FSC-5640: Wallboard, Building Paper, and Thermal Insulation Materials

Documents

• A-A-2231 – TAPE, PRESSURE SENSITIVE ADHESIVE (DUCT) (NO S/S DOCUMENT)
• A-A-2232 – TAPE, PRESSURE SENSITIVE ADHESIVE (DUCT) (NO S/S DOCUMENT)
• A-A-2243 – Building Board, Hard Pressed Vegetable Fiber (Hardboard) (S/S by ANSI-A135.4)
• A-A-2274 – WALL COVERING, ACOUSTICAL (NRC/80) (NO S/S DOCUMENT)
• A-A-2300 – WALL COVERING, ACOUSTICAL (NRC/60) (NO S/S DOCUMENT)
• A-A-2304 – WALLBOARD, GYPSUM (REFER TO ASTM-C36)
• A-A-52152 – Insulation Sleeving, Thermal, Tubular (Metric)  (No S/S Document)
• A-A-52404 – Insulation Sheet, Cellular, Plastic: Thermal (Metric)
• A-A-52411 – Insulation, Molded, Noise Barrier
• A-A-52449 – Insulation, Panel, Vibration-Dampening and Thermal-Barrier
• A-A-52473 – Insulation, Floor-Mat, Thermal-Barrier
• A-A-52487 – Insulation, Panel Noise-and Thermal-Barrier (MIL-PRF-32161, may be used for future procurements of this commodity)
• A-A-902 – INSULATION, THERMAL (VERMICULITE) (S/S BY ASTM-C516)
• A-A-903 – INSULATION, THERMAL (EXPANDED PERLITE) (S/S BY ASTM-D3018)
• ACI503.1 – EPOSY RESIN STANDARDS (NO S/S DOCUMENT)
• AHA-A135.4 – Standard for Basic Hardboard (No S/S Document)
• ANSI-A135.4 – Hardboard Basic
• ASTM-C1015 – Insulation, Thermal, Cellulosic and Mineral Fiber Loose-Fill, Installation of
• ASTM-C1029 – Insulation, Spray-Applied Rigid Cellular Polyurethane Thermal
• ASTM-C1047 – Accessories for Gypsum Wallboard and Gypsum Veneer Base
• ASTM-C1071 – Insulation, Fibrous Glass Duct Lining (Thermal and Sound Absorbing Material)
• ASTM-C1136 – Insulation, Thermal, Flexible, Low Permeance Vapor Retarders
• ASTM-C1289 – Board, Faced Rigid Cellular Polyisocyanurate Thermal Insulation
• ASTM-C165 – Insulations, Thermal, Measuring Compressive Properties of
• ASTM-C167 – Blanket or Batt Thermal Insulations, Thickness and Density of
• ASTM-C177 – Heat Flux Measurements and Thermal Transmission Properties by means of the Guarded-Hot-Plate Apparatus, Steady-State
• ASTM-C195 – Cement, Thermal Insulating, Mineral Fiber
• ASTM-C196 – Cement, Thermal Insulating, Expanded or Exfoliated Vermiculite
• ASTM-C203 – Insulation, Thermal Block-Type, Breaking Load and Flexural Properties of
• ASTM-C208 – Board, Insulating Cellulosic Fiber
• ASTM-C209 – Fiber Insulating Board, Cellulosic
• ASTM-C220 – Sheets, Flat Asbestos-Cement, Standard Specification for (No S/S Document)
• ASTM-C221 – SHEETS, CORRUGATED ASBESTOS-CEMENT, STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)
• ASTM-C222 – SHINGLES, ROOFING, ASBESTOS-CEMENT
• ASTM-C223 – SIDING, ASBESTOS-CEMENT
• ASTM-C236 – BUILDING ASSEMBLIES BY MEANS OF A GUARDED HOT BOX, STEADY-STATE THERMAL PERFORMANCE OF (NO S/S DOCUMENT)
• ASTM-C302 – Insulation, Thermal, Preformed Pipe - Covering - Type, Density and Dimensions of NSULATION, THERMAL, PREFORMED PIPE-COVERING-TYPE, DENSITY AND DIMENSIONS OF
• ASTM-C303 – Insulation, Thermal, Density of Preformed Block and Board Type, Dimensions
• ASTM-C335 – Insulation, Pipe, Steady-State Heat Transfer Properties of (S/S by ASTM-C335/C335M)
• ASTM-C335-C335M – Insulation, Pipe, Steady-State Heat Transfer Properties of
• ASTM-C356 – Insulation, Thermal, Linear Shrinkage of Preformed High-Temperature Subjected to Soaking Heat
• ASTM-C36-C36M – WALLBOARD, GYPSUM (NO S/S DOCUMENT)
• ASTM-C390 – Thermal Insulation Lots, Sampling and Acceptance of
• ASTM-C411 – Insulation, Thermal, Hot-Surface Performance of High-Temperature
• ASTM-C421 – Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation
• ASTM-C423 – Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
• ASTM-C442-C442M – GYPSUM BACKING BOARD, GYPSUM COREBOARD, AND GYPSUM SHAFTLINER BOARD (NO S/S DOCUMENT)
• ASTM-C459 – STANDARD TEST METHODS FOR ASBESTOS-CEMENT FLAT PRODUCTS
• ASTM-C516 – Insulation, Thermal, Loose Fill, Vermiculite, Standard Specification for
• ASTM-C518 – Heat Flow Meter Apparatus, Steady-State Thermal Transmission Properties by Means of the
