American Society of Mechanical Engineers (ASME)
American Society of Mechanical Engineers (ASME)
Documents
- ASME4 – BOILER & PRESSURE VESSEL, SECTION IV - 1971 (NO S/S DOCUMENT)
- ASME8 – BOILER & PRESSURE VESSEL, SECTION VIII OF DIV. 1 - 1971 (NO S/S DOCUMENT)
- ASME9 – ASME BOILER AND PRESSURE VESSEL CODE WELDING AND BRAZING QUALIFICATIONS - 1974
- ASME-A112.1.2 – Air Gaps in Plumbing Systems (For Plumbing Fixtures and Water-Connected Receptors)
- ASME-A112.14.1 – VALVES, BACKWATER (NO S/S DOCUMENT)
- ASME-A112.18.1 – Plumbing Supply Fittings
- ASME-A112.18.1M – FITTINGS, PLUMBING FIXTURE (NO S/S DOCUMENT)
- ASME-A112.19.1M – Enameled Cast Iron Plumbing Fixtures, American National Standard for (See Notice for Replacement Information)
- ASME-A112.19.2 – Ceramic Plumbing Fixtures
- ASME-A112.19.3M – STAINLESS STEEL PLUMBING FIXTURES (DESIGNED FOR RESIDENTIAL USE) AMERICAN NATIONAL STANDARD FOR (NO S/S DOCUMENT)
- ASME-A112.19.4M – Porcelain Enameled Formed Steel Plumbing Fixtures
- ASME-A112.19.5 – Flush Valves and Spuds for Water Closets, Urinals, and Tanks
- ASME-A112.21.1M – FLOOR DRAINS (NO S/S DOCUMENT)
- ASME-A112.21.2M – Drain, Roof (See Notice for Replacement Information)
- ASME-A112.26.1M – ARRESTER, WATER HAMMER (NO S/S DOCUMENT)
- ASME-A112.36.2M – Cleanouts
- ASME-A112.6.1M – Supports for Off-the-Floor Plumbing fixtures for Public Use
- ASME-A112.6.3 – Floor And French Drains
- ASME-A13.1 – Piping Systems, Scheme for the Identification of
- ASME-A17.1 – Safety Code for Elevators and Escalators Includes Requirements for Elevators, Escalators, Dumbwaiters, Moving Walks, Material Lifts, and Dumbwaiters with Automatic Transfer Devices
- ASME-A17.2 – ELEVATORS AND ESCALATORS, INSPECTORS MANUAL FOR (NO S/S DOCUMENT)
- ASME-A17.2.1 – CHECKLIST FOR INSPECTION AND TEST OF ELECTRIC ELEVATORS
- ASME-A17.2.2 – CHECKLIST FOR INSPECTION OF HYDRAULIC ELEVATORS
- ASME-A39.1 – WINDOWING CLEANING, SAFETY REQUIREMENTS FOR - WITH ADDENDA A39.1B-89 (NO S/S DOCUMENT)
- ASME-AG1 – Code on Nuclear Air and Gas Treatment
- ASME-B1.1 – Screw Threads, Unified, (UN and UNR Thread Form)
- ASME-B1.12 – Thread Class 5 Interference-Fit
- ASME-B1.13M – Screw Threads - M Profile Metric
- ASME-B1.16M – Gages and Gaging for Metric M Screw Threads
- ASME-B1.2 – Gages and Gaging for Unified Inch Screw Threads
- ASME-B1.20.1 – Pipe Threads, General Purpose (Inch)
- ASME-B1.20.3 – Thread, Dryseal Pipe
- ASME-B1.20.5 – Gaging For Dryseal Pipe Threads (Inch)
- ASME-B1.20.7 – Hose Coupling Screw Threads (Inch)
- ASME-B1.21M – Metric Screw Threads - MJ Profile
- ASME-B1.22M – Gages and Gaging for MJ Series Metric Screw Threads – Revision of ANSI B1.22-1978
- ASME-B1.3M – Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Theads (UN, UNR, UNJ, M, and MJ)
- ASME-B1.5 – Acme Screw Threads
- ASME-B1.7 – Screw Threads: Nomenclature, Definitions, and Letter Symbols
- ASME-B1.7M – Screw Threads, Nomenclature, Definitions, and Letter Symbols for
- ASME-B1.8 – Stub Acme Screw Threads
- ASME-B1.9 – Buttress Inch Screw Threads 7 Degrees/45 Degrees Form with 0.6 Pitch Basic Height of Thread Engagement
- ASME-B107.1 – Wrenches, Socket, Hand (Inch Series)
- ASME-B107.10M – Wrenches, Socket, Handles and Attachments for Hand (Inch and Metric Series)
- ASME-B107.11 – Pliers, Diagonal Cutting, and Nippers, End Cutting
- ASME-B107.11M – Pliers, Diagonal Cutting, and Nippers, End Cutting (See Notice of Withdrawal for Replacement Information)
- ASME-B107.14M – Tools, Hand, Torque (See Notice of Withdrawal for Replacement Information)
- ASME-B107.15 – Screwdrivers, Flat Tip and Phillips (See Notice of Withdrawal for Replacement Information)
- ASME-B107.16 – Shears (Metal Cutting, Bench and Hand) (See Notice of Withdrawal for Replacement Information)
- ASME-B107.17M – Gages, Wrench Openings, Reference
- ASME-B107.19 – Pliers, Retaining Ring (See Notice of Withdrawal for Replacement Information)
- ASME-B107.2 – Wrenches, Socket, Extensions, Adaptors, and Universal Joints, Power Drive (Impact) (Inch Series)
