Electronic Industries Association (EIA)
Electronic Industries Association (EIA)
Documents
- EIA160 – Sound Systems (No S/S Document)
- EIA170 – Television Studio Facilities, Monochrome (No S/S Document)
- EIA215 – Basic Requirements for Broadcast Microphone Cables (No S/S Document)
- EIA222 – Steel Antenna Towers and Antenna Supporting Structures (No S/S Document)
- EIA232 – Interface Between Data Terminal Equipment and Date Circuit-Termination Equipment Employing Serial Binary Data Interchange (No S/S Document)
- EIA329 – Antennas, Communication, Part I Base Station Antennas, Minimum Standards for (No S/S Document)
- EIA330 – Closed Circuit Television Camera 525/60, Electrical Performance Standard for (No S/S Document)
- EIA359 – Color Identification and Coding, EIA Standard Colors for (No S/S Document)
- EIA364.01 – Acceleration Test Procedure for Electrical Connectors (S/S by EIA-364-01)
- EIA364.06 – Contact Resistance Test Procedure for Electrical Connectors (S/S by EIA-364-06)
- EIA364.10 – Fluid Immersion Test Procedure for Electrical Connectors and Sockets (S/S by EIA-364-10)
- EIA364.104 – Connectors, Electrical, Flammability Test Procedure for (S/S by EIA-364-104)
- EIA364.105 – Connectors, Electrical, Altitude - Low Temperature Test Procedure for (S/S by EIA-364-105)
- EIA364.11 – Connectors, Electrical, Resistance to Solvents, Test Procedure for (S/S by EIA-364-11)
- EIA364.21 – Insulation Resistance Test Procedure for Electrical Connectors, Sockets, and Coaxial Contacts (S/S by EIA/ECA-364-21)
- EIA364.22 – Simulated Life Test Procedure for Electrical Connectors (S/S by EIA-364-22)
- EIA364.23 – Low Level Contact Resistance Test Procedure for Electrical Connectors and Sockets (S/S by EIA-364-23)
- EIA364.26 – Salt Spray Test Procedure for Electrical Connectors, Contacts and Sockets (S/S by EIA/ECA-364-26)
- EIA364.29 – Contact Retention Test Procedure for Electrical Connectors (S/S by EIA/ECA-364-29)
- EIA364.35 – Connectors, Electrical, Insert Retention Test Procedure for (S/S by EIA-364-35)
- EIA364.38 – Connectors, Electrical, Cable Pull-Out Test Procedures for (S/S by EIA-364-38)
- EIA364.39 – Hydrostatic Test Procedure for Electrical Connectors, Contacts and Sockets (S/S by EIA/ECA-364-39)
- EIA364.41 – Connectors, Electrical, Cable Flexing Test Procedures for (S/S by EIA-364-41)
- EIA364.42 – Impact Test Procedure for Electrical Connectors (S/S by EIA-364-42)
- EIA364.45 – Firewall Flame Test Procedure for Electrical Connectors (S/S by EIA-364-45)
- EIA364.53 – Nitric Acid Vapor Test, Gold Finish Test Procedure for Electrical Connectors and Sockets (S/S by EIA-364-53)
- EIA364.54 – Connectors, Contacts, and Sockets, Electrical, Magnetic Permeability Test Procedure for (S/S by EIA-364-54)
- EIA364.56 – Connectors, Electrical, Soldering Heat Test Procedure for, Resistance to (S/S by EIA-364-56)
- EIA364.7 – Contact Axial Concentricity Test Procedure for Electrical Connectors (S/S by EIA/ECA-364-07)
- EIA364.71 – Connectors and Sockets, Electrical, Solder Wicking (Wave Solder Technique) Test Procedure for (S/S by EIA-364-71)
- EIA364.83 – Shell-to-Shell and Shell-to-Bulkhead Resistance Test Procedure for Electrical Connectors (S/S by EIA-364-83)
- EIA364.99 – Connectors, Electrical, Gage Location and Retention Test Procedure for (S/S by EIA-364-99)
- EIA374 – Land Mobile Selective Signaling Standard (No S/S Document)
- EIA375 – Television Monitors 525/60 Interlaced 2:1, Direct View Monochrome Closed Circuit (No S/S Document)
