Federal Standard

Documents

• FED-STD-001031/(the base document for this interim revision is FED-STD-1031) – GENERAL PURPOSE 37-POSITION AND 9-POSITION INTERFACE BETWEEN DATA TERMINAL EQUIPMENT AND DATA CIRCUIT-TERMINATING EQUIPMENT (S/S BY FIPS PUB 143)
• FED-STD-001033 – Telecommunication, Digital Communication Performance Parameters
• FED-STD-00104 – CONSERVATION OF AUTOMOTIVE GASOLINE
• FED-STD-001041/(the base document for this interim revision is FED-STD-1041(1)) – INTERFACE BETWEEN DATA TERMINAL EQUIPMENT & DATA CIRCUIT-TERMINATINE EQUIPMENT FOR OPERATION WITH PACKET-SWITCHED DATA TELECOMMUNICATIONS NETWORKS (NO S/S DOCUMENT)
• FED-STD-00107 – MUCILAGE (USE MMM-M-792)
• FED-STD-00111 – STOOL, STRAIGHT AND STOOL, REVOLVING
• FED-STD-00116 – Mattress, Bed (Felted, Cotton) (No S/S Document)
• FED-STD-00117 – FEDERAL RATING AND TEST STANDARD FOR MOTOR VEHICLE PERFORMANCE BASED ON GRADE ABILITY
• FED-STD-00131/(the base document for this interim revision is FED-STD-131C NOT 2) – Diazotype Paper Sheet and Rool Sizes
• FED-STD-00133 – CONTINUOUS IDENTIFICATION MARKING OF IRON AND STEEL PRODUCTS,
• FED-STD-00136 – Flame-Spread Properties of Materials
• FED-STD-00139 – Battery, Storage, Lead-Acid, for Electric Operated Industrial Truck and Tractors (No S/S Document)
• FED-STD-00144 – PARTITION, OFFICE, STEEL
• FED-STD-00150 – SIZES OF ENVELOPES (CORRESPONDENCE ENVELOPE)
• FED-STD-00152 – Steel Bar, Hot Rolled (Including Bar Size Shapes)
• FED-STD-00160 – Rubber Products, Definitions and Terms for Visible Defects of (No S/S Document)
• FED-STD-00168 – Head Sizes for Dental Excavating Burs (No S/S Document)
• FED-STD-00169 – Pad, Gauze, Gauze and Cellulose or Regenerated Viscose Cellulose Fiber
• FED-STD-00177 – TRAY, PREPACKING (PAPERBOARD AND MOLDED PULP)
• FED-STD-00178 – TAB, INDEX, GUMMED
• FED-STD-00181 – FRAME, HAND, HACKSAW
• FED-STD-00186/(the base document for this interim revision is FED-STD-186 NOT 1) – MARKING OF VALVES, FITTINGS, FLANGES, AND UNIONS USED IN NUCLEAR REACTOR SYSTEMS (NO S/S DOCUMENT)
• FED-STD-00188 – RACK, WEARING APPAREL, STEEL (NO S/S DOCUMENT)
• FED-STD-00208 – OFFICE FURNITURE, STEEL, UNITIZED
• FED-STD-00210 – Road and Paving Materials, Method of Sampling and Testing
• FED-STD-00217 – Cord, Flexible, and Wire, Fixture, (Electrical 0-600-Volt Service)
• FED-STD-00249 – Light; Desk, Fluorescent, Pedestal (S/S by Fed-Std-262)
• FED-STD-00250 – Light, Desk, Incandescent, Flexible Column (S/S by Fed-Std- 262)
• FED-STD-00256 – FOLDER, FILE (SEE UU-F-1206)
• FED-STD-00281 – LABELING AND MARKING REQUIREMENTS FOR SHIPMENT AND SEGREGATED STORAGE OF FLAMMABLE LIQUIDS STOCKED BY GENERAL SERVICES ADMINISTRATION (S/S BY FED-STD 313)
• FED-STD-0059/(the base document for this interim revision is FED-STD-59 NOT 1) – SHEET, BED, COTTON (BLEACHED) (NO S/S DOCUMENT)
• FED-STD-1 – Standard for Laboratory Atmospheric Conditions for Testing (S/S by ASTM-E171)
• FED-STD-10 – Soap, Toilet, (Floating White)
• FED-STD-100 – CARDS, INDEX (USE UU-C-128)
• FED-STD-1001 – Telecommunications, Synchronous High Speed Data Signaling Rates Between Data Terminal Equipment and Data Communication Equipment
• FED-STD-1002 – Time and Frequency Reference Information in Telecommunication Systems
• FED-STD-1003 – Telecommunications, Synchronous Bit Orientated Data Link Control Procedures (Advanced Data Communication Control Procedures (No S/S Document)
