FSC-95GP

Documents

• ASTM-G44 – Metals and Alloys by Alternate Immersion in 3.5 Percent Sodium Chloride Solution, Exposure of
• ASTM-G47 – Aluminum Alloy Products, Determining Susceptibility to Stress Corrosion Cracking of 2XXX and 7XXX
• DOD-HDBK-249 – Metals and Alloys, Rapid On-Site Identification of (Recommended Procedure for Chemical Spot Testing and Associated Physical Tests to Verify Metal Alloy Classification) (Metric)
• FED-STD-146 – TOLERANCES FOR COPPER AND COPPER BASE ALLOY MILL PRODUCTS (S/S BY SAE-MAM2221, SAE-AMS2221, SAE-MAM2222, SAE-AMS2222, SAE-MAM2223, SAE-AMS2223, SAE-MAM2224 AND SAE-AMS2224)
• FED-STD-151 – Metals; Test Methods (S/S by ASTM-E498, ASTM-E427, ASTM-E515, ASTM-A630, ASTM-A309, ASTM-A376, ASTM-B117, ASTM-G69, ASTM-G47, ASTM-E1282, ASTM-E172)
• FED-STD-182 – Continuous Identification Marking of Nickel and Nickel Base Alloy (See Notice 3 for Replacement information)
• FED-STD-184 – Identification Marking of Aluminum, Magnesium, and Titanium (S/S by SAE-AMS2808, SAE-AMS2809, and ASTM-B666/B666M)
• FED-STD-185 – Identification Marking of Copper and Copper Base Alloy Mill Products (S/S by SAE-AMS-STD-185)
• FED-STD-245 – Tolerance for Aluminum Alloy and Magnesium Alloy Wrought Products
• FED-STD-66 – Steel: Chemical Composition and Hardenability (S/S by SAE-air4127)
• MIL-A-12545 – Aluminum Alloy Impacts (S/S BY ASTM-B221)
• MIL-A-15153 – Aluminum Base Alloy Die Casting (use QQ-A-591)
• MIL-A-21999 – Aluminum Alloy Investment Castings
• MIL-A-799 – Aluminum, High-Purity, Wrought
• MIL-A-8705 – Aluminum Alloy, Bare and Alclad 2024(24S), Artificial Aging of (Supersedes A-A-42)
• MIL-B-18343 – Brass Castings, Leaded Semi-Red (Ornamental Bronze) (Use QQ-L-225)
• MIL-B-892 – Bronze, Phosphor, Rolled or Drawn: Bars, Plated, Rods, Sheets and Strips (S/S QQ-P-330)
• MIL-C-18482 – Carbide Stocks, Bearing, Cemented, Naval Radioactive System Service
• MIL-C-19052 – Cleaning and Protecting Interior Non-Machined Surfaces of Castings and Weldments
• MIL-C-7460 – Chromium Plating, Porous Channel Type, Aircraft Engine Cylinders, General Specification for (No S/S Document)
• MIL-DTL-32683 – Nickel Alloy Powder Metallurgy Parts, Hot Isostatic Pressed (UNS N06600, N06625, and N06690)
• MIL-DTL-32716 – Stainless Steel Powder Metallurgy Parts, Hot Isostatic Pressed (UNS S31600/S31603)
• MIL-H-6088 – Heat Treatment of Aluminum Alloys (S/S by SAE-AMS-H-6088)
• MIL-H-6875 – Heat Treatment of Steel, Process for (S/S by SAE-AMS-H-6875)
• MIL-H-81200 – Heat Treatment of Titanium and Titanium Alloys (S/S by SAE-AMS-H-81200)
• MIL-HDBK-270 – Metallic Materials for Low Magnetic Applications, Magnetic Permeability and Electrical Conductivity, Characteristics of (Metric)
• MIL-HDBK-693 – Magnesium and Magnesium Alloys
• MIL-HDBK-698 – Copper and Copper Alloys
• MIL-HDBK-8 – Steel and Wrought Iron Products (use MIL-HDBK-723)
• MIL-M-12286 – Macroetch Test and Macrographs for Resulphurized Steel Bars, Billets and Blooms (No S/S Document)
• MIL-M-47181 – MOLECULAR STRUCTURE STABILIZATION, PROCEDURE FOR (NO S/S DOCUMENT)
• MIL-N-4498 – NICKEL-COPPER ALLOY, CASTINGS (S/S BY QQ-N-288)
• MIL-P-47226 – PLATING, COPPER, ELECTROLESS (FOR NON-CONDUCTING MATERIAL) (NO S/S DOCUMENT)
