FSC-9150: Oils and Greases: Cutting, Lubricating, and Hydraulic

Documents

• A-A-50433 – Grease, Seawater Wash Resistant
• A-A-50493 – Oil, Penetrating (for Loosening Frozen Metallic Parts)
• A-A-50634 – Lubricating Oil, Ester-Based, for Compressors using HFC-134A Refrigerant (No S/S Document)
• A-A-52039 – Lubricating Oil, Automotive Engine
• A-A-52306 – Lubricating Oil, Heavy-Duty Diesel Engine (S/S by SAE-J2363)
• A-A-59004 – Anti-Galling Compound, Thread Lubricating, Seizing Resistant, and Calcium Hydroxide Containing
• A-A-59113 – Lubricating Oil, Machine Tool Slideways
• A-A-59137 – Lubricating Oil, Breech Block (for Naval Ordnance)
• A-A-59173 – Grease, Silicone
• A-A-59197 – Fatty Oil (for Metal-Working Lubricants)
• A-A-59290 – Hydraulic Fluid, Arresting Gear
• A-A-59354 – Hydraulic Fluids, Petroleum Base, for Machine Tools
• A-A-59685 – Grease, Sealed Ball and Roller Bearing
• API-MPMS-CH-11.1.13 – Chapter 11.1, Volume XIII, January 1982; Reaffirmed August 1987 (ANSI/ASTM-D1250) (IP-200) (API-STD-2540) (No S/S Document)
• API-MPMS-CH-11.1.14 – Chapter 11.1, Volume XIV, January 1982; Reaffirmed August 1987 (ANSI/ASTM-D1250) (IP200) (API-STD2540) (No S/S Document)
• ASTM-D1092 – Greases, Lubricating, Measuring Apparent Viscosity of
• ASTM-D1159 – Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration, Bromine Numbers of
• ASTM-D130 – Copper, Corrosiveness to, from Petroleum Products by Copper Strip Test, Standard Test Method for
• ASTM-D1319 – Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Absorption
• ASTM-D1322 – Smoke Point of Kerosene and Aviation Turbine Fuel
• ASTM-D1401 – Water Separability of Petroleum Oils and Synthetic Fluids
• ASTM-D1403 – Cone Penetration of Lubrication Grease Using One-Quarter and One-Half Scale Cone Equipment
• ASTM-D1740 – Fuels, Aviation Turbine, Luminometer Numbers of (No S/S Document)
• ASTM-D1747 – Materials, Viscous, Refractive Index of, Standard Test Method of
• ASTM-D1831 – Grease, Lubricating, Roll Stability of
• ASTM-D189 – Petroleum Products, Conradson Carbon Residue of
• ASTM-D1947 – LOAD-CARRYING CAPACITY OF PETROLEUM OIL AND SYNTHETIC FLUID GEAR LUBRICANTS (NO S/S DOCUMENT)
• ASTM-D216 – GASOLINE, NATURAL, DISTILLATION OF - 26 AUG 77
• ASTM-D2265 – LUBRICATING GREASE, OVER WIDE TEMPERATURE RANGE, DROPPING POINT OF
• ASTM-D2270 – Viscosity, Calculating, Index from Kinematic Viscosity at 40 and 100 Degrees C
• ASTM-D2272 – Oils, Steam Turbine, by Rotating Pressure Vessel, Oxidation stability of
• ASTM-D2382 – HEAT OF COMBUSTION OF HYDROCARBON FUELS BY BOMB CALORIMETER (HIGH-PRECISION METHOD) (NO S/S DOCUMENT)
• ASTM-D240 – Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
• ASTM-D2550 – WATER SEPARATION CHARACTERISTICS OF AVIATION TURBINE FUELS, STANDARD TEST METHOD FOR (NO S/S DOCUMENT)
• ASTM-D2595 – Greases, Lubricating, Over Wide-Temperature Range, Evaporation Loss of
• ASTM-D2596 – Grease, Lubricating, Measurement of Extreme-Pressure Properties of, (Four-Ball Method)
• ASTM-D2622 – Sulfer in Petroleum Products by Wavelength Dispersive X-Ray Fluorscence Spectrometry
• ASTM-D2625 – Film Lubricants, Solid, (Falex Pin and Vee Method), Endurance (Wear) Life and Load-Carrying Capacity of
• ASTM-D2649 – Lubricants, Solid Film, Corrosion Characteristics of
• ASTM-D2670 – Lubricants, Fluid, (Falex Pin and Vee Block Method), Measuring Wear Properties of
• ASTM-D2835 – Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
• ASTM-D2879 – Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
• ASTM-D2988 – Solvents, Water-Soluble Halide Ion in Halogenated Organic, and their Admixtures, Standard Test Methods for
• ASTM-D3336 – Greases, Lubricating, in Ball Bearings at Elevated Temperatures, Life of
• ASTM-D3337 – Greases, Lubricating, in Small Ball Bearings, Determining Life and Torque of (No S/S Document)
• ASTM-D3374 – Yarns, Glass, Vinyl-Coated
• ASTM-D341 – Liquid Petroleum or Hydrocarbon Products, Viscosity-Temperature Equations and Charts for
• ASTM-D4047 – Oils and Additives, Lubricating, by Quinoline Phosphomolybdate Method, Phosphorus in