- EIA412 – Direct View High Resolution Monochrome Closed Circuit Television Monitors (No S/S Document)
- EIA440 – Fiber Optic Terminology (S/S by TIA-440)
- EIA448.2 – Electromechanical Components Environmental Effects of Machine Soldering, Test Standard for (S/S by ECA-EIA-448-2)
- EIA455 – Fiber Optic Fibers, Cables, Transducers, Sensors, Connecting and Terminating Devices, and Other Fiber Optic Components (S/S by TIA455)
- EIA455.100 – Gas Leakage Test for Gas - Blocked Fiber Optic Cables (S/S By TIA455.100)
- EIA455.102 – WATER PRESSURE CYCLING (NO S/S DOCUMENT)
- EIA455.104 – Fiber Optic Cable Cyclic Flexing Test, FOTP-104 (See Notice of Withdrawal for Replacement Information)
- EIA455.107 – Fiber Optic Components, Return for Loss (S/S by TIA455.107)
- EIA455.13 – Fiber Optic Components, Devices, and Assemblies, FOTP-13 Visual and Mechanical Inspection of (See Notice of Withdrawal for Replacement Information)
- EIA455.164 – Scanning Far-Field, Fiber Single-Mode, Measurement of Mode Field Diameter (No S/S Document)
- EIA455.165 – FIBER, SINGLE-MODE, MEASUREMENT OF MODE FIELD DIAMETER BY NEAR-FIELD SCANNING (S/S BY EIA-455-164)
- EIA455.166 – FIBER, SINGLE-MODE, MEASUREMENTS OF MODE FIELD DIAMETER BY TRANSVERSE OFFSET (NO S/S DOCUMENT)
- EIA455.167 – Mode Field Diameter Measurement - Variable Aperture Method in the Farfield (S/S by TIA455.167)
- EIA455.168 – Fibers Optical, Chromatic Dispersion Measurement of Multimode Graded-Index and Single-Mode, By Spectral Group Delay Measurement in the Time Domain (S/S by TIA455.168)
- EIA455.169 – Single-Mode Optical Fibers by the Phase-Shift Method, Chromatic Dispersion Measurement of (S/S by TIA455.175)
- EIA455.170 – Cable Cutoff Wavelength of Single-Mode Fiber by Transmitted Power (No S/S Document)
- EIA455.171 – Fiber Optical Cable Assemblies, Attenuation by Substitution Measurement - for Short-Length Multimode Graded-Index and Single-Mode (S/S by TIA455.171)
- EIA455.174 – Fiber Optical, Mode Field Diameter of Single-Mode, by Knife-Edge Scanning in the Far Field (No S/S Document)
- EIA455.175 – Single-Mode Optical Fibers by the Differential Phase Shift Method, Chromatic Dispersion Measurement of (S/S by TIA455.175)
- EIA455.177 – Optical Fibers, Graded Index, Numerical Aperture Measurement of (S/S by TIA455.177)
- EIA455.179 – Fiber, Cleaved, End Faces by Interferometry, Inspection of (S/S by TIA455.179)
- EIA455.18 – Optic Components and Assemblies, Fiber, Acceleration Testing of (S/S by TIA455.18)
- EIA455.2 – Optic Devices, Fiber, Impact Test Measurements for (S/S by TIA455.2)
- EIA455.21 – Fiber Optic, Interconnecting Devices, Mating Durability of (S/S by TIA455.21)
- EIA455.22 – Fiber Optic Components, Ambient Light Susceptibility of (S/S TIA455.22)
- EIA455.23 – Fiber Optic Component Seals, Air Leakage of (S/S by TIA455.23)
- EIA455.25 – Optical Fiber Cables, FOTP-25 Impact Testing of (See Notice of Withdrawal for Replacement Information)
- EIA455.26 – Fiber Optic Cable Interconnecting Devices, Crush Resistance of (S/S by TIA455.26)
- EIA455.27 – FIBERS, MEASURING OUTSIDE (UNCOATED) DIAMETER OF OPTICAL WAVEGUIDE (NO S/S DOCUMENT)
- EIA455.29 – Refractive Index Profile, Transverse Interference Method (S/S by TIA455.29)
- EIA455.3 – Optical Fibers, Optical Cable, and Other Passive Fiber Optic Components, Procedure to Measure Temperature Cycling Effects on (S/S by TIA455.3)
- EIA455.30 – Optical Fiber, Multimode, Information Transmission Capacity, FOTP-30 Frequency Domain Measurement of (See Notice of Withdrawal for Replacement Information)
