FSC-5365: Bushings, Rings, Shims, and Spacers

Documents

• A-A-52153 – Plug, Machine Thread, Magnetic: Drain (No S/S Document)
• A-A-59557 – Ring, Dee - Medium (S/S by MIL-DTL-3390)
• A-A-59558 – Ring, Lock, Serrated (See Notice 1 for Replacement Information)
• A-A-59561 – Shim, Solid, Round
• A-A-60032 – Spacers, Cadmium and Hexavalent-Chromium Free
• ASME-B27.6 – Rings, Spiral Retaining, Uniform Cross Section, General Purpose
• ASME-B27.7 – Rings, Cross Section Retaining, Tapered and Reduced, General Purpose
• ASME-B27.8M – Rings, Cross Section Retaining, Tapered and Reduced, General Purpose Metric (No S/S Document)
• DOD-S-63544 – SHIM, METRIC, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
• DOD-S-63544/1 – SHIM, CRES, METRIC (NO S/S DOCUMENT)
• DOD-S-70328 – SPACER, RING, METRIC, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
• DOD-S-70328/1 – SPACER, RING, METRIC (NO S/S DOCUMENT)
• MIL-DTL-32373 – Plug, Machine Thread, Magnetic: Drain
• MIL-DTL-3390 – Rings, Dee
• MIL-DTL-85069 – Sleeves and Grommets, Fastener,
• MIL-DTL-85069/10 – Sleeve (Grommet), Hard Seat, Reduced Head, Swaged, Countersunk, Panel Fastener (S/S by MIL-DTL-85069)
• MIL-DTL-85069/11 – Sleeve (Grommet), Hard Seat, Tension Head, Swaged, Countersunk, Panel Fastener (S/S by MIL-DTL-85069)
• MIL-DTL-85069/2 – Sleeves, Fastener, Grooved, Protruding Head, Shear and Tension, 1/64 Oversize (S/S by MIL-DTL-85069)
• MIL-DTL-85069/3 – Sleeves, Fastener, Grooved, 100 Degrees Flush Reduced Head, Shear, 1/64 Oversize (S/S by MIL-DTL-85069)
• MIL-DTL-85069/4 – Sleeves, Fastener, Grooved, 100 Degrees Flush Head, 1/64 Oversize (S/S by MIL-DTL-85069)
• MIL-DTL-85069/5 – Sleeves, Fastener, Grooved, 100 Degrees Flush Full Head, Tension, 1/64 Oversize (S/S by MIL-DTL-85069)
• MIL-DTL-85069/6 – Sleeves, Fastener, Grooved, Protruding Head, Shear and Tension, 1/32 Oversize (S/S by MIL-DTL-85069)
• MIL-DTL-85069/7 – Sleeves, Fastener, Grooved, 100 Degrees Flush Reduced Head, Shear, 1/32 Oversize (S/S by MIL-DTL-85069)
• MIL-DTL-85069/8 – Sleeves, Fastener, Grooved, 100 Degrees Flush Head, 1/32 Oversize (S/S by MIL-D-85069)
• MIL-DTL-85069/9 – Sleeves, Fastener, Grooved, 100 Degrees Flush Full Head, Tension, 1/32 Oversize (S/S by MIL-DTL-85069)
• MIL-R-2327 – RING, CONNECTING, ROUND (NO S/S DOCUMENT)
• MIL-S-70334 – Shim, Solid (No S/S Document)
• MIL-S-70334/1 – Shim, Solid, Round (S/S By A-A-59561)
• MIL-S-70344 – SHIM, LAMINATED, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
• MIL-S-70344/1 – SHIM, LAMINATED, ROUND, CLASS 1 (.002) LAMINATES (NO S/S DOCUMENT)
• MIL-S-70344/2 – SHIM, LAMINATED, ROUND, CLASS 2 (.003) LAMINATES (NO S/S DOCUMENT)
• MIL-S-85069/1 – Sleeves, Fastener, Grooved, Reliability and Maintainability (Repair and Maintenance) Requirements for (S/S by Mil-DTL-85069)
• MIL-STD-1756 – RING, RETAINING, PREFERRED FOR DESIGN, LISTING OF (NO S/S DOCUMENT)
• MS123120THRUMS123150 – Plug - Straight Thread, "O" Ring Seal, Aluminum (See Notice 1 for Replacement Information)
• MS25086 – Ring, Retaining
• MS35844 – Plug, Machine Thread, Magnetic: Drain (S/S by MIL-DTL-32373)
• MS51925 – Ring, Dee-Medium (S/S by MIL-DTL-3390)
• MS51990 – RING, LOCK, SERRATED (S/S BY A-A-59558)
