Federal Specification

Documents

• W-T-001570 – TAPE, RECORDING, HELICAL-SCAN VIDEO, 1/2-INCH, MAGNETIC OXIDE-COATED
• W-T-001572 – TAPE, RECORDING, AUDIO, 1/4 INCH MAGNETIC OXIDE COATED (NO S/S DOCUMENT)
• W-T-0045 – TAPE, 1/4 INCH DIGITAL-RECORDING, MAGNETIC OXIDE-COATED, SPECIFICATION FOR
• W-T-0051 – TAPE, ELECTRONIC DATA PROCESSING, (MAGNETIC OXIDE-COATED, 1/2 INCH)
• W-T-0061 – TAPES, SOUND RECORDING, MAGNETIC OXIDE COATED; AND REELS, SOUND RECORDING TAPE (S/S BY W-T-70 AND W-R-175)
• W-T-0070 – TAPES, RECORDING, SOUND AND INSTRUMENTATION, MAGNETIC OXIDE COATED, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
• W-T-0070/1 – TAPE, AUDIO TYPE, CELLULOSE ACETATE BASE
• W-T-0070/2 – TAPE, AUDIO TYPE, POLYESTER BASE (NO S/S DOCUMENT)
• W-T-0070/3 – TAPE, INSTRUMENTATION TELEMETERING, CELLULOSE ACETATE BASE
• W-T-0070/4 – TAPE, INSTRUMENTATION TELEMETERING, POLYESTER BASE
• W-T-0070/5 – TAPE, HIGH RESOLUTION-LONGITUDINALLY ORIENTED, POLYESTER BASE
• W-T-1553 – Tape, Instrumentation, Recording, Magnetic Oxide-Coated, General Specification for (No S/S Document)
• W-T-1553/1 – Tape, Instrumentation Recording, Magnetic Oxide-Coated, 345 Oersteds Coercivity, 5 Dropouts per 100 Foot (FT) (30 Meters (M) of Tape, with 76.2 Millimeters (3 Inch) Center-Hole Diameter Reel (No S/S Document)
• W-T-1553/2 – Tape, Instrumentation Recording, Magnetic Oxide-Coated, 345 Oersteds Coercivity, 4 Dropouts per 100 Foot (FT) (30 Meters (M)) of Tape, with 76.2 Millimeters (MM) (3 Inch) Center-Hole Diameter Reel (No S/S Document)
• W-T-1553/3 – Tape, Instrumentation Recording, Magnetic Oxide-Coated, 700 Oersteds Coercivity, 4 Dropouts Per 100 Foot (FT) 30 Meters (M)) of Tape, with 76.2 Millimeters (MM) (3 Inch) Center-Hole Diameter Reel (No S/S Document)
• W-T-1553/4 – Tape, Instrumentation Recording, Magnetic Oxide-Coated, 800 Oersteds Coercivity, 2 Dropouts Per 100 Foot (FT) 30 Meters (M)) of Tape, with 76.2 Millimeter (MM) (3 Inch) Center-Hole Diameter Reel (No S/S Document)
• W-T-1604 – TAPE, PERFORATOR TYPE, POLYESTER BASE (NO S/S DOCUMENT)
• W-T-1633 – TAPE, MAGNETIC, AND CARTRIDGE FOR MAGNETIC TAPE AUTOMATIC TYPEWRITER, MT/ST AND MT/5C (NO S/S DOCUMENT)
• W-T-215 – Test Set, Generator and Voltage Regulator, Automotive (No S/S Document)
• W-T-231 – Testers; Capacitor (Condenser), Electric, Ignition
• W-T-550 – TOASTER, ELECTRIC, POP-UP/POP-DOWN, HEAVY-DUTY, INTERMITTENT (NO S/S DOCUMENT)
• W-T-631 – Transformer, Power Distribution (No S/S Document)
• W-T-741 – Tube, Electron, General Service (See Notice 1 for Replacement information)
• W-U-546 – UNITS, HEATING, ELECTRIC, REPLACEMENT (FOR WATER HEATERS, RANGES, AND HOT-PLATES) (S/S BY W-C-586)
• W-W-650 – WRENCH, IMPACT, ELECTRIC (NO S/S DOCUMENT)
• W-W-81 – WASHER, STORAGE BATTERY POST, NONCORROSIVE
• WW-C-00540/(the base document for this interim revision is WW-C-540A(1) NOT 1) – CONDUIT, METAL, RIGID: AND COUPLING, ELBOW, AND NIPPLE, ELECTRICAL CONDUIT: ALUMINUM (S/S BY ANSI-C80.5 AND UL6)
• WW-C-1692 – Coupling Assembly and Mender, Hose (Plastic and Rubber) (S/S by A-A-2921)
• WW-C-2928 – CAPS, FUEL STORAGE TANK (NO S/S DOCUMENT)
• WW-C-440 – Clamps, Hose, (Low-Pressure) (S/S by A-A-52506)
• WW-C-540/(an interim revision also exists for this document number as WW-C-00540C(I1) NOT 1) – CONDUIT, METAL, RIGID, (ELECTRICAL, ALUMINUM)