- ASME-B107.20M – Pliers (Lineman's, Iron Worker's, Gas, Glass, and Fence) (See Notice of Withdrawal for Replacement Information)
- ASME-B107.21 – Wrench, Crowfoot Attachments (See Notice of Withdrawal for Replacement Information)
- ASME-B107.23M – Pliers, Multiple Position, Adjustable (Metric) (See Notice of Withdrawal for Replacement Information)
- ASME-B107.4 – TOOLS, PORTABLE HAND, AIR, AND ELECTRIC, DRIVING AND SPINDLE ENDS FOR
- ASME-B107.5M – Socket Wrenches, Hand (Metric Series)
- ASME-B107.8M – Wrenches, Adjustable (See Notice of Withdrawal for Replacement Information)
- ASME-B15.1 – Mechanical Power Transmission Apparatus, Safety Standard for (See Notice of Withdrawal for Replacement Information)
- ASME-B16.1 – Pipe, Cast Iron, Flanges and Flanged Fittings
- ASME-B16.10 – Valves, Dimensions of Face-to-Face and End-to-End Standard for
- ASME-B16.11 – Fittings, Forged, Socket-Welding and Threaded
- ASME-B16.12 – Cast Iron Threaded Drainage Fittings
- ASME-B16.14 – Ferrous Type Plugs, Bushings, and Lock Nuts with Pipe Threads, Standard for
- ASME-B16.15 – Cast Copper Alloy Threaded Fittings Classes 125 and 250
- ASME-B16.18 – Cast Copper Alloy Solder Joint Pressure Fittings
- ASME-B16.20 – Gaskets, Metallic, for Pipe Flanges - Ring-Joint, Spiral-Wound, and Jacketed
- ASME-B16.21 – Gaskets, Flat, Nonmetallic, for Pipe Flanges
- ASME-B16.22 – Wrought Copper and Copper Alloy Solder Joint Pressure Fittings
- ASME-B16.23 – Fittings - DWV, Cast Copper Alloy Solder Joint Drainage
- ASME-B16.24 – Flanges, Cast Copper Alloy Pipe, and Flanged Fittings Class 150, 300, 400, 600, 900, 1500 and 2500
- ASME-B16.25 – End, Buttwelding
- ASME-B16.26 – CAST COPPER ALLOY FITTINGS FOR FLARED COPPER TUBES
- ASME-B16.28 – Wrought Steel Buttwelding Short Radius Elbows and Returns (No S/S Document)
- ASME-B16.29 – Fitting - DWY, Wrought Copper and Wrought Copper Alloy Solder Joint Drainage
- ASME-B16.3 – Fitting, Malleable Iron Threaded (Classes 150 AD 300)
- ASME-B16.32 – JOINT FITTINGS, CAST COPPER ALLOY SOLDER, FOR SOVENT DRAINAGE SYSTEMS, STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)
- ASME-B16.33 – Manually Operated Metallic Gas Valves for Use in Gas Piping Systems Up to 175 psi (Sizes NPS ½ Through NPS 2)
- ASME-B16.34 – Valves, Flanged, Threaded, and Welding End
- ASME-B16.36 – Flanges, Orifice
- ASME-B16.38 – Large Metallic Valves for Gas Distribution - Manually Operated, NPS 2½ (DN 65) to NPS 12 (DN 300), 125 psig (8.6 bar) Maximum
- ASME-B16.39 – Pipe Union, Malleable Iron Threaded
- ASME-B16.4 – Fitting, Cast Iron Threaded Fittings, Classes 125, American National Standard
- ASME-B16.40 – Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems
- ASME-B16.42 – Ductile Iron Pipe Flanges and Flanged Fittings, Classes 150 and 300
- ASME-B16.5 – Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24 Metric/Inch
- ASME-B16.9 – Fittings, Steel Buttwelding, Factory-Made Wrought
- ASME-B17.1 – Keys and Keyseats
- ASME-B17.2 – Woodruff Keys and Keyseats
- ASME-B18.1.3M – Metric Small Solid Rivets
- ASME-B18.10 – BOLTS & NUTS, TRACK
- ASME-B18.13.1M – Screw and Washer Assemblies - SEMS (Metric Series)
- ASME-B18.15 – Eyebolt, Forged
- ASME-B18.16.1M – Steel Metric Hex Nuts and Hex Flange Nuts, Prevailing-Torque Mechanical and Performance Requirements for (See Notice of Withdrawal for Replacement Information)
- ASME-B18.16.2M – Steel Metric Hex Nuts and Hex Flange Nuts, Prevailing-Torque Type, Torque-Tension Test Requirements for (See Notice of Withdrawal for Replacement Information)
- ASME-B18.16.3M – Steel Metric Hex Nuts and Hex Flange Nuts, Prevailing-Torque Type, Dimensional Requirements (See Notice of Withdrawal for Replacement Information)
- ASME-B18.18.1M – Fasteners, General Purpose, Inspection & Quality Assurance for
- ASME-B18.18.2M – Fasteners, High Volume Machine Assembly, Inspection & Quality Assurance for
- ASME-B18.18.3M – Fasteners, Special Purpose, Inspection & Quality Assurance for
- ASME-B18.18.4M – Fasteners for Highly Specialized Engineered Applications, Inspection and Quality Assurance for