FSC-5330: Packing and Gasket Materials

Documents

• HH-G-156 – Gasket Material, General Purpose; Rubber Sheets, Strips, and Special Shapes
• HH-G-160 – Gasket, Rubber, Molded or Extruded, for Concrete Non-Pressure Sewer Pipe.
• HH-G-71 – GASKET, ASBESTOS-COPPER, CORRUGATED
• HH-G-76 – Gaskets, Asbestos Metalic Cloth (S/S by ASTM-F709)
• HH-P-00106/(the base document for this interim revision is HH-P-106C) – PACKING MATERIAL, FLAX OR HEMP (S/S BY MIL-P-24752)
• HH-P-00118 – Packing Material (Asbestos, Lubricated) (No S/S Document)
• HH-P-106/(an interim revision also exists for this document number as HH-P-00106D NOT 3) – Packing Material, Flax or Hemp (S/S by MIL-P-24752)
• HH-P-112 – Packing, Hydraulic
• HH-P-117 – Packing; Jute, Twisted
• HH-P-119 – Packing Material, Sewer Joint, Asphalt-Saturated Cellulose-Fiber (No S/S Document)
• HH-P-125 – Packing Material, Wick, Cotton, Round
• HH-P-126 – Packing Material, Metallic, Flexible
• HH-P-128 – Packing, Metallic, Flexible, Condenser-Tube
• HH-P-131 – Packing, Metallic and Nonmetallic, Plastic (No S/S Document)
• HH-P-151 – Packing; Rubber-Sheet, Cloth-Insert
• HH-P-166 – Packing Material, Semimetallic
• HH-P-171 – Packing, Spiral, Gland, Low-Pressure (No S/S Document)
• HH-P-31 – Packing Material, Nonasbestos, Fibrous Glass Metallic and Plain Cloth and Tape
• HH-P-34 – Packing, Asbestos, Rod, Braided
• HH-P-36 – PACKING MATERIAL, ASBESTOS, ROD, HIGH-PRESSURE
• HH-P-41 – Packing, Asbestos, Rope and Wick (S/S by MIL-P-70343)
• HH-P-46 – Packing: Asbestos, Sheet, Compressed (See Notice 2 for Replacement Information)
• HH-P-51 – PACKING, ASBESTOS, VALVE-STEM
• HH-P-61 – Packing; Diaphragm
• HH-P-71 – Packing, Fabric.Condenser-Tube
• HH-P-91 – Packing; Fiber, Hard, Sheet
• HH-P-96 – PAPER, GASKET: FIBER (ANIMAL OR PLANT), SHEET (S/S BY ASTM-F104)
• JAN-P-1116 – PROTECTOR, EDGE, PACKING CASE
• JAN-P-534 – Packing, Coil-Form, Stuffing-Tube and Terminal-Tube (for Electric Cables) (S/S by MIL-P-16685)
• MIL-A-17472 – Asbestos Sheet, Compressed (Gasket Material) (Use HH-P-46)
• MIL-A-24058 – Asbestos Packing and Gasketing Material, Impregnated
• MIL-A-7021 – Asbestos Sheet, Compressed, for Fuel, Lubricant, Coolant, Water and High Temperature Resistant Gaskets (See Notice 2 for Replacement Information)
• MIL-A-81264 – Asbestos Felt or Mat, Resin Impregnated
• MIL-C-269 – Cotton, Calking
• MIL-C-6183 – Cork and Rubber Composition Sheet, for Aromatic Fuel and Oil Resistant Gaskets (S/S by SAE-AMS-C-6183)
• MIL-DTL-16685 – Packing, Material and Packing Preformed (Stuffing Tube for Electric Cables)
• MIL-DTL-17416 – Packing Material, Metallic, Flexible, Symbol 1430
• MIL-DTL-20078 – Gasket, for Ballistic Doors and Hatches