• WW-C-563 – Conduit, Metal, Rigid: Electrical, Thin-Wall Steel Type (Electrical Metallic Tubing) ; Straight Lengths, Elbows, and Bends (S/S by UL797)
• WW-C-566 – CONDUIT, METAL, FLEXIBLE (S/S BY A-A-55810)
• WW-C-571 – Conduit, Metal,  Rigid, and Coupling, Elbow, and Nipple, Electrical Conduit,  Enameled (S/S  by WW-C-581)
• WW-C-581 – Conduit, Metal, Rigid, and Intermediate; and Coupling, Elbow, and Nipple, Electrical Conduit: Steel, Zinc Coated (S/S by UL6, UL1242 and UL514B)
• WW-C-621 – COUPLING ASSEMBLY, HOSE (FIRE, WOVEN-JACKETED, RUBBER- OR FABRIC-LINED AND UNLINED) (S/S BY A-A-59227)
• WW-C-623 – Couplings, Hose, Garden and Water (S/S by WW-C-624)
• WW-C-624 – COUPLING ASSEMBLY, HOSE (GARDEN, WATER, AND WATER SUCTION) (S/S BY A-A-59614)
• WW-C-626 – Coupling, Hose (Oil Suction and Discharge) (No S/S Document)
• WW-C-631 – Couplings, Hose, Pneumatic and Spray (for Working Pressures up to 150 Pounds per Square Inch) (No S/S Document)
• WW-C-633 – COUPLING HALVES, CAP AND WYE; QUICK DISCONNECT PNEUMATIC HOSE, TWO-LUG UNIVERSAL TYPE (S/S BY A-A-59553)
• WW-C-636 – Couplings; Hose, Steam (S/S by M1L-C-52705)
• WW-C-646 – Coupling; Hose, Water-Suction (S/S by WW-C-624)
• WW-D-001991 – DRAIN, LAVATORY AND STOPPER, WASTE DRAIN (S/S BY A-A-2124 AND A-A-2882)
• WW-D-1908 – Dispenser, Toilet Paper, Cabinet (S/S by A-A-2668)
• WW-D-1909 – Dispenser, Paper Towel (S/S by A-A-238)
• WW-F-001910 – Faucet, Double, Single, and Lawn (Laundry Sink, Kitchen, and Lavatory) (Land Use) (S/S by ASME-A112.18.1M)
• WW-F-25 – FAUCET, (DRUM & BARREL) (S/S BY A-A-2079)
• WW-F-2743 – Furnaces, Warm Air and Heaters, Unit, Forced Air Circulation, Oil - and Gas Fired
• WW-F-2849 – FILTERS, FLUID, PRESSURE, FEEDWATER (S/S BY A-A-59249)
• WW-F-406 – Flanges, Cast-Iron (Classes 125 and 250) and Bronze (Classes 150 and 300) (S/S By ANSI-B16.1 and ANSI-B16.24)
• WW-H-001220 – HEAD SPRINKLER (UNDERGROUND CONNECTED) (S/S BY A-A-2862)
• WW-H-1053 – HOSE, METAL (FLEXIBLE, ALUMINUM ALLOY, AND CORROSION-RESISTANT AND HEAT-RESISTANT STEEL) (S/S BY A-A-59452)
• WW-H-171 – Hangers and Supports, Pipe (for Civil Agencies S/S by A-A-1192; for DOD S/S by MSS-SP-58,MSS-SP-69, NFPA11, NFPA12, NFPA13, NFPA14, NFPA15, NFPA16, and NFPA17)
• WW-H-191 – Heater, Fluid, Industrial (Instantaneous, Steam, Water Convertor Type) (No S/S Document)
• WW-H-1911 – HOLDER, TOILET PAPER (SINGLE ROLL) (S/S BY A-A-2524)
• WW-H-560 – HOLDER, SOAP (DISPOSABLE) (S/S BY A-A-296)
• WW-L-2887 – Tube, Phenolic, Porous Retainer for Use in Instrument Bearings
• WW-N-351 – Nipple, Pipe, Threaded (S/S BY ASTM-A733-86 and ASTM-B687)
• WW-N-701 – Nozzles, Hose, Garden (for 5/8 Inch and 3/4 Inch Hose) (S/S By A-A-50461)
• WW-P-00380 – Pipe and Fittings, Plastic, Rigid (Styrene Rubber, Drain and Sewer) (S/S by L-P-001221)
• WW-P-00535 – Plumbing Accessories and Medicine Cabinet, Metal (for Military Family  Housing) (Use WW-P-541)
• WW-P-1432 – Pipe, Steel (Coal Tar Enamel or Cement-Mortar Lining, and Coal Tar Enamel Coated and Wrapped) (S/S by AWWA-C205 and AWWA-C203)
• WW-P-325 – PIPE, BENDS, TRAPS, CAPS AND PLUGS, LEAD (FOR INDUSTRIAL PRESSURE, AND SOIL AND WASTE APPLICATIONS) (NO S/S DOCUMENT)
• WW-P-351 – Pipe, Red Brass, (Copper Alloy No. 230), Seamless Standard Pipe Size, Regular and Extra-Strong (S/S by ASTM-B43)