• ASTM-D4048 – Copper Corrosion from Lubricating Grease, Detection of
• ASTM-D4057 – Petroleum and Petroleum Products, Manual Sampling of
• ASTM-D4172 – Fluid, Lubricating, Wear Preventive Characteristics of (Four-Ball Method)
• ASTM-D4177 – Petroleum and Petroleum Products, Automatic Sampling of
• ASTM-D4289 – Grease and Fluids, Lubricating, Elastomer Compatibility of
• ASTM-D4624 – Viscosity, Measuring Apparent, by Capillary Viscometer at High Temperature and High-Shear Rates (No S/S Document)
• ASTM-D4628 – Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry, Analysis of
• ASTM-D4683 – Measuring Viscosity of New and used Engine Oils at High Shear Rate and High Temperature by Tapered Berarig Simulator Viscometer at 150 Degrees C
• ASTM-D4684 – Engine Oils at Low Temperature, Determination of Yield Stress and Apparent Viscosity of
• ASTM-D4736 – OILS USED IN OIL COOLED BRONZE FACED FRICTION CLUTCHES, EVALUATING FRICTION RETENTION CHARACTERISTICS OF (NO S/S DOCUMENT)
• ASTM-D4741 – Viscosity, Measuring, at High Temperature and High Shear Rate by Tapered-Plug Viscometer
• ASTM-D4857 – Engines, Gasoline, Other than Outboards, Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle, Determination of the
• ASTM-D4858 – Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines
• ASTM-D4859 – Engines-TC, Gasoline, Two-Stroke-Cycle Spark-Ignition, Lubricants for
• ASTM-D4863 – Engine Lubricants, Gasoline, Lubricity of Two-Stroke-Cycle, Determination of
• ASTM-D4898 – Fluids, Hydraulic, By Gravimetric Analysis, Insoluble Contamination of
• ASTM-D4927 – Lubricant and Additive Components-Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy, Elemental Analysis of
• ASTM-D4951 – Oils, Lubricating by Inductively Coupled Plasma Atomic Emission Spectrometry, Determination of Additive Elements in
• ASTM-D5119 – Engine Oils, Automotive, in the CRC L-38 Spark-Ignition Engine, Evaluation of (No S/S Document)
• ASTM-D5185 – Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
• ASTM-D56 – Tester, Closed Cup, Flash Point by Tag
• ASTM-D566 – Grease, Lubricating, Dropping Point of
• ASTM-D611 – Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
• ASTM-D6184 – Oil Separation from Lubricating Grease (Conical Sieve Method)
• ASTM-D6547 – Corrosiveness of Lubricating Fluid to Bimetallic Couple
• ASTM-D874 – Ash, Sulfated, from Lubricating Oils and Additives
• ASTM-D877 – LIQUIDS, INSULATING, USING DISK ELECTRODES, DIELECTRIC BREAKDOWN VOLTAGE OF
• ASTM-D893 – Oils, Lubricating, Insolubles in Used
• ASTM-D92 – Flash and Fire Points by Cleveland Open Cup
• ASTM-D924 – Liquids, Electrical Insulating, Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of
• ASTM-D93 – Cup Tester, Closed, Flash Point by Pensky-Martens
• ASTM-D937 – Cone Penetration of Petrolatum
• ASTM-D942 – Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method
• ASTM-E203 – Water Using Volumetric Karl Fischer Titration
• ASTM-F313 – HYDRAULIC FLUIDS BY GRAVIMETRIC ANALYSIS, STANDARD TEST METHID FOR ISOLUBLE CONTAMINATION OF (NO S/S DOCUMENT)
• ASTM-STP315 – Multicylinder Test Sequences for Evaluating Automotive Engine Oils (No S/S Document)
• C-C-800 – Cutting Oil, Base, Sulfurized Lard Oil (Use VV-C-850)
• C-O-376 – Oil, Lard
• DOD-G-85733 – Grease, High Temperature, Catapult System
• DOD-L-81846 – Lubricating Oil, Instrument, Ball Bearing, High Flash Point
• DOD-L-85645 – Lubricant, Dry Film, Molecular Bonded (S/S by SAE-AMS 2530)
• DOD-PRF-85734 – Lubricating Oil, Helicopter Transmission System, Synthetic Base
• FED-STD-103 – CONSERVATION OF AUTOMOTIVE ENEINE OILS
• JAN-F-461 – FLUID, SHOCK-ABSORBER, HEAVY (USE MIL-S-46013)
• JAN-O-1153 – OIL, CUTTING, MINERAL-LARD, SULFUR-TREATED
• JJJ-C-86 – CASTOR OIL, TECHNICAL (S/S BY ASTM-D960)
• JJJ-O-318 – OIL, CASTOR, TECHNICAL-GRADE (S/S BY JJJ-C-86)
• JJJ-W-00145 – WAX, LAUNDRY (S/S BY O-W-001359)
• MIL-C-1423 – Container, Tin with Graphite Grease, for Range, Field, M-1937
• MIL-C-15920 – Coolants, Cutting (Use MIL-C-22572)
• MIL-C-18510 – Cutting Compound, Soluble (Paste) (Use VV-C-846)
• MIL-C-22572 – Cutting Fluids, Emulsifiable Oils (S/S by VV-C-846)