FSC-9535: Plate, Sheet, Strip, and Foil; Nonferrous Base Metal

Documents

• QQ-A-250/7 – Aluminum Alloy 5086, Plate and Sheet (See Notice 3 for Replacement Information)
• QQ-A-250/8 – Aluminum Alloy 5052, Plate and Sheet (See Notice 3 for Replacement Information)
• QQ-A-250/9 – Aluminum Alloy 5456, Plate and Sheet (See Notice 3 for Replacement Information)
• QQ-A-255 – ALUMINUM ALLOY PLATES AND SHEETS ALCLAD 2014 (R301,CLAD 14S) (S/S BY QQ-A-250/3)
• QQ-A-283 – Aluminum Alloy Plate and Sheet 7075 (S/S by QQ-A-250/12)
• QQ-A-287 – Aluminum  Alloy Plate and Sheet,  ALCLAD 7075 (S/S by QQ-A-250/13B)
• QQ-A-318 – Aluminum Alloy Plate and Sheet 5052 (S/S by QQ-A-250/8)
• QQ-A-327 – Aluminum Alloy Plate and Sheet 6061 (S/S by QQ-A-250/11)
• QQ-A-355 – Aluminum Alloy, Plate and Sheet 2024 (S/S by QQ-A-250/4)
• QQ-A-359 – ALUMINUM ALLOY PLATE AND SHEET 3003
• QQ-A-361 – ALUMINUM-ALLOY (ALUMINUM-SURFACED) (AL-17C2), (ALUMINUM-COPPER-MAGNESIUM-MANGANESE); PLATES, SHEETS, AND STRIPS (S/S BY QQ-A-362)
• QQ-A-362 – Aluminum Alloy Plate and Sheet, Alclad 2024 (S/S by QQ-A-250/5)
• QQ-A-435 – Aluminum Alloy Sheet, Painted (for Exterior Use) (No S/S Document)
• QQ-A-561 – Aluminum Alloy Plate and Sheet, 1100 (S/S by QQ-A-250/1)
• QQ-A-620 – Aluminum Bronze, Plate, Bar, Sheet, and Strip  (S/S by QQ-C-450)
• QQ-B-667 – Bronze, Aluminum, Plate, Rolled Bar, Sheet, and Strip (S/S by QQ-A-620)
• QQ-B-721 – Bronze, Manganese; Bars, Forgings, Plates, Rods, and Shapes (S/S by QQ-M-80)
• QQ-C-533 – Copper-Beryllium Alloy Strip (Copper Numbers 170 and 172) (S/S by ASTM-B194)
• QQ-L-201 – Lead Sheet
• QQ-M-44 – Magnesium Alloy Plate and Sheet ( AZ31B)  (S/S byAMS4375, AMS4377 and AMS4376)
• QQ-M-54 – Magnesium Alloy (1.5 Manganese); Plate and Sheet (S/S by QQ-M-44)
• QQ-M-80 – MANGANESE BRONZE BARS, PLATES, RODS, SHEETS, STRIPS, FLAT WIRE, FORGINGS, AND STRUCTURAL AND SPECIAL SHAPED SECTIONS (S/S BY QQ-B-728)
• QQ-N-281 – Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip Wire, Forgings, and Structural and Special Shaped Sections
• QQ-N-30 – Naval Brass; Plate, Rolled Bar, Sheet and Strip (S/S by QQ-B-639)
• QQ-T-25 – TAPE, ELECTRIC WIRE-FLEXIBLE INSULATING SLEEVING MARKING MACHINE, (FOIL, WIRE IDENTIFICATION, MARKING) (USE MIL-M-81594)
• QQ-Z-100 – Zinc Alloy Sheet and Strip (No S/S Document)
• QQ-Z-301 – ZINC SHEET AND STRIP (S/S BY ASTM-B69)
• SAE-AMS2262 – Tolerances Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip, and Plate
• SAE-AMS4000 – Aluminum Sheet and Plate (1060-0)
• SAE-AMS4003 – Aluminum Alloy, Sheet and Plate 0.12 Cu (1100-H14) Strain Hardened (No S/S Document)
• SAE-AMS4009 – Aluminum Alloy Foil 1.0MG - 0.6SI - 0.30CU - 0.20CR (6061-0) Annealed
• SAE-AMS4010 – Aluminum Alloy Foil 1.2MN - 0.12CU (3003-H18) (No S/S Document)
• SAE-AMS4012 – Aluminum Sheet, Laminated Edge Bonded
• SAE-AMS4018 – ALUMINUM ALLOY, SHEET AND PLATE 3.5MG - 0.25CR (554-01) (NO S/S DOCUMENT)
• SAE-AMS4021 – Aluminum Alloy, Alclad Sheet and Plate 1.0MG - 0.60SI - 0.28CU - 0.20CR (Alclad 6061-0) Annealed
• SAE-AMS4022 – Aluminum Alloy Sheet and Plate, Alclad 1.0MG - 0.60SI - 0.28CU - 0.20CR (Alclad 6061; -T4 Sheet, -T451 Plate) (No S/S Document)
• SAE-AMS4023 – Aluminum Alloy Sheet and Plate, Alclad 1.0MG - 0.60SI - 0.28CU - 0.20CR (Alclad 6061; -T6 Sheet, -T651 Plate)
• SAE-AMS4026 – Aluminum Alloy Sheet and Plate 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T4 Sheet, -T451 Plate) Solution Heat Treated and Naturally Aged