• FED-STD-1005 – Telecommunications, Coding and Modulation Requirements for nondiversity 2400 Bit/Second Modems
• FED-STD-1006 – Telecommunication, Coding and Modulation Requirements for 4800 Bit/Second Modems
• FED-STD-1007 – Telecommunications, Coding and Modulation Requirements for Duplex 9600 Bit Second Modems (No S/S Document)
• FED-STD-1008 – Telecommunication, Coding and Modulation Requirements for Duplex 600 and 1200 Bit/Second Modems
• FED-STD-101 – TEST PROCEDURES FOR PACKAGING MATERIALS (CHANGE NOTICES 1 THRU 3 ARE INCORPORATED IN WITH REVISION C) (S/S BY MIL-STD-3010)
• FED-STD-1010 – Telecommunications, Bit Sequencing of the American National Standard Code for Information Interchange in Serial by Bit Data Transmission
• FED-STD-1011 – Telecommunication, Character Structure and Character Parity Sense for Serial by Bit Data Communication in the American National Standard Code for Information Interchange
• FED-STD-1012 – Telecommunications, Character Structure and Character Parity Sense for Parallel by Bit Data Communication in the American National Standard Code for Information Interchange
• FED-STD-1013 – Telecommunications, Synchronous Signaling Rates Between Data Terminal Equipment and Data Circuit Terminating Equipment Utilizing 4KHZ Circuits
• FED-STD-1015 – Telecommunications: Analog to Digital Conversion of Voice by 2,400 Bit/Second Linear Predictive Coding
• FED-STD-1016 – Telecommunications: Analog to Digital Conversion of Radio Voice by 4,800 Bit/Second Code Excited Linear Prediction (CELP)
• FED-STD-102 – PRESERVATION, PACKAGING, AND PACKING LEVELS (S/S BY MIL-P-116 AND MIL-STD-2073)
• FED-STD-1020 – Telecommunication, Electrical Characteristics of Balanced Voltage Digital Interface Circuits
• FED-STD-1023 – Telecommunications, Interoperability Requirements for Encrypted, Digitized Voice Utilized with 25 KHZ Channel FM Radios Operating Above 30 MHZ (No S/S Document)
• FED-STD-1026 – Interoperability and Security Requirements for Use of the Data Encryption Standard in the Physical Layer of Data Communications
• FED-STD-1027 – General Security Requirements for Equipment Using the Data Encryption Standard
• FED-STD-1028 – Telecommunications: Interoperability and Security Requirements for Use of the Data Encryption Standard with CCITT Group 3 Facsimile Equipment
• FED-STD-103 – CONSERVATION OF AUTOMOTIVE ENEINE OILS
• FED-STD-1030 – Telecommunication, Electrical Characteristics of Unbalanced Voltage Digital Interface Circuits
• FED-STD-1031/(an interim revision also exists for this document number as FED-STD-001031) – TELECOMMUNICATION, GENERAL PURPOSE 37 POSITION AND 9 POSITION INTERFACE BETWEEN DATA TERMINAL EQUIPMENT AND DATA CIRCUIT TERMINATING EQUIPMENT
• FED-STD-1035 – Telecommunications, Coding, Modulation and Transmission Requirements for Single Channel Medium and High Frequency Radiotelegraph Systems Used in Government Maritime Mobile Telecommunications
• FED-STD-1037 – Telecommunications: Glossary of Telecommunication Terms
• FED-STD-1041/(an interim revision also exists for this document number as FED-STD-001041 NOT 1) – Interface Between Data Terminal Equipment (DTE) and Data Circuit-Terminating Equipment (DCE) for Operation with Packet-Switched Data Communications Networks
• FED-STD-106 – Costumer, Wearing Apparel, Steel, (General Office)