• ASTM-C520 – Insulations, Granular Loose Fill, Density of
• ASTM-C532 – FORMBOARD, STRUCTURAL INSULATING, (CELLULOSIC FIBER), STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)
• ASTM-C533 – Calcium Silicate Block and Pipe Thermal Insulation
• ASTM-C534 – Insulation, Thermal, in Sheet and Tubular Form, Preformed Flexible Elastomeric Cellular (No S/S Document)
• ASTM-C547 – Fiber, Mineral, Pipe Insulation
• ASTM-C549 – Insulation, Perlite Loose Fill
• ASTM-C550 – Block, Rigid and Board Thermal Insulation, Measuring Trueness and Squareness of,
• ASTM-C552 – Glass, Cellular, Thermal Insulation
• ASTM-C553 – Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
• ASTM-C578 – Insulation, Thermal, Rigid, Cellular Polystyrene
• ASTM-C591 – Insulation, Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal
• ASTM-C592 – Mineral Fiber Blanket Insulation and Blanket Type Pipe Insulation (Metal Mesh Covered) (Industrial Type)
• ASTM-C610 – Insulation, Expanded Perlite Block and Pipe Thermal
• ASTM-C612 – Mineral Fiber Block and Board Thermal Insulation
• ASTM-C630-C630M – WATER-RESISTANT GYPSUM BACKING BOARD (NO S/S DOCUMENT)
• ASTM-C635 – Ceilings, Acoustical Tile and Lay-in Panel, Metal Suspension Systems for, Standard Specification for the Manufacture, Performance, and Testing of (No S/S Document)
• ASTM-C636 – Tile and Lay-In Panels, Acoustical, Installation of Metal Ceiling Suspension Systems for (No S/S Document)
• ASTM-C640 – CORK BOARD AND CORK TYPE THERMAL INSULATION (NO S/S DOCUMENT)
• ASTM-C645 – Steel Framing Members, Nonstructural
• ASTM-C659 – PANELS, INSULATING, ASBESTOS CEMENT PLASTIC FOAM CORE
• ASTM-C665 – Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
• ASTM-C725 – Siding, Fiber, Semidense Mineral
• ASTM-C726 – Mineral Wool Roof Insulation Board
• ASTM-C728 – Board, Thermal Insulation, Perlite
• ASTM-C739 – Fiber, Cellulosic Loose-Fill Thermal Insulation
• ASTM-C746 – ASBESTOS CEMENT SHEETSFOR BULKHEADING (NO S/S DOCUMENT)
• ASTM-C754 – Steel Framing Members to Receive Screw-Attached Gypsum Panel Products, Installation of
• ASTM-C764 – Mineral Fiber Loose-Fill Thermal Insulation
• ASTM-C795 – Insulation, Thermal, for use in Contact with Austenitic Stainless Steel
• ASTM-C79-C79M – BOARD, GYPSUM SHEATHING BOARD (NO S/S DOCUMENT)
• ASTM-C840 – Board, Gypsum, Application and Finishing of
• ASTM-C841 – Installation of Interior Lathing and Furring
• ASTM-C843 – Application of Gypsum Veneer Plaster
• ASTM-C844 – Application of Gypsum Base to Receive Gypsum Veneer Plaster
• ASTM-C916 – Insulation, Thermal, Duct, Adhesives for
• ASTM-C921 – Insulation, Thermal, Jacketing Materials for, Determining the Properties of
• ASTM-C930 – Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories
• ASTM-C931-C931M – GYPSUM SOFFIT BOARD, EXTERIOR (NO S/S DOCUMENT)
• ASTM-C960-C960M – GYPSUM BOARD, PREDECORATED (NO S/S DOCUMENT)
• ASTM-C984 – ROOF INSULATION, PERLITE BOARD AND RIGID CELLULAR POLYISOCYANURATE COMPOSITE (NO S/S DOCUMENT)
• ASTM-D2277 – SHEATHING, FIBERBOARD NAIL-BASE, STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)
• ASTM-D2341 – FOAM, URETHANE, RIGID (NO S/S DOCUMENT)
• ASTM-D828 – Paper and Paperboard using Constant-Rate-of-Elongation Apparatus, Tensile Properties of (No S/S Document)
• ASTM-E1264 – Ceiling Products, Acoustical
• ASTM-E336 – Measurement of Airborne Sound Attenuation between Rooms in Buildings
• ASTM-E557 – Partitions, Operable, the Installation of
• ASTM-E580 – Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels in Areas Requiring Seismic Restraint, Application of (No S/S Document)
• ASTM-E596 – Laboratory Measurement of the Noise Reduction of Sound-Isolating Enclosures
• ASTM-E605 – Material, Thickness and Density of Sprayed Fire-Resistive, (SFRM) Applied to Structural Members
• ASTM-E736 – Materials Applied to Structural Members, Sprayed Fire-Resistive, Cohesion/Adhesion of