – Packing Materials, Plastic Metallic and Plastic Nonmetallic (No S/S Document)
• QPL-17349 – PACKING MATERIAL, ROD, HIGH-PRESSURE, ASBESTOS
• QPL-17350 – PACKING MATERIAL, SEMIMETALLIC (SYMBOL 1400)
• QPL-17416 – Packing Material, Metallic, Flexible, Symbol 1430
• QPL-17472 – ASBESTOS SHEET, COMPRESSED (GASKET MATERIAL) (NO S/S DOCUMENT)
• QPL-18469 – PACKING, ASBESTOS, WATER JACKET
• QPL-18586 – GASKETS, 0-RING, SHIPBOARD ELECTRICAL JUNCTION BOX
• QPL-19152 – PACKINGS, HYDRAULIC, HIGH PRESSURE (FOR HYDROPNEUMATIC COUNTER-RECOIL SYSTEMS OF GUN MOUNTS)
• QPL-20084 – PACKING, RAMIE-FIBER (SYMBOL 1290)
• QPL-20241 – GASKET MATERIAL, WOOL FELT, IMPREGNATED ADHESIVE, PRESSURE-SENSITIVE (NO S/S DOCUMENT)
• QPL-21032 – GASKETS, METALLIC-ASBESTOS, SPIRAL WOUND (FOR ASA COMMERCIAL FLANGED JOINTS IN PIPING SYSTEMS)
• QPL-21099 – PACKING ASSEMBLIES, HYDRAULIC CONICAL AND V TYPES FIRE RESISTANT TYPE HYDRAULIC FLUIDS (NO S/S DOCUMENT)
• QPL-21569 – GASKET, CYLINDER LINER SEAL O-RING, SYNTHETIC RUBBER
• QPL-21610 – GASKET, HEAT EXCHANGER, VARIOUS CROSS SECTION RING, SYNTHETIC RUBBER (NO S/S DOCUMENT)
• QPL-24102 – GASKET AND PACKING MATERIAL, RUBBER, RESISTANT TO PETROLEUM-BASE LUBRICANTS, FOR USE IN AIR SYSTEMS UP TO 6,000 PSIG PRESSURE
• QPL-24696 – Gasket, Sheet, Non-Asbestos (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-24790 – Packing Material, Braided, Non-Asbestos (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-25732 – Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Limited Service at 275 Deg. F (135 Deg C) (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-25897 – RUBBER, HIGH TEMPERATURE, FLUID RESISTANT
• QPL-25988 – Rubber, Fluorosilicone Elastomer, Oil -, Hydraulic Fluid-, and Fuel-Resistant, Sheets, Strips, Molded Parts, and Extruded Shapes
• QPL-2765 – RUBBER SHEET, STRIP, EXTRUDED, AND MOLDED SHAPES, SYNTHETIC, OIL RESISTANT
• QPL-2863 – Packing, Preformed, Condenser-Tube, Non-Asbestos (Replaced by the Qualified Products Database (QPD) See Notice 1 for Additional Information)
• QPL-2911 – PACKING ASSEMBLY, HYDRAULIC CONICAL AND V TYPES (NO S/S DOCUMENT)
• QPL-32187 – Gasket, Hybrid, Flat and Raised Face Flange, Fire Resistant, Shipboard Use (Replaced by the Qualified Products Database (QPD) see Notice 2 for Additional Information)
• QPL-32287 – Packing, Preformed, Petroleum Hydraulic Fluid Resistant (Replaced by the Qualified Products Database (QPD) see Notice 2 for Additional Information)
• QPL-3533 – RUBBER, SYNTHETIC, SHEET, STRIP AND MOLDED
• QPL-432 – WASHERS, NONMETALLIC, DRUM PLUG, SYNTHETIC RUBBER
• QPL-45005 – SEAL, PLAIN AND SEAL, PLAIN, ENCASED: FLUID, RADIAL, SINGLE AND MULTIPLE LIP SEALING MEMBER, SPRING LOADED (NO S/S DOCUMENT)
• QPL-5049 – Ring, Wiper, Piston Rod (Replaced by the Qualified Products Database (QPD) See Notice 1 for Additional Information)