• MIL-S-11988 – STEEL FORGINGS AND CASTINGS FOR RECOIL AND RECUPERATOR CYLINDERS
• MIL-S-15073 – STEEL, ALLOY (CHROMIUM AND NICKEL CHROMIUM), BARS, FORGINGS AND FINISHED PIECES
• MIL-S-18262 – STEEL, CORROSION RESISTING, RADIOACTIVE SYSTEM SERVICE
• MIL-S-19657 – STEEL FORGINGS, PHOTOMICROGRAPHIC STANDARDS FOR (NO S/S DOCUMENT)
• MIL-S-19658 – STEEL, HOT WORKED, PHOTOMACROGRAPHIC STANDARDS
• MIL-S-22494 – STEEL FORGINGS, CARBON AND LOW ALLOY, FOR PRESSURE VESSELS, NUCLEAR PLANT SERVICE
• MIL-S-23495 – STEEL, CARBON, EXTRUSIONS, STRUCTUAL FOR SHIPS (FOR FUTURE ACQUISITION (S/S BY MIL-S-22698)
• MIL-S-47180 – SEAL, STEEL, GLASS TO METAL, FOR (NO S/S DOCUMENT)
• MIL-STD-1601 – METHOD FOR 5/8 INCH DYNAMIC TEAR TESTING OF METALLIC MATERIALS (S/S BY ASTM-E604)
• MIL-STD-192 – ALLOY AND TEMPER DESIGNATION SYSTEM FOR WROUGHT ALUMINUM (USE USAS H35.1-1967)
• MIL-STD-2034 – Qualification Requirements for Material Specifications
• MIL-STD-367 – Armor Test Data Reporting (No S/S Document)
• MIL-STD-455 – ALLOY DESIGNATION SYSTEM FOR WROUGHT AND CAST COPPER AND COPPER ALLOYS (S/S BY SAE-HS1086)
• MS35628 – THINNER, SYNTHETIC ENAMEL
• MSS-SP55 – STEEL CASTINGS FOR VALVES, FLANGES & FITTINGS & OTHER PIPING COMPONENTS (VISUAL METHOD) QUALITY STANDARD FOR
• QQ-A-245 – ALUMINUM AND ALUMINUM ALLOY WROUGHT PRODUCTS, TOLERANCES FOR (S/S BY FED-STD-245)
• QQ-B-746 – Bronze, Phosphor; Bars, Plates, Rods, Shapes, Sheets, and Strips (S/S by QQ-P-330)
• QQ-C-501 – COPPER; BARS, PLATES, RODS, SHAPES, SHEETS, AND STRIPS (S/S BY QQ-C-502 & QQ-C-576)
• QQ-C-551 – Copper-Nickel-Alloy ; Castings (S/S by QQ-N-288)
• QQ-M-151 – METALS; GENERAL SPECIFICATION FOR INSPECTION OF (S/S BY FED-STD-151)
• QQ-M-31 – Magnesium Alloy, Bars, Rods, and Special Shaped Sections, Extruded (S/S by ASTM-B107)
• QQ-P-330 – Phosphor Bronze Bars, Plates, Rods, Sheets, Strips, Flat Wire, and Structural and Special Shaped Sections (S/S by QQ-B-750)
• SAE-AIR4127 – Steel: Chemical Composition and Hardenability
• SAE-AMS2241 – STEEL, CORROSION AND HEAT RESISTANT STEEL, IRON ALLOY, TITANIUM, AND TITANIUM ALLOY BARS AND WIRE, TOLERANCES
• SAE-AMS2242 – TOLERANCES CORROSION AND HEAT RESISTANT STEEL, IRON ALLOY, TITANIUM, AND TITANIUM ALLOY SHEET, STRIP, AND PLATE
• SAE-AMS2248 – Chemical Check Analysis Limits Corrosion and Heat Resistant Steels and Alloys, Maraging and Other Highly-Alloyed Steels, and Iron Alloys
• SAE-AMS2249 – Chemical Check Analysis Limits Titanium and Titanium Alloys
• SAE-AMS2259 – Steels, Chemical Check Analysis Limits Wrought Low-Alloy and Carbon
• SAE-AMS2269 – Chemical Check Analysis Limits Nickel, Nickel Alloys, And Cobalt Alloys
• SAE-AMS2310 – Qualification Sampling and Testing of Steels Transverse Tensile Properties
• SAE-AMS2315 – DETERMINATION OF DELTA FERRITE CONTENT
• SAE-AMS2368 – Titanium, Wrought, Raw Material Except Forgings and Forgings and Forging Stock, Sampling and Testing of
• SAE-AMS2370 – Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Wrought Products and Forging Stock
• SAE-AMS2658 – Aluminum Alloy Parts, Wrought, Hardness and Conductivity Inspection of
• SAE-AMS2759 – Heat Treatment of Steel Parts, General Requirements
• SAE-AMS2759/3 – Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts
