FSC-5970: Electrical Insulators and Insulating Materials

Documents

• A-A-2094 – Tape, Insulation, Electrical (Friction) (See Notice 1 of Cancellation for Replacement Information)
• A-A-55128 – Insulator, Spreader (No S/S Document)
• A-A-55809 – Insulation Tape, Electrical, 600V, Polyvinyl Chloride, Pressure-Sensitive Adhesive
• A-A-56019 – Tape, Pressure-Sensitive, Fluorinated Ethylene-Propylene (No S/S Document)
• A-A-56023 – Insulating Compound, Electrical, Silicone Rubber, Room Temperature Vulcanizing
• A-A-59134 – Insulating Compound, Electrical, Epoxy, Colloidal Silica Filled for Potting and Encapsulation
• A-A-59163 – Insulation Tape, Electrical, Self-Adhering Unsupported Silicone Rubber
• A-A-59296 – Insulating Compound, Electrical (for Field Splicing Applications)
• A-A-59300 – Insulation Tape, Nonadhering, Glass Fabric,Polytetrafluoroethylene Coated
• A-A-59301 – Sleeving, Textile, Braided, Synthetic Polymer, -67 Degree F (-55 Degree C) to +221 Degree F (+105 Degree C)
• A-A-59382 – Reusable Environmental Protection Sleeves
• A-A-59474 – Insulation Tape, Electrical; High Temperature, Polytetrafluoroethylene, Pressure-Sensitive
• A-A-59770 – Insulation Tape, Electrical, Pressure Sensitive Adhesive and Pressure Sensitive Thermosetting Adhesive
• A-A-59877 – Insulating Compound, Electrical, Embedding
• ANSI-C135.7 – Zinc-Coated Spool Type Secondary Racks, American National Standard for (No S/S Document)
• ANSI-C29.1 – Test Methods for Electrical Power Insulators
• ANSI-C29.2 – Insulators-Wet-Process Porcelain and Toughened Glass-Suspension Type ( S/S by ANSI/NEMA C29.2A and ANSI/NEMA C29.2B)
• ANSI-C29.3 – Insulators-Wet-Process Porcelain (Spool Type)
• ANSI-C29.8 – Wet-Process Porcelain Insulators - Apparatus, Cap and Pin Type
• ANSI-NEMA-C29.4 – Wet Process Porcelain Insulators – Strain Type
• ANSI-NEMA-C29.5 – Wet-Process Porcelain Insulators – Low and Medium Voltage Types
• ANSI-NEMA-C29.6 – Wet Process Porcelain Insulators – High-Voltage Pin Type
• ASTM-C408 – Ceramics, Thermal Conductivity of Whiteware
• ASTM-D1000 – Tapes, Pressure-Sensitive Adhesive-Coated, Used for Electrical and Electronic Applications
• ASTM-D1048 – Rubber Insulation Blankets
• ASTM-D1049 – Rubber Insulating Covers
• ASTM-D1050 – Rubber Insulating Line Hose
• ASTM-D116 – Ceramic Materials Vitrified for Electrical Applications
• ASTM-D1169 – Liquids, Electrical Insulating, Specific Resistance (Resistivity) of
• ASTM-D1458 – Glass Fabric And Tapes For Electrical Insulation, Fully Cured Silicone Rubber-coated
• ASTM-D149 – Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulation Materials at Commercial Power Frequencies
• ASTM-D178 – Rubber Insulating Matting
• ASTM-D1830 – Flexible Sheet Materials used for Electrical Insulation by the Curved Electrode Method, Thermal Endurance of
• ASTM-D1868 – Detection And Measurement Of Partial Discharge (Corona) Pulses In Evaluation Of Insulation Systems
• ASTM-D1932 – Thermal Endurance of Flexible Electrical Insulating Varnishes