• QPL-5315 – PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT (NO S/S DOCUMENT)
• QPL-534 – PACKING, COIL-FORM, STUFFING-TUBE AND TERMINAL-TUBE (FOR ELECTRIC CABLES)
• QPL-5510 – PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE I HYDRAULIC (-65 DEG. TO 160 DEG.F) (S/S BY QPL-AMS-P-5510)
• QPL-5516 – PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, 160 DEG. F (NO S/S DOCUMENT)
• QPL-5521 – Washer, Aircraft Hydraulic Packing Back-up (No S/S Document)
• QPL-6183 – GASKET AND SHEET CASKET MATERIAL SYNTHETIC RUBBER AND CORK COMPOSITION
• QPL-7021 – ASBESTOS SHEET, COMPRESSED, FOR FUEL, LUBRICANT, COOLANT, WATER, AND HIGH TEMPERATURE RESISTANT GASKETS
• QPL-83248 – Rubber, Fluorocarbon Elastomer, High Temperature, Fluid, and Compression Set Resistant (No S/S Document)
• QPL-83461 – PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, IMPROVED PERFORMANCE AT 275 DEG. F (135 DEG. C) (REFER TO PRI-QPL-AMS-83461-2)
• QPL-87175 – PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, PHOSPHONITRILIC FLOUROELASTOMER (NO S/S DOCUMENT)
• QPL-AMS-P-5510 – Packing, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 Degrees F to 160 Degrees F) (S/S by PRI-QPL-AMS-P-5510)
• QPL-HH-P-46 – Packing, Asbestos, Sheet, Compressed (No S/S Document)
• QQ-C-40 – CALKING, LEAD WOOL AND LEAD PIG
• QQ-L-156/(an interim revision also exists for this document number as QQ-L-00156A) – LEAD, CALKING (USE QQ-C-40)
• SAE-AMS3213 – Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 75-85 (No S/S Document)
• SAE-AMS3214 – Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 35-45 (No S/S Document)
• SAE-AMS3216 – Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 70 to 80
• SAE-AMS3217 – Test Slabs, Standard Elastomer Stocks
• SAE-AMS3217/1 – Test Slabs, Acrylonitrile Butadiene (NBR-H), Medium-High Acrylonitrile, 65 - 75
• SAE-AMS3217/2 – Test Slabs, Acrylonitrile Butadiene (NBR-L), Low Acrylonitrile, 65 - 75
• SAE-AMS3217/3 – Test Slabs, Chloroprene (CR) 70-80
• SAE-AMS3217/4 – Test Slabs, Fluoroelastomer (FKM), 65 - 75
• SAE-AMS3217/5 – Test Slabs, Fluorosilicone (FVMQ) 55 - 65
• SAE-AMS3217/6 – TEST SLABS, PHOSPHONITRILIC FLUOROELASTOMER (FZ) 65 - 75 (NO S/S DOCUMENT)
• SAE-AMS3218 – Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant, Low Compression, Set 85-95
• SAE-AMS3248 – ETHYLENE PROPYLENE (EPM) RUBBER PHOSPHATE ESTER RESISTANT 55 - 65
• SAE-AMS3249 – Ethylene Propylene, (EPDM)Rubber, Hydrazine-Base-Fluid Resistant 75-85
• SAE-AMS3251 – RUBBER AND CORK COMPOSITION, SYNTHETIC GENERAL PURPOSE MEDIUM
• SAE-AMS3252 – RUBBER AND CORK COMPOSITION, SYNTHETIC GENERAL PURPOSE, FIRM (NO S/S DOCUMENT)
• SAE-AMS3260 – Rubber, Ethylene-Propylene-Diene (EPDM) Rubber General Purpose 45-55
• SAE-AMS3274 – ACRYLONITRILE BUTADIENE (NBR) RUBBER SHEET AND MOLDED SHAPES NYLON CLOTH REINFORCED FUEL RESISTANT
