FSC-9510
FSC-9510: Bars and Rods
Documents
- ASTM-A108 – Steel Bars, Carbon, Cold Finished, Standard Quality
- ASTM-A184-A184M – Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
- ASTM-A193-A193M – Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
- ASTM-A276 – Steel Bars and Shapes, Stainless
- ASTM-A29-A29M – Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
- ASTM-A304 – Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
- ASTM-A306 – BAR, CARBON STEEL, SUBJECT TO MECHANICAL PROPERTY REQUIREMENTS (USE ASTM A663-72 & A675-72)
- ASTM-A322 – Steel Bars, Alloy, Standard Grades, Standard Specification for
- ASTM-A331 – Steel Bars, Alloy, Cold-Finished (S/S by ASTM-A108)
- ASTM-A434 – Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
- ASTM-A479-A479M – Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
- ASTM-A484-A484M – Steel, Bars, Billets and Forgings, Stainless
- ASTM-A493 – Steel Wire and Wire Rods for Cold Heading and Cold Forging, Stainless
- ASTM-A499 – Steel Bars and Shapes, Carbon Rolled from "T" Rails
- ASTM-A561 – Steel Bars, Tool, Macrotech Testing of
- ASTM-A575 – Steel Bars, Carbon, Merchant Quality, M-Grades, Standard Specification for
- ASTM-A576 – Steel Bars, Carbon, Hot-Wrought, Special Quality, Standard Specification for
- ASTM-A582-A582M – Bars, Free-Machining Stainless Steel
- ASTM-A600 – Tool Steel High Speed, Standard Specification for
- ASTM-A616-A616M – Bars, Rail-Steel Deformed and Plain, for Concrete Reinforcement (No S/S Document)
- ASTM-A617-A617M – Bars, Axle-Steel Deformed and Plain, for Concrete Reinforcement (No S/S Document)
- ASTM-A663-A663M – Steel Bars, Carbon, Merchant Quality, Mechanical Properties
- ASTM-A675-A675M – Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
- ASTM-A681 – Tool Steels Alloy, Standard Specification for
- ASTM-A685 – BAR, MACHINED FLAT & SQUARE TOOL STEEL (SEE NOTICE 2 FOR REPLACEMENT INFORMATION)
- ASTM-A686 – Tool Steel, Carbon, Standard Specification for
- ASTM-A695 – STEEL BARS, CARBON, HOT-WROUGHT, SPECIAL QUALITY, FOR FLUID POWER APPLICATIONS (NO S/S DOCUMENT)
- ASTM-A696 – Steel Bars, Carbon, Hot - Wrought or Cold - Finished, Special Quality, for Pressure Piping Components
- ASTM-A739 – Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
- ASTM-A767-A767M – Bars, Steel, Zinc-Coated (Galvanized), for Concrete Reinforcement
- ASTM-B472 – Billets and Bars, Nickel Alloy Reforging, Standard Specification for
- ASTM-B574 – Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel- Molybdenum-Chromium - Tantalum, Low-Carbon Nickel-Chromium - Molybdenum-Copper, and Low-Carbon Nickel - Chromium-Molybdenum-Tungsten
- ASTM-E1019 – Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys, by Various Combustion and Fusion Techniques, Determination of
- FED-STD-00133 – CONTINUOUS IDENTIFICATION MARKING OF IRON AND STEEL PRODUCTS,
- FED-STD-00152 – Steel Bar, Hot Rolled (Including Bar Size Shapes)
- MIL-A-47182 – Alloy, Ferromagnetic, Vacuum Melt (Cobalt Vanadium) (No S/S Document)
- MIL-A-47227 – Alloy (Iron-Nickel), Ferromagnetic, Sintered, Parts
- MIL-B-11595 – Bar, Metal and Blanks, Steel (Under 2 Inches in Diameter) for Barrels of Small Arms Weapons (No S/S Document)
- MIL-B-12504 – Bar, Metal and Wire (Nonelectrical), Carbon and Alloy Steel, Cold Drawn for AP Bullet Cores and Shot
- MIL-C-11926 – Cannon, 90MM Gun: M54 (No S/S Document)
- MIL-C-12668 – Cannon,120MM Gun: M58 (No S/S Document)
- MIL-DTL-16598 – Steel Bar (Low Expansion, Free Cutting, 36 Percent Nickel)
- MIL-DTL-23195 – Steel Bars and Forgings, Corrosion Resistant (UNS S30400/S30403, S31600/S31603, S34700, and S34800)
- MIL-DTL-24128 – Low Carbon Chromium Steel Bars and Forgings
- MIL-DTL-24528 – Steel Bars and Forgings, Nickel-Chromium-Molybdenum (UNS G43406) and Chromium-Molybdenum-Vanadium (UNS K14675)
- MIL-DTL-24538 – Steel Bars and Forgings: High Carbon, Martensitic, Corrosion Resisting (UNS S44002 and UNS S44004)
- MIL-I-11695 – Iron, Magnetic, Bar, Sheet and Strip (S/S by ASTM-A848)
- MIL-I-50711 – Iron-Base Sintered Metal Bars (Oil Impregnated) (S/S by ASTM-B328)
- MIL-N-3182 – NICKEL-MOLYBDENUM ALLOY STEEL FORGINGS AND BARS
- MIL-R-5699 – RODS, NICKEL-CHROMIUM-BORON ALLOY WELDING
- MIL-S-11310 – Steel Bars, Carbon, Hot Rolled, for Cold Shaping Including Cold Extrusion (Future Acquisition may refer to ASTM-A29/A29M and SAE-J4030
- MIL-S-13040 – STEEL BARS AND TUBES FOR PISTON RODS AND CYLINDERS FOR HYDRO-PNEUMATIC RECOIL MECHANISMS AND EQUILIBRATORS.
