FSC-5999: Miscellaneous Electrical and Electronic Components

Documents

• MIL-M-38527/2 – Mounting Pads, Electrical-Electronic Component, .200 or .230 Diameter Pin Center (S/S by A-A-55485/2)
• MIL-M-38527/3 – Mounting Pads, Electrical-Electronic Component, Lead Conversion, .100 Diameter Pin Center to a Larger Diameter (S/S by A-A-55485/3)
• MIL-M-38527/4 – Mounting Pads, Electrical-Electronic Component, Lead Conversion, .200 or .230 Diameter Pin Center to a Larger Diameter (S/S by A-A-554854)
• MIL-M-38527/5 – MOUNTING PADS, ELECTRICAL-ELECTRONIC COMPONENT, LEAD CONVERSION, .200 OR .230 DIAMETER PIN CENTER TO A GRID PATTERN (S/S BY A-A-55485/5)
• MIL-M-38527/6 – Mounting Pad, Electrical-Electronic Component, Relay and Discrete Component (S/S by A-A-55485/6)
• MIL-M-38527/7 – Mounting Pads, Electrical-Electronic Component, Multiple Applications (S/S by A-A-55485/7)
• MIL-M-38527/8 – Mounting Pads, Electrical-Electronic Component, .002, .005, and .010 Inch Thick (S/S by MIL-I-49466/1 and MIL-I-49466/2)
• MIL-M-38527/9 – Mounting Pads, Electrical-Electronic Component, Hardware for Mounting (S/S by MIL-I-49466/1 and MIL-I-49466/2)
• MIL-M-55183 – MICROMODULES, DESIGN, CONSTRUCTION, AND APPLICATION OF (FOR ARMY ELECTRONIC EQUIPMENT)
• MIL-M-83436 – Multiwire Interconnections Boards (Plated-through Holes) (See Notice 1 for Replacement Information)
• MIL-P-13949/1 – Plastic Sheet, Laminated, Metal-Clad (for Printed Wiring Boards), Base Material PX, Paper Base, Epoxy Resin, Flame Resistant, Copper-Clad (S/S by MIL-S-13949/4)
• MIL-P-13949/14 – PLASTIC SHEET, LAMINATED, METAL-CLAD (FOR PRINTED WIRING BOARDS), BASE MATERIAL GY, GLASS BASE WOVEN, POLYTETRAFLUOROETHYLENE RESIN, FLAME RESISTANT, FOR MICROWAVE APPLICATION, COPPER-CLAD (NO S/S DOCUMENT)
• MIL-P-13949/3 – Plastic, Sheet, Laminated, Metal-Clad (for Printed Wiring Boards), Base Material GE, Glass Base, Woven, Majority Difunctional Epoxy Resin, General Purpose, Copper-Clad (S/S by MIL-P-13949/4)
• MIL-P-13949/6 – PLASTIC SHEET, LAMINATED, METAL-CLAD (FOR PRINTED WIRING BOARDS), BASE MATERIAL GP, GLASS BASE, NON WOVEN, POLYTETRAFLUOROETHYLENE RESIN, FLAME RESISTANT, COPPER-CLAD (NO S/S DOCUMENT)
• MIL-P-13949/7 – PLASTIC SHEET, LAMINATED, METAL-CLAD (FOR PRINTED WIRING BOARDS), BASE MATERIAL GF, GLASS BASE, NONWOVEN, POLYTETRAFLUOROETHYLENE RESIN, FLAME RESISTANT, FOR MICROWAVE APPLICATION, COPPER-CLAD (NO S/S DOCUMENT)
• MIL-P-13949/8 – PLASTIC SHEET, LAMINATED, METAL-CLAD (FOR PRINTED WIRING BOARDS), BASE MATERIAL GT, GLASS BASE, WOVEN, POLYTETRAFLUOROETHYLENE RESIN, FLAME RESISTANT, COPPER-CLAD (NO S/S DOCUMENT)