• SAE-AMS3275 – Sheet, Acrylonitrile Butadiene (Nbr) Rubber, Non-Asbestos Fiber, Fuel And Oil Resistant
• SAE-AMS3307 – RUBBER, SILICONE (VQM) LOW COMPRESSION SET, NON-OIL-RESISTANT 65-75
• SAE-AMS3323 – Sponge, Fluorosilicone (FVM) Rubber Closed Cell  (No S/S Document)
• SAE-AMS3325 – Rubber, Fluorosilicone (FVMQ), Fuel and Oil Resistant 55 - 65
• SAE-AMS3327 – Fluorosilicone  (FVMQ) Rubber High Temperature Fuel and Oil Resistant  70-80  (No S/S Document)
• SAE-AMS3328 – Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 35-45 (No S/S Document)
• SAE-AMS3329 – Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant, High Strength 45-55  (No S/S Document)
• SAE-AMS3330 – Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 45-55  (No S/S Document)
• SAE-AMS3331 – Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 65-75 (No S/S Document)
• SAE-AMS3334 – SILICONE RUBBER EXTREME LOW-TEMPERATURE RESISTANT 35-45
• SAE-AMS3335 – Silicone Rubber Extreme Low-Temperature Resistant 45-55
• SAE-AMS3336 – SILICONE (PVMQ) RUBBER EXTREME-LOW-TEMPERATURE RESISTANT 55-65
• SAE-AMS3337 – SILICONE (PVQM) RUBBER EXTREME-LOW-TEMPERATURE RESISTANT 65-75
• SAE-AMS3338 – SILICONE (PVQM) RUBBER EXTREME-LOW-TEMPERATURE RESISTANT 75-85
• SAE-AMS3347 – RUBBER, SILICONE 1200 PSI (8.27 MPA) HIGH MODULUS 45-55
• SAE-AMS3348 – SILICONE (VQM) RUBBER 1150 PSI (7.93 MPA) TENSILE STRENGTH, HIGH RESILIENCY 25-35
• SAE-AMS3349 – SILICONE (VQM) RUBBER 1100 PSI (7.58 MPA) TENSILE STRENGTH, HIGH RESILIENCY 65-75
• SAE-AMS3357 – RUBBER, SILICONE (VQM) LUBRICATING OIL AND COMPRESSION SET RESISTANT 65-75
• SAE-AMS3382 – Tetrafluoroethylene/Propylene Rubber (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 75 to 90  (No S/S Document)
• SAE-AMS7255 – Rings, Sealing, Tetrafluoroethylene/Propylene Rubber (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 70 - 80 (No S/S Document)
• SAE-AMS7256 – Rings, Sealing, Tetrafluoroethylene/Propylene Rubber (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 85 - 95 (No S/S Document)
• SAE-AMS7257 – RINGS, SEALING, PERFLUOROCARBON (FFKM) RUBBER HIGH TEMPERATURE FLUID RESISTANT 70 - 80
• SAE-AMS7258 – Rings, Sealing, Butadiene-Acrylonitrile (NBR) Rubber Fuel Resistant, Low Shrinkage 65 - 75
• SAE-AMS7259 – Fluorocarbon (FKM) Rubber High Temperature/Fluid Resistant Low Compression Set/ 85 to 95 Hardness For Seals In Fuel Systems and Specific Engine Oil Systems
• SAE-AMS7260 – Rings, Butadiene-Acrylonitrile (NBR) Rubber, Molded Fuel and Low Temperature Resistant 70-80
• SAE-AMS7261 – RINGS, SEALING, PHOSPHONITRILIC (FZ) FLUOROELASTOMER HIGH-TEMPERATURE-FLUID RESISTANT (NO S/S DOCUMENT)
• SAE-AMS7261/1 – RINGS, SEALING, PHOSPHONITRILIC (FZ) FLUOROELASTOMER HIGH-TEMPERATURE-FLUID RESISTANT 65-75 (NO S/S DOCUMENT)
• SAE-AMS7261/2 – RINGS, SEALING, PHOSPHONITRILIC (FZ) FLUOROELASTOMER HIGH-TEMPERATURE-FLUID RESISTANT 75-85 (NO S/S DOCUMENT)