- MIL-S-13336 – STEEL BARS, HEAT RESISTANT (27% CHROMIUM)
- MIL-S-13433 – STEEL BARS, CARBON (LEADED, HIGH SULFUR) (S/S BY QQ-S-637)
- MIL-S-13502 – STEEL, CARBON, ORD 1050 MODIFIED, BARS AND SHAPES
- MIL-S-15046 – STEEL, TOOL, HIGH-SPEED (USE QQ-T-590)
- MIL-S-15852 – STEEL, TOOL, HIGH-CARBON HIGH-CHROMIUM
- MIL-S-16124 – STEEL, FREE CUTTING, COLD DRAWN BARS (PEARLITIC MANGANESE) (NO S/S DOCUMENT)
- MIL-S-16598 – Steel Bar (Low Expansion, Free Cutting, 36 Percent Nickel).
- MIL-S-16782 – STEEL, MACHINERY, COLD-ROLLED OR COLD DRAWN, BARS AND RODS (USE QQ-S-633)
- MIL-S-16783 – STEEL BAR, ALLOY (COLD FINISHED PROJECTILE STOCK)
- MIL-S-17758 – STEEL BAR AND STEEL FORGING, NICKEL MODIFIED HADFIELD AND NICKEL-MOLYBDENUM MODIFIED HADFIELD
- MIL-S-18170 – STEEL BARS AND FORGINGS, CORROSION RESISTING, RADIOACTIVE SYSTEM SERVICE
- MIL-S-18411 – STEEL BARS, CARBON, COLD FINISHED, FREE MACHINING (USE QQ-S-637)
- MIL-S-18732 – Steel Bars, Wire, Forging Stock, Forgings Tubing (431), Special Quality
- MIL-S-19697 – STEEL, TOOL, COPPER ALLOY, NON TEMPERING (S/S BYASTM-A681)
- MIL-S-20137 – STEEL BAR, ROLLED, HEAT TREATED (SHAFTING) (S/S BY MIL-S-23284)
- MIL-S-20671 – STEEL BONE PLATES AND SCREWS, SHERMAN
- MIL-S-21156 – STEEL BARS, HEAT TREATED (FOR 20MM AND 30MM AIRCRAFT GUN BARRELS (NO S/S DOCUMENT)
- MIL-S-21952 – Steel (HY-80 and HY-100) Bars, Alloy (See Notice 2 for Replacement Information)
- MIL-S-23372 – STEEL BAR (4.2 PERCENT SILICON) VACUUM MELTED (ELECTRICAL)
- MIL-S-23966 – STEEL BAR, BILLETS AND FORGINGS, ALLOY NITRIDING APPLICATION (USE MIL-S-869)
- MIL-S-24502 – Steel, Choromium- Molybdenum-Vanadium Bars
- MIL-S-3917 – Steel, Bar, Carbon, Free Cutting (S/S by ASTM-A108)
- MIL-S-43 – Steel Bars for Projectile Stock (No S/S Document)
- MIL-S-46033 – STEEL BARS, CARBON AND ALLOY, ROUND, SQWARE, AND FLAT (FOR SPRINGS) (S/S BY ASTM-A29/A29M)
- MIL-S-46042 – STEEL, CORROSION AND HEAT RESISTANT BAR AND FORGINGS (NO S/S DOCUMENT)
- MIL-S-46047 – Steel, Bars and Blanks (1-3/4 Inches and over in Diameter) for Barrels of Small Arms Weapons
- MIL-S-46070 – Steel Bar for Projectile Stock (No S/S Document)
- MIL-S-46123 – STEEL BAR, HOLLOW BAR, WIRE AND FORGINGS CORROSION AND HEAT RESISTANT (NO S/S DOCUMENT)