• FED-STD-1061 – Telecommunications, Group 2 Facsimile Apparatus for Document Transmission
• FED-STD-1062 – Telecommunications, Group 3 Facsimile for Document Transmission (No S/S Document)
• FED-STD-1063 – PROCEDURES FOR DOCUMENT FACSIMILE TRANSMISSION (NO S/S DOCUMENT)
• FED-STD-108 – LABEL, PAPER, GUMMED (SEE UU-L-49)
• FED-STD-11 – Soap, Toilet (Cake, Milled)
• FED-STD-110 – CHAIR, STRAIGHT AND ROTARY, ALUMINUM, (GENERAL OFFICE)
• FED-STD-112 – STAND, OFFICE MACHINE, STEEL
• FED-STD-115 – STONES, SHARPENING (S/S BY SS-S-736 AND SS-S-736/1 THROUGH SS-S-736/11)
• FED-STD-119 – BELT, SEAT, PASSENGER TYPE, AUTOMOTIVE, METHODS OF INSTALLATION
• FED-STD-120 – SOAP, GRIT (HAND, PASTE, AND POWDER)
• FED-STD-122 – Automobiles: Sedans and Station Wagons Gasoline and Alternative Fuel Powered
• FED-STD-123 – Marking for Shipment (Civil Agencies)
• FED-STD-124 – COLOR OF PAINTED METAL GENERAL OFFICE FURNITURE
• FED-STD-125 – Film, Photographic and Film, Photographic, Processed: (For Permanent Record Use) (No S/S Document)
• FED-STD-126 – Cleaning Compound, Synthetic Detergent, (Non-Abrasive)
• FED-STD-128 – Junction Box, Extension, Junction Box, Cover, Junction Box, (Steel, Cadmium or Zinc Coated) ( No S/S Document)
• FED-STD-129 – Ballast, Lamp, Fluorescent
• FED-STD-13 – Soap, Toilet, Liquid and Paste
• FED-STD-131/(an interim revision also exists for this document number as FED-STD-00131E) – Diazotype Paper Sheet Sizes
• FED-STD-135 – Card, Guide, File, Pressboard and Card Set, Guide, File, Pressboard (S/S by UU-C-95)
• FED-STD-14 – Soap, Toilet (Powdered, Dispensers)
• FED-STD-140 – TABLETS (FOR MEDICINAL PURPOSES) (NO S/S DOCUMENT)
• FED-STD-141 – Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing
• FED-STD-142 – PARENTERAL PREPARATIONS (NO S/S DOCUMENT)
• FED-STD-143 – Spark Plug. Heat Rating of, Method of Classifying (S/S by SAE-J2162)
• FED-STD-145 – DESK, FLAT TOP, STEEL, CONFERENCE TYPE
• FED-STD-146 – TOLERANCES FOR COPPER AND COPPER BASE ALLOY MILL PRODUCTS (S/S BY SAE-MAM2221, SAE-AMS2221, SAE-MAM2222, SAE-AMS2222, SAE-MAM2223, SAE-AMS2223, SAE-MAM2224 AND SAE-AMS2224)
• FED-STD-147 – Tape, Pack,aging, Adhesive and Gummed, Methods of Inspection, Sampling, and Testing (No S/S Document)
• FED-STD-148 – Classification, Identification, and Testing of Feather Filling Material (S/S by ASTM-D4522)
• FED-STD-149 – Syringe, Luer, Interchangeable Component, Dimensions of
• FED-STD-15 – Soap- Borax Powder, for Dispensers
• FED-STD-151 – Metals; Test Methods (S/S by ASTM-E498, ASTM-E427, ASTM-E515, ASTM-A630, ASTM-A309, ASTM-A376, ASTM-B117, ASTM-G69, ASTM-G47, ASTM-E1282, ASTM-E172)
• FED-STD-156 – Fitting for Conduit Metal-Rigid, (Thick Wall and Thin Wall) EMT (Type) (No S/S Document)
• FED-STD-157 – Fittings for Electrical Cable and Flexible Metal Conduit (No S/S Document)
• FED-STD-158 – Cements, Hydraulic, Sampling, Inspection & Testing
• FED-STD-159 – Cable and Wire; Thermoplastic-Insulated, General Purpose (0-to 600- Volt Service) (S/S by Fed-Std-242A)
• FED-STD-16 – DESK, FLAT TOP AND TYPEWRITER, STEEL, (GENERAL OFFICE)
• FED-STD-161 – Battery, Storage, Vehicular, Ignition Lighting and Starting
• FED-STD-162 – Hose, Rubber, Visual Inspection Guide for (Future Acquisitions May Refer to the Association for Hose and Accessories Distribution (NAHD) Handbook "Design and Specification of Hose Assemblies")