• MS51997 – Ring, Lock, Serrated-High Strength (S/S by SAE-AS51997)
• MS9015 – Plug, Machine Threaded - "O" Ring Seal
• MS9404 – Plug, Machine Thread - AMS 5646, Preformed Packing
• MS9902 – PLUG, MACHINE THREAD - DRILLED, AMS 5646, PREFORMED PACKING, MIL-S-8879 THREAD (S/S BY SAE-AS9902)
• NAS1056 – Spacer, Sleeve - Rivet, High Temperature, Non Magnetic
• NAS1057 – Spacer, Sleeve - Screw and Bolt, High Temperature, Non Magnetic
• NAS1195 – Shim, Miniature Anchor Nut
• NAS186 – Spacer, Stepped, Swage Type
• NAS42 – Spacer, Sleeve - Rivet
• NAS43 – Spacer, Sleeve - Screw and Bolt
• NAS47 – Spacer, Sleeve, Non Metallic, Screw and Bolt
• SAE-AMS4174 – Aluminum Alloy, Flash Welded Rings 5.6zn - 2.5mg - 1.6cu - 0.23cr (7075-t73) Solution And Precipitation Heat Treated
• SAE-AMS4311 – Aluminum Alloy, Rolled Or Forged Rings 5.6zn - 2.5mg - 1.6cu - 0.23cr (7075-t7351, 7075-t7352) Solution Heat Treated, Mechanically Stress Relieved, And Precipitation Heat Treated
• SAE-AMS7325 – RING, SEALING, TUBULAR METAL, CORROSION AND HEAT RESISTANT STEEL (NO S/S DOCUMENT)
• SAE-AMS7488 – Rings, Flash Welded Aluminum and Aluminum Alloys
• SAE-AMS7493 – Rings, Flash Welded Ferritic and Martensitic Corrosion-Resistant Steels resistant STEELS",
• SAE-AMS7496 – Rings, Flash Welded Carbon and Low-Alloy Steels
• SAE-AMS7498 – Rings, Flash Welded Titanium and Titanium Alloys
• SAE-AS3215 – Ring, Retaining-Spiral, Internal, Heavy Duty, Cres
• SAE-AS3216 – Ring, Retaining-Spiral, External, Heavy Duty, Cres
• SAE-AS3217 – Ring, Retaining-Spiral, Internal, Light Duty, Cres
• SAE-AS3218 – Ring, Retaining-Spiral, External, Light Duty, Cres
• SAE-AS3219 – Ring, Retaining, Spiral, Minimum Distortion, Dimensional and Acceptance Standard for
• SAE-AS3435 – Spacer, Sleeve, for .190 Inch Bolt, AMS4901 or AMS4921
• SAE-AS3436 – Spacer, Sleeve-for .250 Inch Bolt,, AMS4901 or AMS4921
• SAE-AS3472 – Ring, Retaining-Internal, Spiral Wound Heavy and Medium Duty, UNS S66286
• SAE-AS4299 – Rings, Retaining - Spiral Wound, Uniform Section Corrosion and Heat Resistant, UNS S66286
• SAE-AS51990 – Ring, Lock, Serrated
• SAE-AS51997 – Ring, Lock, Serrated-High Strength
• SAE-AS9902 – Plug, Machine Thread Drilled, Preformed Packing, AS8879 Thread (UNS S34700)
• SAE-J532 – Drain Plugs and Thread Filler, Automotive Straight
• SAE-MA3437 – Spacer, Sleeve-for 5MM Bolt, AMS4901 or AMS4921, Metric
• SAE-MA3438 – Spacer, Sleeve-for 6MM Bolt, AMS4901 or AMS4921, Metric
• SAE-MA4016 – Ring, Retaining-External, Spiral Wound, Heavy and Medium Duty CRES, Metric
• SAE-MA4017 – Ring, Retaining - Internal, Spiral Wound, Heavy and Medium Duty CRES, Metric
• SAE-MA4020 – Ring, Retaining, External, Tapered, Type I, Class 2, AMS 5520, Metric
• SAE-MA4021 – Ring, Retaining, Internal, Tapered, Type I, Class I, AMS 5520, Metric
• SAE-MA4029 – Ring, Retaining - Internal, Beveled, Tapered, Type II Class 1 AMS 5520, Metric
• SAE-MA4030 – Ring, Retaining, External, Reinforced, E-Ring, Type I, Class 3, AMS 5520, Metric
• SAE-MA4035 – Rings, Retaining - Spiral Wound, Uniform Section, Corrosion Resistant, Procurement Specification for, Metric
• SAE-MA4036 – Rings, Retaining - Tapered Width, Uniform Thickness, Corrosion Resistant, Procurement Specification for, Metric