- MIL-S-46128 – STEEL, ALLOY, BARS (V-MODIFIED 4330) FOR CRITICAL APPLICATION (NO S/S DOCUMENT)
- MIL-S-47036 – STEEL, ALLOY, HIGH STRENGTH (NO S/S DOCUMENT)
- MIL-S-47085 – STEEL - RELAY SILICON, ELECTRICAL, BAR (NO S/S DOCUMENT)
- MIL-S-47086 – STEEL, CHROMIUM-VANADIUM ALLOY (NO S/S DOCUMENT)
- MIL-S-47139 – STEEL, BAR, PLATE, SHEET, STRIP, FORGINGS, AND EXTRUSIONS, MARAGING, 18 PERCENT NICKEL (NO S/S DOCUMENT)
- MIL-S-47262 – STEEL, ALLOY, TYPE AISI-H-11 (MODIFIED) (NO S/S DOCUMENT)
- MIL-S-5000 – STEEL, CHROME-NICKEL-MOLYBDENUM (4340) BARS, AND FORGING STOCK (S/S BY SAE-AMS-S-5000)
- MIL-S-5626 – STEEL, CHROME-MOLYBDENUM (4140) BARS, RODS, AND FORGING STOCK (FOR AIRCRAFT APPLICATION) (S/S BY SAE-AMS6382, AND SAE-AMS6349)
- MIL-S-6049 – STEEL, CHROME-NICKEL-MOLYBDENUM (8740) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) (S/S BY SAE-AMS6322, SAE-AMS6325 AND SAE-AMS6327)
- MIL-S-6050 – Steel, Chrome-Nickel-Molybdenum (8630) Bars and Reforging Stock (Aircraft Quality) (Future acquisitions for this material should refer to SAE-AMS6280)
- MIL-S-6098 – STEEL, CHROME-NICKEL-MOLYBDENUM (8735) BARS AND REFORGING STOCK (AIRCRAFT) (S/S BY SAE-AMS-S-6098)
- MIL-S-62470 – STEEL, CHROME NICKEL MOLYBDENUM, 8620, BARS, FORGING, AND TUBING, BEARING QUALITY, VACUUM DEGASSED (S/S BY SAE-AMS6274 AND SAE-AMS6276)
- MIL-S-62471 – STEEL, STAINLESS, PRECIPITATION HARDENING (AM 355 (UNS S35500)) (NO S/S DOCUMENT)
- MIL-S-6709 – STEEL, CHROME-MOLYBDENUM-ALUMINUM; BARS, RODS, BILLETS AND FORGING STOCK (FOR NITRIDING) (AIRCRAFT QUALITY) (S/S BYSAE-AMS6470 AND SAE-AMS6472)
- MIL-S-6758 – STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) (S/S BY SAE-AMS-S-6758)
- MIL-S-7097 – STEEL, CARBON (1018, 1020, OR 1025) BARS AND FORGING STOCK (S/S BY QQ-S-633)
- MIL-S-7108 – STEEL, ALLOY (MANGANESE-SILICON-NICKEL), BARS AND FORGING STOCK (AIRCRAFT QUALITY) (ASG) (S/S BY SAE-AMS6425)
- MIL-S-7420 – STEEL BARS, ALLOY, CHROMIUM, HIGH CARBON E52100 (AIRCRAFT QUALITY) (S/S BY SAE-AMS6440, SAE-AMS6444 AND SAE-AMS6447)
- MIL-S-7493 – STEEL BARS, ALLOY, CARBURIZING, 4615, 4617, & 4620, AIRCRAFT, QUALITY (S/S BY SAE-AMS6290, SAE-AMS6292 AND SAE-AMS6294)
- MIL-S-7720 – STEEL, CORROSION,RESISTANT (18-8) BARS, WIRE AND FORGING STOCK (AIRCRAFT QUALITY) (S/S BY SAE-AMS-S-7720)