• WW-P-356 – Pipe, Cast-Iron, Drainage, Vent, and Waste (Threaded (Use ASTM-A74)
• WW-P-360 – PIPE, CAST IRON, PRESSURE, (FOR GAS, WATER OR OTHER LIQUIDS) (USE ASTM A377)
• WW-P-377 – PIPE, COPPER, SEAMLESS, STANDARD SIZES (S/S BY ASTM-B42)
• WW-P-401 – PIPE AND PIPE FITTINGS, CAST-IRON, SOIL (S/S BY ASTM-A74 AND CISPI301)
• WW-P-402 – PIPE, CORRUGATED (ALUMINUM ALLOY) (S/S BY ASTM-B745/B745M)
• WW-P-404 – Pipe, Steel (Seamless and Welded, Black and Zinc Coated) (Galvanized) (S/S by ASTM-A53)
• WW-P-405 – Pipe, Corrugated (Iron or Steel, Zinc Coated) (S/S by ASTM-A760/ASTM-A760M, ASTM-A761/ASTM-A761M, ASTM-A762/ASTM-A762M, and ASTM-A849
• WW-P-406 – PIPE, STEEL (SEAMLESS AND WELDED) (S/S BY ASTM-A120)
• WW-P-421 – Pipe, Cast Gray and Ductile Iron, Pressure (for Water and Other Liquids) (S/S by AWWA-C110, AWA-C111, AWWA-C115 and AWWA-C151)
• WW-P-441 – Pipe, Wrought Iron, (Welded, Black or Zinc Coated) (Use WW-P-406)
• WW-P-460 – Pipe Fittings; Brass or Bronze (Threaded), Classes 125 and 250 Pound
• WW-P-471 – Pipe Fittings: Bushings, Locknuts, and Plugs; Iron, Steel, and Aluminum; (Threaded); 125-150 Pounds (S/S by A-A-59616)
• WW-P-491 – Pipe Fittings, Cast Iron, (Threaded) : Drainage (S/S by ANSI-B16.12, MS90522, MS90523, MS90524, MS90525, MS90526, MS90527 MS90528)
• WW-P-501 – PIPE FITTINGS, CAST IRON, SCREWED 125 AND 250 POUND (S/S BY ASME-B16.4)
• WW-P-521 – Pipe Fittings, Flange Fittings, and Flanges, Steel and Malleable Iron (Threaded and Butt Welding) Class 150 (S/S by ASME-B16.3, ASME-B16.5 and ASME-B16.9)
• WW-P-541 – Plumbing Fixtures (General Specification)
• WW-P-541/1 – Plumbing Fixtures (Water Closets) (S/S by ASME-A112.19.2M)
• WW-P-541/2 – Plumbing Fixtures (Urinals) (S/S by ASME-A112.19.2M)
• WW-P-541/3 – Plumbing Fixtures (Bathtubs) (No S/S Document)
• WW-P-541/4 – Plumbing Fixtures (Lavatories) (No S/S Document)
• WW-P-541/5 – Plumbing Fixtures (Sinks, Kitchen, Service, and Laundry Trays) (No S/S Document)
• WW-P-541/6 – PLUMBING FIXTURES (DRINKING FOUNTAINS) (DETAIL SPECIFICATION) (NO S/S DOCUMENT)
• WW-P-541/7 – Plumbing Fixtures (Shower Bath and Emergency Eye and Face Wash Outfits) (Detail Specification) (S/S by ASME-A112.18.1M, ANSI-Z124.2, ANSI-Z358.1)
• WW-P-541/8 – Plumbing Fixtures (Accessories, Land Use)
• WW-P-541/9 – Plumbing Fixtures (Medical Facilities, Land Use) (No S/S Document)
• WW-S-001912 – Seat, Water Closet (S/S by A-A-238)
• WW-S-00615 – HEAD, SPRINKLER, (UNDERGROUND CONNECTED) (S/S BY WW-H-001220)
• WW-S-1913 – Shower Head, Ball Joint (Integral Flow Control) (S/S by A-A-240)
• WW-S-2739 – Strainers, Sediment: Pipeline, Water, Air, Gas, Oil or Steam
• WW-S-2811 – Sinks, Scullery Service and Drainboards (No S/S Document)
• WW-S-610 – Sprinkler, Lawn (Surface Connected)  (S/S by A-A-2745)
• WW-T-001914 – Trap, Drain, Plumbing Fixture (P-Trap), (Land Use) (S/S by A-A-2852)
• WW-T-00806/(the base document for this interim revision is WW-T-806B) – TUBING, ELECTRICAL, METALLIC
• WW-T-1765/(an interim amendment also exists for this document number as WW-T-1765A(I 1)) – Toilet, Portable, Self-Contained (No S/S Document)
• WW-T-1765/(the base document for this interim amendment is WW-T-1765A(1)) – TOILET, PORTABLE, SELF-CONTAINED (NO S/S DOCUMENT)