American Welding Society (AWS)

AWS-A4.2 – Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Austenitic -Ferritic Stainless Steel Weld Metal

AWS-A4.3 – Standard Methods for Determination of the Diffusible Hydrogen Content of Martensitic, Bainitic, and Ferritic Steel Weld Metal Produced by Arc Welding

AWS-A5.01 – Filler Metal Procurement Guidelines

AWS-A5.1 – WELDING, ACR, SHIELDED MATAL, CARBON STEEL ELECTRODES FOR

AWS-A5.10 – Aluminum and Aluminum, Bare, Welding Electrodes and Rods, Specification for

AWS-A5.11 – Nickel And Nickel Alloy Welding Electrodes for Shielded Metal Arc Welding, Specification for

AWS-A5.12 – Tungsten and Tungsten-Alloy Electrodes for Arc Welding and Cutting (No S/S Document)

AWS-A5.13-A5.13M – Specification for Surfacing Electrodes for Shielded Metal Arc Welding

AWS-A5.14 – WELDING ROD & ELECTRODE, NICKLE & NICKLE ALLOY BARE

AWS-A5.15 – Iron, Cast, Welding Rods and Covered Electrodes for (No S/S Document)

AWS-A5.16 – Rods and Electrodes, Titanium and Titanium Alloy Welding (No S/S Document)

AWS-A5.17 – Electrode and Fluxes, Carbon Steel, for Submerged Arc Welding

AWS-A5.18 – Welding, Carbon Steel Filler Metals for Gas Shielded ARC (S/S by AWS-A5.18/A5.18M)

AWS-A5.18-A5.18M – Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding

AWS-A5.19 – Welding Rods and Bare Electrodes, Magnesium Alloy

AWS-A5.2 – STEEL ROD, CARBON ANDLOW ALLOY, FOR OXYFUELGAS WELDING, SPECIFICATION FOR

AWS-A5.20 – Electrode, Carbon Steel, for Flux Cored ARC Welding (No S/S Document)

AWS-A5.21 – Composite Surfacing Welding Rods and Electrodes (No S/S Document)

AWS-A5.22 – Electrode, Flux Cored Corrosion Resisting Chromium and Chromium Nickel Steel (No S/S Document)

AWS-A5.23-A5.23M – Specification for Low-Alloy and High Manganese Steel Electrodes and Fluxes for Submerged Arc Welding

AWS-A5.24 – ROD & ELECTRODE, ZIRCONIUM & ZIRCONIUM ALLOY BARE WELDING

AWS-A5.25 – Steel, Low Alloy, Consumables uses for Electroslag Welding of Carbon and High Strength (No S/S Document)

AWS-A5.26 – Steel, Low Alloy, Consumables Used for Electrogas Welding of Carbon and High Strength (S/S by AWS-A5.26/A5.26M)

AWS-A5.26-A5.26M – Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas Welding

AWS-A5.27 – WELDING, OXYFUEL GAS, COPPER & COPPER ALLOY RODS FOR, SPECIFICATION FOR (S/S BY AWS-A5.7)

AWS-A5.28 – Welding, Gas Shielded Arc, Low-Alloy Steel Electrodes and Rods for (No S/S Document)

AWS-A5.29 – Electrode, Low Alloy Steel, for Flux Cored ARC Welding (S/S by AWS-A5.29/A5.29M)

AWS-A5.29-A5.29M – Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding

AWS-A5.3 – Aluminum and Aluminum Alloy for Shielded Metal Arc Welding

AWS-A5.30 – Insert, Consumable (No S/S Document)

AWS-A5.4 – Electrode, Steel Welding, Chromium & Chromium Nickel, Corrosion Resisting

AWS-A5.5 – Electrode, Arc Welding, Low Alloy Steel Covered

AWS-A5.6 – Welding Electrodes, Covered Copper and Copper Alloy Arc

AWS-A5.7 – Electrodes, Copper and Copper Alloy Bare Welding Rods

AWS-A5.8 – METALS, FILLER, FOR BRAZING, STANDARD SPECIFICATION FOR

AWS-A5.9 – Welding, Bare Stainless Steel, Electrodes and Rods

AWS-A6.1 – GAS SHIELDING ARC WELDING, SAFE PRACTICE FOR (NO S/S DOCUMENT)

AWS-A6.3 – PLASMA ARC CUTTING, SAFE PRACTICES FOR (NO S/S DOCUMENT)

AWS-B2.1 – Procedure, Welding, And Performance Qualification, Specification For

AWS-B2.2 – PROCEDURE, BRAZING, AND PERFORMANCE QUALIFICATION, STANDARD FOR

AWS-B3.0 – PROCEDURES, STANDARD QUALIFICATION (NO S/S DOCUMENT)