• MIL-DTL-22050 – Gasket and Packing Material, Rubber, for use with Polar Fluids, Steam, and Air at Moderately High Temperatures
• MIL-DTL-24130/1 – Metallic Seal Rings, Non-Integral, Nickel-Chromium-Iron Alloy (UNS6600)
• MIL-DTL-24130/2 – Metallic Seal Rings, Non-Integral, Steel, Corrosion-Resistant (UNS S30400/S30403, S31600/S31603, S31703, S34700, and S34800)
• MIL-DTL-24130/3 – Metallic Seal Rings, Non-Integral, Nickel Copper Alloy (UNS N04400)
• MIL-DTL-24293 – Packing, Hydraulic, Leather, Cattlehide, Mineral-Tanned, Impregnated
• MIL-DTL-24583 – Packing Material, Graphitic or Carbon Braided Yarn
• MIL-DTL-24696 – Gasket, Sheet, Non-Asbestos
• MIL-DTL-24709 – Pads, Distributed Isolation Material, Type: R-50-21/64
• MIL-DTL-25988 – Rubber, Fluorosilicone Elastomer, Oil - and Fuel-Resistant, Sheets, Strips, Molded Parts, and Extruded Shapes
• MIL-DTL-32286 – Material, Ball Valve Seat Seal and Thrust Washer
• MIL-DTL-3533 – Rubber, Synthetic; Sheet, Strip and Molded
• MIL-DTL-432 – Gaskets, Nonmetallic, Synthetic Rubber
• MIL-DTL-46874 – Seal, RF and Pressure
• MIL-DTL-5516 – Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160 Degrees F (71 Degrees C)
• MIL-DTL-5521 – Washer, Aircraft Hydraulic Packing Back-Up
• MIL-DTL-81716 – Packing, Preformed, Straight Thread Tube Fitting Boss, Type II Hydraulic (-65 Degrees F to +275 Degrees F ) (No S/S Document)
• MIL-DTL-83397 – Rubber, Polyurethane, Castable, Humidity Resistant
• MIL-E-16090 – Cork-Composition, Gaskets and Sheets (use HH-C-576)
• MIL-F-13532 – Felt, Hair, Hard (for Blank Ammunition) (No S/S Document)
• MIL-F-81265 – Fiber, Asbestos (No S/S Document)
• MIL-G-0021032/(the base document for this interim revision is MIL-G-21032D NOT 2) – Gaskets, Metallic Asbestos, Spiral Wound (S/S By MIL-G-24716)
• MIL-G-1086 – Gasket Material, Synthetic Rubber (For Bolted Steel Tanks) (S/S By Mil-R-6855)
• MIL-G-11639 – Gaskets, Rubber for Cartridge Storage Cases, Smokeless Powder Boxes and Tanks (No S/S Document)
• MIL-G-12803 – Gasket Material, Non-Metallic (S/S by ASTM-F104)
• MIL-G-15342 – Gaskets, Metallic, Spiral Wound for Boilers
• MIL-G-16265 – Gaskets, Metallic-Flexible Graphite and Metallic-Asbestos, Spiral Wound (For Navy Flanged Joints in Piping Systems)
• MIL-G-16959 – Gaskets; Metallic, Boiler, Economizer and Superheater Handhole
• MIL-G-18586 – Gasket, O-Ring, Shipboard Electrical Junction Box (Use MIL-P-5516)
• MIL-G-20103 – Gaskets (For Box, Ammunition, Caliber .30, 719, and Box, Ammunition, Caliber .50,M2)
• MIL-G-20241 – Gasket Material, Wool Felt, Impregnated, Adhesive, Pressure-Sensitive (S/S By ZZ-R-765 and MIL-I-24391)
• MIL-G-21032/(an interim revision also exists for this document number as MIL-G-0021032E(2) NOT 1) – Gasket, Metallic Asbestos, Spiral Wound (S/S by MIL-G-24716 or ANSI-B16.20)