• MIL-P-13949/9 – PLASTIC SHEET, LAMINATED, METAL-CLAD (FOR PRINTED WIRING BOARDS), BASE MATERIAL GX, GLASS BASE, WOVEN, POLYTETRAFLUOROETHYLENE RESIN, FLAME RESISTANT, FOR MICROWAVE APPLICATION, COPPER-CLAD (NO S/S DOCUMENT)
• MIL-P-21193 – PRINTED WIRING, GENERAL SPECIFICATION (USE MIL-P-55110)
• MIL-P-27538 – PLASTIC SHEET, FEP&FLUOROCARBON (UNFILLED) COPPER CLAD (FOR PRINTED WIRING) (NO S/S DOCUMENT)
• MIL-P-55424 – PRINTED WIRING BOARDS, MULTILAYERED (S/S BY MIL-P-55110 NOW MIL-PRF-55110)
• MIL-P-55617 – PLASTIC SHEET, THIN LAMINATE, METAL CLAD (FOR PRINTED WIRING, PRIMARILY FOR MULTILAYER (S/S BY MIL-P-13949)
• MIL-P-55640 – PRINTED WIRING BOARDS MULTILAYER (PLATED THROUGH HOLE) (USE MIL-P-55110)
• MIL-P-82585 – PRINTED WIRING BOARD (S/S BY MIL-P-55110 NOW MIL-PRF-55110)
• MIL-PRF-83531/4 – Delay Lines, 10-Tap, Dual-In-Line, 14-Pin, Surface Mount Device (No S/S Document)
• MIL-PRF-83532 – Delay Lines, Active, General Specification for
• MIL-PRF-83532/1 – Delay Lines, 14-Pin Dip Compatible, 5 Tap
• MIL-PRF-83532/2 – Delay Lines, 14-Pin Dip Compatible, 5 Tap
• MIL-PRF-83532/3 – Delay Lines, 14-Pin Dip Compatible, 10 Tap
• MIL-PRF-83532/4 – Delay Lines, 14-Pin Dip Compatible, 3 Delay Circuits Per Package
• MIL-PRF-83532/5 – DELAY LINES, ACTIVE, 16-PIN DIP COMPATIBLE, PROGRAMMABLE 3-BIT, TTL COMPATIBLE (NO S/S DOCUMENT)
• MIL-PRF-83532/6 – DELAY LINES, ACTIVE, 16-PIN DIP COMPATIBLE, PROGRAMMABLE 3-BIT, EMITTER-COUPLED LOGIC (NO S/S DOCUMENT)
• MIL-PRF-83532/7 – Delay Lines, Active, 16-Pin Dip Compatible, Programmable 3-Bit, TTL Compatible, with Input Buffer (No S/S Document)
• MIL-PRF-83532/8 – DELAY LINES, ACTIVE, 14-PIN SURFACE MOUNT, 5 TAP (NO S/S DOCUMENT)
• MIL-R-39027/2 – READOUT, STYLE RB01
• MIL-S-47235 – SHIELDING, MAGNETIC, FOIL, SHEET (NO S/S DOCUMENT)
• MIL-S-49433 – SURFACE ACOUSTIC WAVE DEVICES, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
• MIL-S-55620 – SUBSTRATES, CERAMIC, FOR DEPOSITION OF THIN FILM MICROCIRUIT (REFER TO MIL-STD-883)
• MIL-STD-1276 – Leads for Electronic Component Parts
• MIL-STD-1495 – MULTILAYER PRINTED WIRING BOARDS FOR ELECTRONIC EQUIPMENT (S/S BY MIL-STD-275)
• MIL-STD-1569 – REQUIREMENTS FOR THE REPAIR & MODIFICATION OF PRINTED WIRING ASSEMBLIES (S/S BY MIL-P-28809)
• MIL-STD-1837 – Miscellaneous Electrical and Electronic Components, Selection Guide (No S/S Document)
• MIL-STD-429 – Printed Wiring and Printed Circuit Terms and Definitions (See ANSI/IPC-T-50)
• MIL-T-47326 – Tape, Pressure-Sensitive Adhesive, Aluminum-Backed, Electrically Conductive
• MIL-W-47056 – WIRE, MESH, KNITTED, STEEL, COPPER-CLAD, TIN COATED (NO S/S DOCUMENT)
• MMPA0100 – Permanent Magnet Materials
• MS16122 – CHOKE, RADIO FREQUENCY MOLDED (LT5K101 TO LT5K114, INCL.)
