FSC-NDTI: Nondestructive Testing, Inspection

Documents

• API-STD-2550 – CYLINDRICAL TANK, UPRIGHT, STANDARD METHOD FOR MEASUREMENT & CALIBRATION OF
• ASME-B89.3.1 – Measurement Of, Out-Of-Roundness
• ASTM-A275-A275M – Steel Forgings, Magnetic Particle Examination of
• ASTM-A341-A341M – Magnetic Properties of Direct Current of Materials Using D-C Permeameters and the Ballistics Test Methods
• ASTM-A342-A342M – Standard Test Methods for Permeability of Weakly Magnetic Materials
• ASTM-B594 – Aluminum Alloy Wrought Products for Aerospace Applications, Ultrasonic Inspection of
• ASTM-B63 – Materials, Metallically Conducting Resistance and Contact, Resistivity of
• ASTM-D1400 – Coatings Applied to a Nonferrous Metal Base, Dry Film Thickness of, Nonconductive, Nondestructive Measurement of (No S/S Document)
• ASTM-D2228 – Rubber Property-Relative Abrasion Resistance by the PICO Abrader Method
• ASTM-D2303 – Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
• ASTM-D747 – Plastics by Means of a Cantilever Beam, Apparent Bending Modulus of
• ASTM-E1001 – Waves, Using Longitudinal, Discontinuities by the Immersed Pulse-Echo Ultrasonic Method, Detection and Evaluation of
• ASTM-E114 – Pulse-Echo Straight-Beam Examination, Ultrasonic, by the Contact Method
• ASTM-E1225 – Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique
• ASTM-E125 – CASTINGS, MAGNETIC PARTICLE INDICATIONS ON FERROUS
• ASTM-E1251 – Aluminum and Aluminum Alloys by Atomic Emission Spectrometry, Analysis of
• ASTM-E127 – Standard Practice for Fabrication and Control of Flat Bottomed Hole Ultrasonic Standard Reference Blocks
• ASTM-E1320 – Titanium Castings, Standard Reference Radiographs for
• ASTM-E1417-E1417M – Liquid Penetrant Examination, Standard Practice for
• ASTM-E142 – Radiographic Testing, Controlling Quality of (S/S by ASTM-E94)
• ASTM-E1441 – Imaging, Computed Tomography (CT)
• ASTM-E1444 – PARTICLE TESTING, MAGNETIC
• ASTM-E155 – Radiographs for Inspection of Aluminum and Magnesium Castings, Standard Reference
• ASTM-E1570 – Examination, Computed Tomographic (CT)
• ASTM-E164 – Weldments, Ultrasonic Contact Examination of
• ASTM-E165 – LIQUID PENETRANT INSPECTION METHOD (REAPPROVED) (SEE MIL-STD-6866)
• ASTM-E1672 – System Selection, Computed Tomography (CT)
• ASTM-E168 – Analysis, Infrared Quantitative, General Techniques of
• ASTM-E1695 – Tomography (CT), Computed, System Performance, Measurement of
• ASTM-E1742 – Radiographic Examination (S/S by ASTM-E1742/E1742M)
• ASTM-E1742-E1742M – Radiographic Examination, Standard Practice for
• ASTM-E186 – Steel Castings, Heavy-Walled (2 to 4 1/2-IN. (51 to 114-MM)), Standard Reference Radiographs for
• ASTM-E192 – Steel Castings of Aerospace Applications, Standard Reference Radiographs of Investment
• ASTM-E227 – Aluminum and Aluminum Alloys by the Point-to-Plane Technique, Optical Emission Spectrometric Analysis of (No S/S Document)
• ASTM-E2375 – Ultrasonic Testing of Wrought Products, Standard Practice for
• ASTM-E2533 – Polymer Matrix Composites, Nondestructive Testing of, Used in Aerospace Applications
• ASTM-E2581 – Polymer Matrix Composites, Shearography of, Sandwich Core Materials and Filament-Wound Pressure Vessels in Aerospace Applications
• ASTM-E2582 – Thermography, Infrared Flash, of Composite Panels and Repair Patches Used in Aerospace Applications
• ASTM-E2662 – Panel, Flat, Radiologic Examination of, Composites and Sandwich Core Materials Used in Aerospace Applications
• ASTM-E2663 – Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods
• ASTM-E268 – ELECTROMAGNETIC TESTING - 26 OCT 1984 (USE ASTM E1316-89 SEC-C)
• ASTM-E269 – MAGNETIC PARTICLE EXAMINATION, STANDARD DEFINITIONS OF TERMS RELATING TO - 26 OCT 1984 (USE ASTM E1316-89 SEC-F)
• ASTM-E2699 – Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods
• ASTM-E270 – DEFINITIONS OF TERMS RELATING TO LIQUID PENETRANTS INSPECTION (S/S BY ASTM-E1316)
• ASTM-E272 – Copper-Base and Nickel-Copper Alloy Castings, High-Strength
• ASTM-E273 – Ultrasonic Examination of the Weld Zone of Welded Pipe and Tubing