• SAE-AMS4027 – Aluminum Alloy, Sheet and Plate, 1.0MG - 0.60SI - 0.28CU - 0.20CR, (6061; -T6 Sheet, - T651 Plate) Solution and Precipitation Heat Treated
• SAE-AMS4029 – Aluminum Alloy Sheet and Plate (2014: - T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated
• SAE-AMS4036 – Aluminum Alloy Sheet and Plate, Alclad One Side 4.4Cu - 1.5Mg - 0.60Mn Alclad One Side 2024 and 1-1/2% Alclad One Side 2024-T351 Plate
• SAE-AMS4037 – Aluminum Alloy Sheet and Plate 4.4CU - 1.5MG - 0.60MN (2024;-T3 Flat Sheet, -T351 Plate) Solution Heat Treated
• SAE-AMS4045 – Aluminum Alloy Sheet and Plate, 5.6ZN - 2.5MG - 1.6CU - 0.23CR, 7075: (-T6 Sheet, - T651 Plate) Solution and Precipitation Heat Treated
• SAE-AMS4049 – Aluminum Alloy Sheet and Plate, Alclad 5.6ZN-2.5MG-1.6CR-0.23CR (Alclad 7075; -T6 Sheet-T651 Plate) Solution and Precipitation Heat Treated
• SAE-AMS4050 – ALUMINUM ALLOY PLATE 6.2ZN - 2.3CU - 2.2MG - 0.12ZR - (7050-T7451) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED
• SAE-AMS4064 – Aluminum Alloy Sheet, Clad Two Sides 1.25MN - 0.12CU (NO. 12-0 Brazing sheet) Annealed
• SAE-AMS4084 – Aluminum Alloy Sheet 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T61) Solution and Precipitation Heat Treated
• SAE-AMS4085 – ALUMINUM ALLOY SHEET 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T761) SOLUTION HEAT TREATED AND OVERAGED
• SAE-AMS4089 – Aluminum Alloy Plate 5.7zn - 2.2mg - 1.6cu - 0.22cr (7479-t7651) Solution Heat Treated, Stress Relieved By Stretching, And Precipitation Heat Treated
• SAE-AMS4090 – Aluminum Alloy Plate 5.7zn - 2.2mg - 1.6cu - 0.22cr (7475-t651) Solution Heat Treated, Stress Relieved, And Precipitation Heat Treated
• SAE-AMS4100 – Aluminum Alloy Sheet, Alclad 5.7zn - 2.2mg - 1.6cu - 0.22cr (Alc 7475-t761) Solution And Precipitation Heat Treated
• SAE-AMS4200 – Aluminum Alloy Plate 7.7zn - 2.4mg - 1.6cu - 0.16cr (7049-t7351) Solution Heat Treated, Stress Relieved, And Precipitation Heat Treated
• SAE-AMS4201 – Aluminum Alloy Plate 6.2zn - 2.3cu - 2.2mg - 0.12zr (7075-t7651) Solution Heat Treated, Stress Relieved, And Overaged
• SAE-AMS4202 – Aluminum Alloy Plate 5.7zn - 2.2mg - 1.6cu - 0.22cr (7475-t7351) Solution Heat Treated, Stress Relieved By Stretching, And Precipitation Heat Treated
• SAE-AMS4203 – ALUMINUM ALLOY PLATE 6.2ZN - 1.8CU - 2.4MG - 0.13ZR (7010-T7351) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED
• SAE-AMS4204 – ALUMINUM ALLOY PLATE 6.2ZN - 1.8CU - 2.4MG - 0.13ZR (7010-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED
• SAE-AMS4205 – ALUMINUM ALLOY PLATE 6.2ZN - 1.8CU - 2.4MG - 0.13ZR (7010-T73651) OR (7010-T7451) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED
• SAE-AMS4207 – ALUMINUM ALLOY SHEET, ALCLAD 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T61) SOLUTION AND PRECIPITATION HEAT TREATED
• SAE-AMS4259 – Aluminum Alloy Sheet 2.4LI - 1.3CU - 0.95MG - 0.10ZR (8090-T6) Solution and Precipitation Heat Treated (Unrecrystallized)
• SAE-AMS4270 – Aluminum Alloy, Alclad Sheet 4.1CU - 1.4MG - 0.45MN Alclad 2424-T3 Flat Sheet Solution Heat Treated and Cold Worked
• SAE-AMS4308 – Aluminum Alloy, Sheet 8.6FE - 1.8SI - 1.3V (8009-H112) Powder Metallurgy Product, Strain Hardened
• SAE-AMS4375 – SHEET AND PLATE, MAGNESIUM ALLOY 3.0AL - 1.0ZN - 0.20MN (AZ31B-0) ANNEALED AND RECRYSTALLIZED
• SAE-AMS4376 – PLATE, MAGNESIUM ALLOY 3.0AL - 1.0ZN - 0.20MN (AZ31B-H26) COLD ROLLED AND PARTIALLY ANNEALED
