FSC-9530: Bars and Rods, Nonferrous Base Metal

Documents

• ASTM-B124-B124M – Copper and Copper Alloy Forging Rod, Bar, and Shapes
• ASTM-B133 – Copper Rod, Bar and Shapes (S/S by ASTM-B187/B187M)
• ASTM-B133M – COPPER ROD, BAR, AND SHAPES (METRIC) (S/S BY ASTM-B187/B187M)
• ASTM-B138 – ROD, MANGANESE BRONZE, BAR, AND SHAPES (NO S/S DOCUMENT)
• ASTM-B138M – ROD, BAR, AND SHAPES (METRIC), MANGANESE BRONZE (NO S/S DOCUMENT)
• ASTM-B139-B139M – Rod, Phosphor Bronze, Bar, and Shapes
• ASTM-B140-B140M – Cooper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bars, and Shapes
• ASTM-B150 – ALUMINUM BRONZE ROD, BAR, AND SHAPES (NO S/S DOCUMENT)
• ASTM-B150M – ALUMINUM BRONZE, ROD, BAR, AND SHAPES (METRIC) (NO S/S DOCUMENT)
• ASTM-B151 – ALLOY, (NICKEL SILVER) COPPER-NICKEL-ZINC AND COPPER-NICKEL ROD AND BAR (NO S/S DOCUMENT)
• ASTM-B151M – ROD AND BAR, COPPER-NICKEL-ZINC ALLOY (NICKEL SILVER) AND COPPER-NICKEL (METRIC) (NO S/S DOCUMENT)
• ASTM-B164 – Rod, Bar, and Wire, Nickel-Copper Alloy
• ASTM-B166 – Nickel-Chromium-Iron Alloys (UNS N06600, N06601,N06603, N06690, N06693, N06025, and N06045)* and Nickel-Chromium-Colbalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire
• ASTM-B16-B16M – Rod, Brass, Free-Cutting, Bar and Shapes for use in Screw Machines
• ASTM-B196-B196M – Rod and Bar, Copper-Beryllium Alloy
• ASTM-B211 – Aluminum and Aluminum-Alloy Bar, Rod, And Wire
• ASTM-B211-B211M – Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
• ASTM-B211M – Aluminum and Aluminum-Alloy Bar, Rod, and Wire (Metric)
• ASTM-B21-B21M – Rod, Bar, and Shapes, Naval Brass
• ASTM-B21M – ROD, NAVAL BRASS, BAR, AND SHAPES (METRIC), STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)
• ASTM-B221 – Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
• ASTM-B221M – Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)
• ASTM-B236M – Aluminum Bars for Electrical Purposes (Bus Bars) (Metric)
• ASTM-B248 – Copper, Wrought and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar, General Requirements for
• ASTM-B248M – Plate, Wrought Copper and Copper-Alloy, Sheet, Strip and Rolled Bar (Metric)
• ASTM-B249-B249M – Copper and Copper-Alloy, Wrought, Rod, Bar Shapes and Forgings, General Requirements for
• ASTM-B301-B301M – Copper Rod, Bar, Wire, and Shapes, Free - Cutting
• ASTM-B317 – ALUMINUM-ALLOY EXTRUDED BAR, ROD, TUBE, PIPE, AND STRUCTURAL PROFILES FOR ELECTRICAL PURPOSES (BUS CONDUCTOR)
• ASTM-B335 – Alloy Rod, Nickel - Molybdenum
• ASTM-B348-B348M – Standard Specification for Titanium and Titanium Alloy Bars and Billets
• ASTM-B371 – Rod, Copper-Zinc-Silicon Alloy (S/S by ASTM-B371/B371M)
• ASTM-B371-B371M – Standard Specification for Copper-Zinc-Silicon Alloy Rod
• ASTM-B411-B411M – Copper-Nickel-Silicon Alloy Rod and Bar
• ASTM-B441 – Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS NOS. C17500, C17510, and C17465)
• ASTM-B446 – Rod and Bar, Nickel - Chromium - Molybdenum - Columbium Alloy (UNS N06625), Nickel - Chromium - Molydenum - Silicon Alloy (UNS N06219), and Nickel - Chromium - Molybdenum - Tungsten Alloy (UNS N06650)