• ASTM-E2738 – Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods
• ASTM-E2767 – Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods
• ASTM-E280 – Steel Castings, Heavy-Walled (4 1/2 to 12-inches (114 to 305mm)) Standard Reference Radiographs for
• ASTM-E310 – Standard Reference Radiographs for Tin Bronze Castings
• ASTM-E317 – Instruments, Electronic Measurement, Evaluating Performance Characteristic of Ultrasonic Pulse-Echo Examination Instruments and Systems without the Use of
• ASTM-E334 – Microanalysis, Infrared, General Techniques of
• ASTM-E376 – Magnetic-Field or Eddy-Current (Electromagnetic) Measuring Coating Thickness by, Test Methods
• ASTM-E390 – Steel Fusion Welds
• ASTM-E428 – Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing
• ASTM-E446 – Steel Castings up to 2 In. (51 MM) in Thickness, Standard Reference Radiographs for
• ASTM-E493 – SPECTROMETER, LEAKS USING THE MASS, LEAK DETECTOR IN THE INSIDE-OUT TESTING MODE
• ASTM-E494 – Pulse- Echo Straight-Beam Examination, Ultrasonic, by the Contact Method, Detection and Evaluation of
• ASTM-E498-E498M – Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
• ASTM-E499 – Spectrometer, Leaks Using the Mass, Leak Detector in the Detector Probe Mode (S/S by ASTM-E499/E499M)
• ASTM-E499-E499M – Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
• ASTM-E536 – Zinc and Zinc Alloys, Chemical Analysis of
• ASTM-E543 – Agencies, Performing,Nondestructive Testing
• ASTM-E545 – Neutron Radiographic Examination, Direct Thermal, Determining Image Quality in
• ASTM-E607 – Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere (No S/S Document)
• ASTM-E662 – Smoke Generated by Solid Materials, Specific Optical Density of
• ASTM-E709 – EXAMINATION, MAGNETIC PARTICLE (SEE NOTICE FOR ADDITIONAL INFORMATION)
• ASTM-F1080 – Determining the Consistency of Viscous Liquids Using a Consistometer
• ASTM-F22 – Hydrophobic Surface Films by the Water-Break Test
• AWS-A2.2 – NONDESTRUCTIVE TESTING SYMBOLS - 1958 (S/S BY AWS A2.4-79)
• DI-NDTI-80492 – Integrated Circuit Production Test Report
• DI-NDTI-80566 – Test Plan
• DI-NDTI-80603 – Test Procedure
• DI-NDTI-80808 – TEST PLANS/PROCEDURES
• DI-NDTI-80809 – Test/Inspection Report
• DI-NDTI-80884 – Randomizer Test Report
• DI-NDTI-81284 – Test and Evaluation Program Plan (TEPP) (No S/S Document)
• DI-NDTI-81307 – First Article Qualification Test Plan and Procedures
• DI-NDTI-81322 – Equipment Bench, Pre-Flight, and Flight Test Procedures  (No S/S Document)
• DI-NDTI-81323 – Engineering Data on Equipment Submitted for Testing  (No S/S Document)
• DI-NDTI-81351 – Security Test Plan
• DI-NDTI-81583 – Equipment Inspection and Testing Report (S/S by DI-SESS-81628)
• DI-NDTI-81587 – Vibration Survey Report
• DI-NDTI-81895 – Engine Control System Component Test Plan Requirements
• DI-NDTI-81896 – Engine Control System Component Similarity/Analysis Report
• DI-NDTI-81897 – Engine Control System Component Test Report Requirements
• DI-NDTI-81936 – Non-Destructive Testing Training Program
• DI-NDTI-82110 – Air Test Report
• DI-NDTI-82181 – Nondestructive Inspection (NDI) Program Plan
• DI-NDTI-82326 – First Article Test/Inspection Procedures and Report (FAT/IPR)
• DI-NDTI-82327 – First Article Test/Inspection Procedures and Plan (FAT/IPP)
• IEEE400 – Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz)
• MIL-C-6021 – Casting, Classification and Inspection of (S/S by MIL-STD-2175)
• MIL-DTL-19595 – Magnetic Effect Limits for Non-Magnetic Equipment Used in the Proximity of Magneitc Influence Ordnance
• MIL-G-62454 – Gear Bevel, Inspection of (S/S by ANSI/AGMA-2000)
• MIL-HDBK-1264 – Radiographic Inspection for Soundness of Welds in Steel by Comparison to Graded ASTM E390 Reference Radiographs
• MIL-HDBK-1823 – Nondestructive Evaluation System Reliability Assessment
• MIL-HDBK-1890 – Inspection of Welded Joints
• MIL-HDBK-1899 – Pressure Testing, 10 PSI through 200 PSI (See Notice 2 for Replacement Information)
• MIL-HDBK-333 – Handbook for Standardization of Nondestructive of Nondestructive Testing Methods Volume 1 and 2 (S/S by MIL-HDBK-728/1, 728/2, 728/3, 728/4, 728/5)