AWS-B4.0 – Welds, Mechanical Testing of, Standard Methods for

AWS-C1.1 – Welding, Resistance - Recommended Practices for

AWS-C1.1-C1.1M – Recommended Practices for Resistance Welding

AWS-C1.3 – Welding Coated Low Carbon Steels, Resistance-Recommended Practices for (No S/S Document)

AWS-C1.4-C1.4M – Specification for Resistance Welding of Carbon and Low-Alloy Steels

AWS-C2.1 – Spraying, Thermal, Recommended Safe Practices for (No S/S Document)

AWS-C2.16 – Thermal Spray Operator and Equipment Qualification, Guide for

AWS-C2.25-C2.25M – Feedstock, Thermal Spray, Solid and Composite Wire and Ceramic Rods

AWS-C3.2 – Evaluating the Strength of Brazed Joints in Shear, Standard Method for

AWS-C3.4 – TORCH BRAZING

AWS-C3.5 – BRAZING, INDUCTION

AWS-C3.6 – FURNACE BRAZING

AWS-C3.7 – ALUMINUM BRAZING, SPECIFICATION FOR

AWS-C5.4 – Stud Welding, Recommended Practices for

AWS-C5.5 – Gas Tungsten Arc Welding, Recommended Practices for

AWS-D1.1 – STEEL - STRUCTURAL WELDING CODE, STANDARD FOR

AWS-D1.2 – ALUMINUM - STRUCTURAL WELDING CODE, STANDARD FOR

AWS-D1.2A – Aluminum, Commentary on Structural Welding Code (No S/S Document)

AWS-D1.3 – SHEET STEEL - STRUCTURAL WELDING CODE, STANDARD FOR

AWS-D1.4 – STEEL REINFORCING STRUCTURAL WELDING CODE

AWS-D10.9 – Welding Procedures and Welders for Piping and Tubing (S/S by AWS-B2.1)

AWS-D14.1 – CRANES, WELDING OF INDUSTRIAL AND MILL, AND OTHER MATERIAL HANDLING EQUIPMENT, SPECIFICATION FOR

AWS-D14.3 – Procedure, Welding, And Performance Qualification, Specification For

AWS-D14.6 – Welding of Rotating Elements of Equipment, Specification for

AWS-D15.1 – Railroad Welding Specification - Cars and Locomotives

AWS-D17.1 – Fusion Welding for Aerospace Applications, Specification for (No S/S Document)

AWS-D17.1-D17.1M – Fusion Welding for Aerospace Applications

AWS-D3.6 – WELDING, UNDERWATER, SPECIFICATION FOR

AWS-D8.1M – Specification for Automotive Weld Quality - Resistance Spot Welding of Steel

AWS-D9.1 – SHEET METAL WELDING CODE

AWS-F2.1 – Recommended Safe Practice for Electron Beam Welding and Cutting (No S/S Document)

AWS-NAVSEA-B2.1-1-301 – Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-70S-2, in the As-Welded or PWHT Condition, Primarily Plate and Structural Naval Applications

AWS-NAVSEA-B2.1-1-302 – Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Shielded Metal Arc Welding of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-7018-M, in the As-Welded or PWHT Condition, Primarily Plate and Structural Naval Applications

AWS-NAVSEA-B2.1-1-311 – Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38mm] Thick, MIL-70S-2, in the As-Welded or PWHT Condition, Primarily Pipe for Naval Applications

AWS-NAVSEA-B2.1-1-312 – Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Shielded Metal Arc Welding of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38] Thick, MIL-7018-M, in the As-Welded Or PWHT Condition, Primarily Pipe for Naval Applications

AWS-NAVSEA-B2.1-8-308 – Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (S-8), 1/8 through 1-1/2 inch Thick, MIL-3XX, As-Welded Condition, Primarily Plate and Structural Naval Applications

AWS-NAVSEA-B2.1-8-309 – Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Shielded Metal Arc Welding of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38mm]Thick, MIL-3XX-XX, in the As-Welded Condition, Primarily Plate and Structural Naval Applications

AWS-NAVSEA-B2.1-8-318 – Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (S-8), 1/8 through 1-1/2 Inch Thick, Mil-3XX, As-Welded Condition, Primarily Pipe for Naval Applications

AWS-NAVSEA-B2.1-8-319 – Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Shielded Metal Arc Welding of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm]Thick, MIL-3XX-XX, in the As-Welded Condition, Primarily Pipe for Naval Applications

AWS-Z49.1 – Welding, Cutting, and Allied Processes, Safety in

American Welding Society (AWS)

American Welding Society (AWS)

Documents