• MIL-G-21569 – Gaskets, Cylinder Liner Seal, Synthetic Rubber
• MIL-G-21610 – Gaskets, Heat Exchanger, Various Cross Section Rings, Synthetic Rubber
• MIL-G-23652 – Gasket and Packing Material Petroleum and Phosphate Ester Fluid Resistant (S/S by MIL-R-83248)
• MIL-G-23983 – Gasket and Packing Material, Oil Resistant Rubber, Access Hull Applications (No S/S Document)
• MIL-G-24102 – Gasket, Rubber, for Use in Air Systems up to 6,000 PSIG Pressure (use MIL-G-23652)
• MIL-G-24696/1 – Gasket, Sheet, Non-Asbestos, Sizes and Tolerances (S/S by MIL-DTL-24696)
• MIL-G-24716 – Gaskets, Metallic-Flexible Graphite, Spiral Wound
• MIL-G-24717 – Gasket, Sheet, Refrigeration, Non-Asbestos
• MIL-G-24748 – Gaskets, Metallic and Rubber, for Use in Union Pipe Fittings 1/4 to 2-Inch NPS with Various Fluids from -30 Degrees Fahrenheit (-34 Degrees Celsius) to 400 Degrees Fahrenheit (204 Degrees Celsius)
• MIL-G-29170 – Gaskets, Synthetic Rubber, Reinforced (for Drydock Caissons) (No S/S Document)
• MIL-G-3820 – Gasket, Synthetic Rubber, Reinforced (For Drydock Caissons) (No S/S Document)
• MIL-G-38426 – Gasket Material, Tetrafluoroethylene Resin, Glass-Filled, Cryogenic Application (No S/S Document)
• MIL-G-46873 – Gasketing, Metallic Mesh, Cylindrical (No S/S Document)
• MIL-G-46898 – Gasketing, RF and Pressure (No S/S Document)
• MIL-HDBK-212 – Gasket Materials (Nonmetallic)
• MIL-HDBK-692 – A Guide to the Selection of Rubber O-Rings
• MIL-J-2829 – Joint Sealing Packing (No S/S Document)
• MIL-L-13188 – Leather, Cattlehide, Chrome-Tanned: Hydraulic Packing (for Recoil Mechanisms) (No S/S Document)
• MIL-M-24130 – Metallic Seal Rings, Non-Integral General Specification for
• MIL-P-11501 – PACKINGS, GASKETS, & FILLERS, PREFORMED, RUBBER OR SYNTHETIC RUBBER (FOR RECOIL MECHANISM).
• MIL-P-11719 – Packing, Preformed, Pneumatic Hose Couplings, Universal (No S/S Document)
• MIL-P-1220 – PACKING MATERIAL, WICK, COTTON, ROUND
• MIL-P-1342 – PACKING MATERIAL (LEAD, SHREDDED) (NO S/S DOCUMENT)
• MIL-P-1384 – PACKING, SYNTHETIC-RUBBER, CLOTH-INSERTION (SYMBOL 2353) (USE HH-P-151)
• MIL-P-14574 – Packing (Wiper Ring), Synthetic Rubber, Cloth Insertion (No S/S Document)
• MIL-P-16332 – PACKING, FLAX, GRAPHITE-COATED, WATERPROOF, HYDRAULIC-COILS
• MIL-P-16374 – PACKING MATERIAL (METAL COVERED, FOR STERN TUBES) (USE MIL-P-24377)
• MIL-P-16404 – Packing, Asbestos (No S/S Document)
• MIL-P-16725 – PACKING MATERIAL (SPIRAL, LOW-PRESSURE, PLASTIC)
• MIL-P-17303 – Packing Materials, Plastic Metallic and Plastic Nonmetallic (See Notice 1 for Replacement Information)
• MIL-P-17349 – PACKING MATERIAL, ROD, HIGH PRESSURE, ASBESTOS (USE MIL-P-24377)