• SAE-AMS2770 – Heat Treatment of Wrought Aluminum Alloy Parts
• SAE-AMS2801 – Heat Treatment Of Titanium Alloy Parts
• SAE-AMS2809 – Identification, Titanium and Titanium Alloy Wrought Products
• SAE-AMS4120 – Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated, Cold Worked, and Naturally Aged (T351)
• SAE-AMS4121 – Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished 4.5CU-0.85SI-0.8MN-0.50MG (2014-T6) Solution and Precipitation Heat Treated
• SAE-AMS4640 – Aluminum Bronze Bars, Rods, Shapes, Tubes, And Forgings 81.5cu - 10.0al - 4.8ni - 3.0fe Drawn And Stress Relieved (Hr50) Or Temper Annealed (Tq50)
• SAE-AMS4908 – TITANIUM ALLOY, SHEET AND STRIP 8MN ANNEALED, 110 KSI (758 MPA) YIELD STRENGTH (NO S/S DOCUMENT)
• SAE-AMS5020 – Steel Bars, Forgings, and Tubing, Free-Cutting 1.5Mn-0.25Pb (0.32 - 0.39C) (11L37) (No S/S Document)
• SAE-AMS5024 – Steel Bars, Forgings, and Tubing, Free-Cutting 1.5MN (0.32 - 0.39C) (SAE 1137)
• SAE-AMS5047 – Steel Sheet and Strip 0.08-0.13C, Aluminum Killed Deep Forming Grade
• SAE-AMS5069 – Steel Bars, Forgings, and Tubing 0.15 - 0.20C (SAE 1018)
• SAE-AMS5080 – STEEL BARS, FORGINGS, AND TUBING 0.31 - 0.38C (SAE 1035)
• SAE-AMS5085 – Steel Sheet, Strip, and Plate 0.48 - 0.55C (SAE 1050)Annealed
• SAE-AMS5120 – Steel Strip 0.68 - 0.80C STRIP (SAE 1074)
• SAE-AMS5637 – Steel, Corrosion Resistant, Bars and Wire 18CR - 9.0NI (SAE 30302) Solution Heat Treated and Cold Drawn 125 KSI (862 MPA) Tensile Strength
• SAE-AMS5641 – Steel, Corrosion Resistant, Bars, Wire, and Forgings, 18.5CR - 10NI - 0.22SE (SAE30303SE) Free-Machining, Swaging or Upsetting Solution Heat Treated
• SAE-AMS5643 – Steel, Corrosion Resistant, Bars, Wire, Forgings, Tubing, and Rings 16CR-4.0NI-0.30CB-4.0CU Solution heat Treated, Precipitation Hardenable
• SAE-AMS5646 – Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing and Rings 18CR-11NI-0.60CB (SAE 30347) Soluttion Heat Treated
• SAE-AMS5856 – ALLOY BILLETS AND PERFORMS, CORROSION AND HEAT RESISTANT 59.5NI - 12CR - 10CO - 3.0MO - 6.0W - 3.0TI - 1.5TA - 4.5AL - 0.015B - 0.10ZR (0.30 - 0.35C), POWDER-METALLURGY PRODUCT (NO S/S DOCUMENT)
• SAE-AMS6415 – Steel, Bars, Forgings, and Tubing 0.80CR-1.8NI-0.25MO (0.38-0.43C) (SAE4340)
• SAE-AMS6448 – Stee Bars, Forgings, and Tubing 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150)
• SAE-AMS-H-6088 – Heat Treatment of Aluminum Alloys (No S/S Document)
• SAE-AMS-H-6875 – Heat Treatment of Steel Raw Materials
• SAE-AMS-H-81200 – Heat Treatment of Titanium and Titanium Alloys
• SAE-AMS-STD-182 – IDENTIFICATION MARKING OF NICKEL AND NICKEL BASE ALLOYS, CONTINUOUS (S/S BY SAE-AMS2806 AND SAE-AMS2807)
• SAE-AMS-STD-184 – Identification Marking of Aluminum, Magnesium and Titanium (No S/S Document)
• SAE-AMS-STD-185 – IDENTIFICATION MARKING OF COPPER AND COPPER BASE ALLOY MILL PRODUCTS
• SAE-AMS-STD-66 – Steel: Chemical Composition and Hardenability (S/S by SAE-AIR4127)
• SAE-ARP1331 – Chemical, The Milling Process
• SAE-ARP1512 – Corrosion of Aluminum Alloys by Aircraft Maintenance Chemicals, Sandwich Test (S/S by ASTM-F1110)
• SAE-ARP1704 – BAR FRACTURE TOUGHNESS OF METALLIC MATERIALS, SHORT, DETERMINATION OF (NO S/S DOCUMENT)