• SAE-AMS4377 – SHEET AND PLATE, MAGNESIUM ALLOY 3.0AL - 1.0ZN - 0.20MN (AZ31B-H24) COLD ROLLED, PARTIALLY ANNEALED
• SAE-AMS4383 – SHEET AND PLATE, MAGNESIUM ALLOY 2.0TH - 0.78MN (HM21A-T81) SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED (NO S/S DOCUMENT)
• SAE-AMS4386 – Magnesium Alloy Sheet and Plate 14LI - 1.25AL (LA 141A-T7) (No S/S Document)
• SAE-AMS4390 – SHEET AND PLATE, MAGNESIUM ALLOY 2.0TH - 0.78MN (HM21A-T8) SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED (NO S/S DOCUMENT)
• SAE-AMS4500 – Copper, Sheet, Strip, and Plate Soft Annealed
• SAE-AMS4505 – Copper Alloy (Brass), Sheet, Strip, and Plate 70Cu - 30Zn Annealed (OS035)
• SAE-AMS4507 – Copper Alloy (Brass), Sheet, Strip, and Plate 70CU - 30ZN Half Hard (H02)
• SAE-AMS4911 – Titanium Alloy, Sheet, Strep, and Plate 6AL-4V Annealed
• SAE-AMS5540 – Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 74Ni - 15.5Cr - 8.0Fe Annealed
• SAE-AMS5553 – Nickel, Sheet and Strip Low (0.02 MAX) Carbon Annealed
• SAE-AMS5701 – Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Flash Welded Rings and Forging Stock 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode Remelted or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated
• SAE-AMS5865 – Nickel, Corrosion and Heat Resistant, Sheet and Strip Thoria Dispersion Strengthened 2.2TH02 (No S/S Document)
• SAE-AMS6356 – Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo - (0.30 - 0.35C)(SAE 4132)
• SAE-AMS7701 – Nickel-Iron Alloy, Magnetic, Sheet and Strip Annealed (See Notice of Withdrawal for Replacement Information)
• SAE-AMS7702 – Nickel-Iron Alloy, Magnetic, Sheet and Strip Cold Rolled, Half Hard Temper (See Notice of Withdrawal for Replacement Information)
• SAE-AMS7705 – Bars and Forgings, Nickel-Iron Magnetic Alloy (See Notice of Withdrawal for Replacement Information)
• SAE-AMS7717 – Nickel-Iron Alloy, Magnetic, Sheet and Strip, 50NI - 50FE Annealed, Forming Grade
• SAE-AMS7718 – Nickel-Iron Alloy, Magnetic, Bars, Rods, Tubing, and Forgings 50NI – 50FE
• SAE-AMS7719 – Nickel-Iron Alloy, Magnetic, Sheet and Strip 50Ni - 50Fe Stamping Quality, Half-Hard Temper
• SAE-AMS7721 – Lead Alloy Sheet and Extrusions 93PB - 6.5SB - 0.50SN as Fabricated
• SAE-AMS7791 – ALLOY SHEET AND STRIP, MAGNETIC, 50NI - 50FE - STAMPING QUALITY (NO S/S DOCUMENT)
• SAE-AMS7913 – Aluminum-Beryllium Alloy, Sheet and Plate 38A1-62BE
• SAE-AMS-A-81596 – Aluminum Foil For Sandwich Construction
• SAE-AMS-B-8964 – Beryllium Sheet and Plate, General Requirements for (S/S by SAE-AMS7902)
• SAE-AMS-DTL-22499 – Shim, Stock, Laminated
• SAE-AMS-DTL-22499/1 – Shim Stock, Laminated, Aluminum Alloy
• SAE-AMS-DTL-22499/2 – Shim Stock, Laminated, Brass
• SAE-AMS-H-7199 – Heat Treatment Of Wrought Copper-Beryllium Alloys, Process For (Copper Alloys: Numbers C17000, C17200, C17300, C17500, And C17510)
• SAE-AMS-QQ-A-250 – Aluminum and Aluminum Alloy, Plate and Sheet
• SAE-AMS-QQ-A-250/1 – Aluminum 1100, Plate and Sheet (No S/S Document)
• SAE-AMS-QQ-A-250/10 – Aluminum Alloy 5454, Plate and Sheet (No S/S Document)
• SAE-AMS-QQ-A-250/11 – Aluminum Alloy 6061, Plate and Sheet (No S/S Document)
• SAE-AMS-QQ-A-250/12 – Aluminum Alloy 7075, Plate and Sheet
• SAE-AMS-QQ-A-250/13 – Aluminum Alloy Alclad 7075, Plate and Sheet (S/S by SAE-AMS4049)
• SAE-AMS-QQ-A-250/14 – Aluminum Alloy 7178, Plate and Sheet
• SAE-AMS-QQ-A-250/15 – Aluminum Alloy Alclad 7178, Plate and Sheet
• SAE-AMS-QQ-A-250/18 – Aluminum Alloy, Alclad One Side 7075, Plate and Sheet