• ASTM-B453-B453M – Copper Zinc Lead Alloy (Leaded Brass) Rod, Bar, and Shapes
• ASTM-B98-B98M – Copper-Silicon Alloy Rod, Bar, and Shapes
• ASTM-C393 – PROPERTIES, FLEXURAL OF FLAT SANDWICH CONSTRUCTIONS
• ASTM-D647 – Molds for Test Specimens of Plastic Molding Materials, Design of (No S/S Document)
• ASTM-G28 – Alloys, Nickel - Rich, Chromium - Bearing, Detecting Susceptibility to Intergranular Corrosion in Wrought
• MIL-A-10936 – Aluminum Base Alloy, Sand Castings (No S/S Documents)
• MIL-A-15939 – Aluminum Bronze Bars, Plates, Rods, Sheets, Strips, Forgings, and Structural and Special Shaped Sections (use QQ-A-620 and QQ-A-630)
• MIL-A-18593 – Aluminum Alloy Bars, Rods, and Structural and Special Shaped Sections-Extruded, 6063 (63S) (S/S by QQ-A-274)
• MIL-A-19005 – Aluminum Alloy Bar, Rod and Structural and Special Shaped Section-Extruded, 5083(K--183) (use QQ-A-200/4)
• MIL-A-21170 – Aluminum Alloy Bar, Rod, and Structuralshaped Sections-Rolled or Extruded, 5456
• MIL-A-21579 – Aluminum Alloy Bars, Rods, and Structural Shapes-Rolled or Extruded, 5086
• MIL-A-21599 – Aluminum Alloy Bars, Rods, and Structural Shapes-ROLLED or Extruded, 5454
• MIL-A-22152 – Aluminum Alloy Sand Castings Heat Treatment Processes of (use MIL-H-6088)
• MIL-A-25493 – Aluminum Alloy Bars, Rods, and Shapes, Extruded, 6066
• MIL-A-46104 – Aluminum Alloy Bar, Rod, Shapes, and Tube, Extruded, 6070 (S/S by ASTM-B221 and ASTM-B221M)
• MIL-A-63547 – Aluminum Alloy 7475, Rod (No S/S Document)
• MIL-A-8825 – Aluminum Alloy Bars and Shapes, Extruded, 7079 (S/S by QQ-A-200/12)
• MIL-A-9186 – Aluminum Alloy Bars, Rods and Shapes, Extruded, 7178 (S/S by QQ-A-200/13)
• MIL-B-16033 – Bronze, Aluminum, Castings (Use QQ-C-390)
• MIL-B-16166 – Bronze, Aluminum, Forgings, Heat Treated (No S/S Document)
• MIL-B-16444 – Bronze, Hydraulic (Ounce Metal). Casting (Use QQ-C-390)
• MIL-B-19231 – Bars, Copper, Silver-Bearing (for Commutators)
• MIL-B-24059 – Bronze, Nickel Aluminum; Rod, Flat Products with Finished Edges, Shapes and Forgings (S/S by QQ-C 00465B
• MIL-B-6946 – Bronze, Aluminum, Bar and Rod (Use QQ-B-679)
• MIL-C-19311 – Copper Chromium Alloy Forgings, Wrought Rod, Bar, and Strip (Copper Alloy Numbers 182, 184, and 185)
• MIL-C-21657 – Copper-Beryllium Alloy, Low Magnetic Effect (for Special Purpose Tools and Equipment) (No S/S Document)
• MIL-C-22032 – Cobalt-Chromium-Tungsten-Nickel Alloy, Bar Plate and Sheet, Low Magnetic Effect (for Special Purpose Tools and Equipment)
• MIL-C-22226 – Copper-Nickel-Manganese Alloy Bars, Plates, and Sheets, Low Magnetic Effect (For Special Purpose Tools and Equipment)
• MIL-C-24111 – Chromium-Nickel Alloy Steel Bars, rods and Forgings, Corrosion Resistant (No S/S Document)
• MIL-C-46029 – Coper-Titanium Alloy Plate, Bar, Sheet and Strip (No S/S Document)
• MIL-C-50 – Copper Alloy Number 260 (Cartridge Brass, 70 Percent); Sheet, Strip, Plate, Bar, and Discs (S/S by ASTM-B19)
• MIL-C-50709 – Copper-Base Sintered Bars (Oil Impregnated) (S/S by ASTM-B438)
• MIL-C-895 – Commercial Brass Bars, Plates, Rods, Shapes, Sheets, Strips, Flat Wire and Forgings (Navy) (Use QQ-B-613 or QQ-B-626 as Applicable)