• ASTM-D202 – Insulation, Electrical, Sampling and Testing Untreated Paper Used for
• ASTM-D2029 – Water Vapor Content of Electrical Insulating Gases by Measurement of Dew Point
• ASTM-D2436 – Laboratory Ovens for Electrical Insulation, Forced-Convection (No S/S Document)
• ASTM-D2519 – Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
• ASTM-D2520 – Materials at Microwave Frequencies and Temperatures to 1650 Degrees C, Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating (No S/S Document)
• ASTM-D2671 – Tubing, Heat-Shrinkable, for Electrical Use
• ASTM-D2686 – Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape (Future Acquisition should refer to A-A-59474)
• ASTM-D3145 – Varnishes by the Helical Coil Method, Electrical Insulating, Thermal Endurance of
• ASTM-D3391 – TAPE, RUBBER INSULATING, FOR HIGH VOLTAGE APPLICATIONS (NO S/S DOCUMENT)
• ASTM-D348 – Tubes, Rigid Used for Electrical Insulation
• ASTM-D350 – Sleeving used for Electrical Insulation, Flexible Treated
• ASTM-D351 – Muscovite Block, Natural Mica and Thins Based on Visual Quality
• ASTM-D374 – Insulation, Solid Electrical, Thickness of (No S/S Document)
• ASTM-D3850 – Materials by Thermogravimetric Method (TGA), Solid Electrical Insulating, Rapid Thermal Degradation of
• ASTM-D3916 – Rod, Plastic, Pultruded Glass-Fiber-Reinforced, Tensile Properties Of
• ASTM-D4325 – Rubber Tapes, Nonmetallic Semi-Conducting and Electrically Insulating
• ASTM-D4388 – Rubber Tapes, Nonmetallic Semi-Conducting and Electrically Insulating
• ASTM-D518 – Rubber Deterioration - Surface Cracking (S/S by ASTM-D1149)
• ASTM-D5470 – Properties, Thermal Transmission, of Thermally Conductive Electrical Insulation Materials
• ASTM-D69 – Friction Tapes
• ASTM-D710 – Sheets, Rods, and Tubes, Vulcanized Fibre, Used for Electrical Insulation
• ASTM-D876 – Tubing, Nonrigid vinyl Chloride Polymer, Used for Electrical Insulation
• ASTM-D902 – Glass Fabrics and Glass Fabric Tapes, Flexible Resin-Coated, used for Electrical Insulation
• ASTM-D922 – Vinyl Chloride, Nonrigid, Polymer Tubing
• HH-C-471 – Cloth and Tape; Cotton, Varnished (for Electrical Insulation)
• HH-I-00536/(the base document for this interim revision is HH-I-536 NOT 3) – Insulation, Electrical, MICA, Natural Muscovite (No S/S Document)
• HH-I-435 – INSULATOR, ELECTRIC, PORCELAIN AND GLASS (S/S BY ANSI-C29.1-C29.6)
• HH-I-510 – Insulation Tape, Electrical, Friction (S/S by A-A-2094)
• HH-I-536/(an interim revision also exists for this document number as HH-I-00536A NOT 1) – Insulation Sheet, Electrical, Natural Muscovite Mica (S/S by ASTM-D351)
• HH-I-553 – Insulation Tape, Electrical, (Rubber, Natural and Synthetic) (S/S by ASTM D4388)
• HH-I-595 – INSULATION TAPE, ELECTRICAL, PRESSURE SENSITIVE ADHESIVE, PLASTIC (S/S BY A-A-55809)
• HH-T-101 – Tape, Friction (S/S by HH-I-510)
• HH-T-111 – Tape, Rubber (Natural and Synthetic), Insulating (Use HH-I-553)
• IEEE43 – Insulation Resistance of Testing Rotating Machinery