- EIA455.33 – Fiber Optic Cable Tensile Loading and Bending Test (S/S by TIA455.33)
- EIA455.34 – Interconnection Device Insertion Loss Test (S/S by TIA455.34)
- EIA455.35 – Fiber Optic Component Dust (Fine Sand) Test (S/S by TIA455.35)
- EIA455.37 – Fiber Optic Cable, Low or High Temperature Bend Test for (S/S by TIA455.37)
- EIA455.4 – Fiber Optic Connector/Component Temperature Life (S/S by TIA455.4)
- EIA455.41 – Fiber Optic Cables, Compressive Loading Resistance of (S/S by TIA455.41)
- EIA455.42 – Optical Crosstalk in Fiber Optic Components (S/S by TIA455.42)
- EIA455.43 – Output Near-Field Radiation Pattern Measurement of Optical Waveguide Fibers (S/S by TIA455.43)
- EIA455.45 – OPTICAL FIBER GEOMETRY USING A LABORATORY MICROSCOPE, METHOD OF MEASURING(S/S BY EIA-455-176)
- EIA455.46 – Optical Fibers, Long-Length, Graded-Index, FOTP-46 Spectral Attenuation Measurement for (See Notice of Withdrawal for Replacement Information)
- EIA455.47 – Radiation Pattern Measurement, FOPT-47 Output Far Field (See Notice of Withdrawal for Replacement Information)
- EIA455.5 – Fiber Optic Components, Humidity Test Procedure for (S/S by TIA455.5)
- EIA455.50 – Fiber, Optical, Spectral Attenuation Measurements, Light launch Conditions for Long-Length Graded-Index (S/S by TIA455.50)
- EIA455.51 – Multimode Glass Optical Fiber Information Transmission Capacity, Pulse Distortion Measurement of (No S/S Document)
- EIA455.53 – Fibers, Optical, Attenuation by Substitution Measurement for Multimode Graded- Index or Fiber Assemblies Used in Long Haul Communications Systems (No S/S Document)
- EIA455.55 – Optical Fibers, Methods of Measuring the Coating Geometry of (No S/S Document)
- EIA455.57 – Fiber Optical, End Preparation and Examination (S/S by TIA455.57)
- EIA455.58 – Fibers, Graded-Index Optical, FOPT-58 Core Diamete Measurement of (See Notice of Withdrawal for Replacement Information)
- EIA455.59 – Measurement of Fiber Point Defects Using an OTDR (See Notice of Withdrawal for Replacement Information)
- EIA455.6 – Cable Retention Test Procedure for Fiber Optic Cable Interconnecting Devices (S/S by TIA455.6)
- EIA455.60 – Fiber or Cable Length, Measurement of, Using an OTDR (S/S by TIA455.60)
- EIA455.61 – Fiber or Cable Attenuation Using an OTDR, FOTP-61 Measurement of (See Notice of Withdrawal for Replacement Information)
- EIA455.62 – Optical Fiber Macrobend Attenuation, Measurement of (S/S by TIA455.62)
- EIA455.65 – Optical Fiber Flexure Test (No S/S Document)
- EIA455.76 – Optical Fibers by Tension, Method for Measuring Dynamic Fatigue of (No S/S Document)
- EIA455.78 – Fibers, Optical, FOTP-78 IEC 60793-1-40, Part 1-40: Measurement Methods and Test Procedure--Attenuation (See Notice of Withdrawal for Replacement Information)
- EIA455.80 – Fiber, Cutoff Wavelength of Uncabled Single-Mode, by Transmitted Power (S/S by TIA455.80)
- EIA455.81 – Optic Cable, Compound Flow (Drip) Test for Filled Fiber (S/S by TIA455.81)
- EIA455.82 – Fluid Penetration Test for Fluid-Blocked Fiber Optic Cable (S/S by TIA455.82)
- EIA455.83 – Cable to Interconnecting Device Axial Compressive Loading (No S/S Document)
- EIA455.84 – Fiber Optic Cable, Jacket Self-Adhesion (Blocking Test) for (S/S by TIA455.84)
- EIA455.87 – Fiber Optic Cable Knot Test (S/S by TIA455.87)
- EIA455.88 – Fiber Optic Cable Bend Test (S/S by TIA455.88)
- EIA455.91 – Fiber Optic Cable Twist-Bend Test (S/S by TIA455.91)