• MIL-C-947 – Copper-Beryllium-Alloy: Bars, Rods, Plates, Strips, and Wire (S/S by QQ-C-530 and QQ-C-533)
• MIL-D-18047 – Aluminum Alloy Bars, Rods,and Structural and Special Shaped Sections-Extruded, 6063 (63S) (S/S by QQ-A-274)
• MIL-DTL-24106 – Nickel-Copper Alloy Bars, Rods, and Forgings (UNS N04400)
• MIL-DTL-24114 – Nickel-Chromium-Iron Age-Hardenable Alloy Bars, Rods, and Forgings (UNS N07750)
• MIL-DTL-24252 – Cobalt-Chromium-Tungsten-Nickel Alloy (UNS R30605) and Cobalt-Chromium-Tungsten Alloy (UNS R30016) Bars and Forgings
• MIL-DTL-24492 – Nickel-Chromium-Iron-Niobium Age-Hardenable Alloy, Bars, Reforging Stock, and Forgings (UNS N07718)
• MIL-DTL-24527 – Chromium-Nickel Alloy Steel Bars and Forgings, Corrosion-Resistant, Precipitation Hardening (UNS S17400)
• MIL-DTL-24549 – Nickel-Copper-Aluminum Age Hardenable Alloy, Bars (UNS N05500)
• MIL-DTL-24799 – Nickel-Chromium-Molybdenum-Niobium Age-Hardenable Alloy, Bars and Forgings (UNS N06625)
• MIL-DTL-24801 – Nickel-Chromium-Iron Alloy, Bars and Forgings (UNS N06690)
• MIL-DTL-32477 – Rod and Bar, Cobalt-Nickel-Chromium-Iron-Molybdenum Alloy, for use in Critical Seawater Applications
• MIL-DTL-32528 – Rod, Bar, and Billet, Titanium Alloy TI-5111 for Use in Critical Seawater Application
• MIL-F-83142 – Forging, Titanium Alloys, Premium Quality (See Notice 5 for Replacement Information)
• MIL-H-23191 – Hafnium Wrought Products (for Official Use Only)
• MIL-M-14582 – Molybdenum Rod, Wire, Sheet, and Strip (No S/S Document)
• MIL-M-26696 – Magnesium Alloy Bar, Rod, and Special Shaped Sections Extruded, (P)ZK60B (No S/S Document)
• MIL-M-46039 – Magnesium Alloy Bar, Rod, and Special Shaped Sections, Extruded (ZK21A) (S/S by SAE-AMS4387)
• MIL-M-8916 – Magnesium Alloy Bar, Rod, and Special Shaped Sections, Extruded (HM31A-T5) (S/S by SAE-AMS4389)
• MIL-N-15721 – NICKEL-CHROMIUM ALLOY BARS AND RODS (BOILER REFRACTORY ANCHOR BOLTS) (S/S BY MIL-B-15382)
• MIL-N-6710 – Nickel Chromium Iron Alloy, Bars, Rods and Forgings (See ASTM-B166 and ASTM-B564)
• MIL-N-8550 – NICKEL ALLOY, BARS, AND FORGINGS, 1,200 DEG. F TO 1,500 DEG. F OPERATING TEMPERATURES (NO S/S DOCUMENT)
• MIL-STD-412 – Alloy Designation System for Titanium (No S/S Document)
• MIL-T-14557 – TITANIUM AND TITANIUM ALLOY, WROUGHT, BARS, FORGINGS AND FORGING STOCK (USE MIL-T-9047)
• MIL-T-46038 – TITANIUM ALLOY, WROUGHT, RODS, BARS, AND BILLETS (FOR CRITICAL APPLICATIONS) (NO S/S DOCUMENT)
• MIL-T-9047 – TITANIUM AND TITANIUM ALLOY BARS (ROLLED OR FORGED) AND REFORGING STOCK, AIRCRAFT QUALITY (S/S BY SAE-AMS-T-9047)
• MIL-U-46045 – URANIUM ALLOY, WROUGHT, BARS, BILLETS, AND TUBULAR SHAPES (NO S/S DOCUMENT)
• MIL-Z-883 – ZINC: PLATES, RODS, SHEETS AND STRIPS (S/S BY QQ-Z-301 AND MIL-A-18001)
• MS14245 – BAR, OCTAGONAL, ALUMINUM ALLOY 2024 (NO S/S DOCUMENT)
• MS14246 – BAR, HEXAGONAL, ALUMINUM ALLOY 2014 (NO S/S DOCUMENT)
• MS14247 – BAR, HEXAGONAL, ALUMINUM ALLOY 2024 (NO S/S DOCUMENT)
• MS14248 – BAR, HEXAGONAL, ALUMINUM ALLOY 6061 (NO S/S DOCUMENT)
• MS14249 – BAR, HEXAGONAL, ALUMINUM ALLOY 7075 (NO S/S DOCUMENT)