• JAN-I-12 – INSULATING MATERIALS, CERAMIC RADIO DIELECTRIC, CLASS H (NO S/S DOCUMENT)
• JAN-I-21 – INSULATORS, PORCELAIN, RADIO (S/S BY MIL-I-23264)
• JAN-I-7 – Insulators, Glass-Bonded-Mica, Radio
• JAN-I-8 – Insulators, Steatite, Radio
• JAN-I-9 – Insulators, Glass, Radio
• MIL-C-12557 – Compound, Potting (Chatterton Compound)
• MIL-C-12762 – Compound, Potting (Bituminous Plastic)
• MIL-C-46878 – Coloring Compound, Carbon Black (No S/S Document)
• MIL-C-46880 – Coating Compound, Synthetic Resin (No S/S Document)
• MIL-C-46881 – Coating, Transparent, Epoxy Resin (No S/S Document)
• MIL-C-47002 – Coating, Polyurethane, Single Component System (No S/S Document)
• MIL-C-47003 – Curing Agent, Silicone Rubber (No S/S Document)
• MIL-C-47054 – Compound, Potting, Unfilled, Flexible, Solid Polyurethane (Use MIL-P-47298)
• MIL-C-47097 – Coating, Two Part, Epoxy Resin Base, Clear (No S/S Document)
• MIL-C-47102 – Coating, Polyurethane, for Electronic Components, Metals, and Plastics (S/S by MIL-I-46058)
• MIL-C-47150 – Compound, Coating, Porcelain for Potting Electronic Components (No S/S Document)
• MIL-C-47153 – Compound, Insulating, Potting and Encapsulating, Epoxy Resin (No S/S Document)
• MIL-C-47200 – Compound, Coating, Polyurethane, Electrical Insulating, Room Temperature Cure (S/S by MIL-I-46058)
• MIL-C-47233 – Compound, Insulating, Electrical, Embedding, Material and Procedure for (No S/S Document)
• MIL-C-47272 – Compound, Epoxy, Electrical Insulating (No S/S Document)
• MIL-DTL-23053 – Insulation Sleeving, Electrical, Heat Shrinkable, General Specification for (S/S by SAE-AMS-DTL-23053)
• MIL-DTL-23053/1 – Insulation Sleeving, Electrical, Heat Shrinkable, Crosslinked Chlorinated Polyolefin, Flexible (S/S by SAE-AMS-DTL-23053/1)
• MIL-DTL-23053/10 – Insulation Sleeving, Electrical, Heat Shrinkable, Silicone Rubber, Flexible (S/S by SAE-AMS-DTL-23053/10)
• MIL-DTL-23053/11 – Insulation Sleeving, Electrical, Heat Shrinkable, Fluorinated Ethylene Propylene, Non-Crosslinked (S/S by SAE-AMS-DTL-23053/11)
• MIL-DTL-23053/12 – Insulation Sleeving, Electrical, Heat Shrinkable, Polytetrafluoroethylene (S/S by SAE-AMS-DTL-23053/12)
• MIL-DTL-23053/13 – Insulation Sleeving, Electrical, Heat Shrinkable, Fluoroelastomer, Flexible (S/S by SAE-AMS-DTL-23053/13)
• MIL-DTL-23053/14 – Insulation Sleeving, Electrical, Heat Shrinkable, Ethylene-Tetrafluoroethylene Fluoropolymer, Semi-Rigid (S/S by SAE-AMS-DTL-23053/14)
• MIL-DTL-23053/15 – Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Heavy-Wall, Coated, Flexible, Outer Wall Crosslinked (S/S by SAE-AMS-DTL-23053/15)
• MIL-DTL-23053/16 – Insulation Sleeving, Electrical, Heat Shrinkable, Crosslinked, Elastomeric Polyolefin, Flexible (S/S by SAE-AMS-DTL-23053/16)
• MIL-DTL-23053/17 – Insulation Sleeving, Electrical, Heat Shrinkable, Flame Retarded, Modified Polyolefin, Flexible, Crosslinked (S/S by SAE-AMS-DTL-25053/17)
• MIL-DTL-23053/18 – Insulation Sleeving, Electrical, Heat Shrinkable, Modified Fluoropolymer, Crosslinked (S/S by SAE-AMS-DTL-23053/18)