• MS16221 – CHOKE, RADIO FREQUENCY, MOLDED (USE MS-91189)
• MS16222 – CHOKE, RADIO FREQUENCY, LT7K233 TO LTK252, INCLUSIVE (S/S BY MS 90542)
• MS16223 – CHOKES, RADIO FREQUENCY, MOLDED, LT7K211 TO LT7K232, INCLUSIVE
• MS16224 – CHOKES, RADIO FREQUENCY, MOLDED, LT7K125 TO LT7K144, INCLUSIVE (USE MS 75008)
• MS16225 – CHOKES, RADIO FREQUENCY, MOLDED, LT7K102 TO LT7K124, INCLUSIVE (USE MS18130)
• MS16226 – CHOKES, RADIO FREQUENCY, MOLDED, LT7K145 TO LT7K187, INCLUSIVE
• MS16441 – CHOKES, RADIO FREQUENCY, HERMETICALLY SEALED IN METALLIC CASES (LT7K042 THRU LT7K047) (USE MS18132)
• MS16444 – CHOKES, RADIO FREQUENCY, PLASTIC ENCASED (LT8K067 THRU LT8K072)
• MS16445 – CHOKES, RADIO FREQUENCY, PLASTIC ENCASED (LT8K073 THRU LT8K087)
• MS16447 – CHOKE, RADIO FREQUENCY, PLASTIC ENCASED (LT8K099 THRU LT8K101)
• MS16454 – CHOKE, RADIO FREQUENCY (LT4K001)
• MS17177 – CONNECTOR, RECEPTACLE (GROUNDED) WITH SWITCH DPST, 125 VOLT, 3 AMPS (S/S BY MIL-R-2726/43)
• MS27148 – CONTACT, ELECTRICAL NO. 12, 14, AND 16 A.W.G. (S/S BY A-A-52536)
• MS27574 – CABLE, AIRCRAFT AND AGE GROUNDING (S/S BY MIL-DTL-83413/1 AND MIL-C-83413/3)
• NAS4117 – Heat Sink-Insulator, Wafer Type
• NAS4118 – Heat Sink, Electrical-Electronic Component, Semiconductor Devices, Retainer Clip Type
• NAS4119 – Heat Sink, Electrical-Electronic Component, Semiconductor Devices, Press-on Type
• NAS4120 – Heat Sink, Electrical-Electronic Component, Semiconductor Devices, Encapsulating Type, TO-5
• NAS4121 – Heat Sink, Electrical-Electronic Component, Semiconductor Devices, Formed
• NAS4122 – Heat Sink, Electrical-Electronic Component, Semiconductor Devices, Extruded
• NAS4123 – New: Heat Sink, Electrical-Electronic Component, Semiconductor Devices, for Dual Inline Packages (DIP)
• NAS4124 – New: Heat Sink, Electrical-Electronic Component, Semiconductor Devices, Dual Link
• QPL-28859 – Connector Component Parts, Electrical Backplane, Printed Wiring, General Specification for (Replaced by the Qualified Products Database (QPD) See Notice 1 for Additional Information)
• QPL-39027 – READOUTS, INCANDESCENT TYPE, GENERAL SPECIFICATION FOR
• QPL-55617 – PLASTIC SHEET, THIN LAMINATE, METAL CLAD (FOR PRINTED WIRING, PRIMARILY FOR MULTILAYER) (SEE MIL-P-13949 AND QPL-13949)
• QPL-55636 – GLASS CLOTH, RESIN PREIMPREGNATED (B STAGE) (FOR MULTILAYER PRINTED WIRING BOARDS) (SEE MIL-P-13949 AND QPL-13949)
• QPL-83416 – HEATER, ELECTRICAL (FOR HEATING ELECTRICAL AND ELECTRONIC EQUIPMENT) (NO S/S DOCUMENT)
• QPL-83528 – Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, General Specification for (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-83531 – Delay Lines, Passive, General Specification for (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-83532 – Delay Lines, Active, General Specification for (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QQ-M-60 – Magnet Materials, Permanent
• SAE-AMS7510 – MAGNETS, RARE-EARTH/COBALT, PERMANENT POWDER-METALLURGY PRODUCT (NO S/S DOCUMENT)
• SAE-AMS7510/1 – MAGNETS, RARE-EARTH/COBALT, PERMANENT SAMARIUM-COBALT, 33/67 - 15 (119) 250 (NO S/S DOCUMENT)
• SAE-AMS7510/2 – MAGNETS, RARE-EARTH/COBALT, PERMANENT SAMARIUM-COBALT, 33/67 - 18 (143) 250 (NO S/S DOCUMENT)
• W-C-440 – CLIP, ELECTRICAL, GENERAL SPECIFICATION FOR (S/S BY A-A-59466)