FSC-5340: Hardware, Commercial

Documents

• MIL-S-2578 – SNAPHOOK, FIXED LOOP, 3/8, 1/2, 5/8, 3/4, 1 AND 1-1/2 INCH (S/S BY MIL-S-43770)
• MIL-S-3960 – Strap, Retaining, (Use FF-S-760)
• MIL-S-43353 – SNAP HOOK, TRIGGER TYPE, FIXED LOOP EYE, 3/4 INCH (NO S/S DOCUMENT)
• MIL-S-43384 – SNAPHOOK, 1 INCH, FIXED LOOP, RIVETED SPRING CLOSURE (S/S BY MIL-S-43770)
• MIL-S-43403 – SNAPHOOK, 3/4 INCH SWIVEL EYE, WITH PIVOT CLOSURE (S/S BY MIL-S-43770)
• MIL-S-43770 – SNAP HOOKS GENERAL SPECIFICATION FOR (S/S BY NASM43770)
• MIL-S-43770/1 – SNAP HOOK, WIRE BODY, FIXED LOOP EYE, FLAT SPRING CLOSURE, WITH RETAINER (S/S BY NASM43770/1)
• MIL-S-43770/10 – SNAP HOOK, CAST BODY, FIXED LOOP EYE W/O ROLLER, FLAT SPRING CLOSURE, WIDE MOUTH (S/S BY NASM43770/10)
• MIL-S-43770/11 – SNAP HOOK, CAST BODY, FIXED LOOP EYE W/O ROLLER, FLAT SPRING CLOSURE, LIGHT DUTY (S/S BY NASM43770/11)
• MIL-S-43770/12 – SNAP HOOK, CAST BODY, FIXED ROUND EYE W/O ROLLER, FLAT SPRING CLOSURE (S/S BY NASM43770/12)
• MIL-S-43770/13 – SNAP HOOK, CAST BODY, FIXED LOOP EYE W/O ROLLER, FLAT SPRING CLOSURE, NARROW MOUTH (S/S BY NASM43770/13)
• MIL-S-43770/14 – SNAP HOOK, CAST BODY, OPEN EYE, SLIDING BOLT CLOSURE (S/S BY NASM43770/14)
• MIL-S-43770/2 – SNAP HOOK, WIRE BODY, FIXED LOOP EYE, SIDE RETAINING CLOSURE (S/S BY NASM43770/2)
• MIL-S-43770/3 – SNAP HOOK, CAST BODY, FIXED LOOP EYE WITH ROLLER, FLAT SPRING CLOSURE, NARROW MOUTH (S/S BY NASM43770/3)
• MIL-S-43770/4 – SNAP HOOK, CAST BODY, FIXED LOOP EYE WITH ROLLER, FLAT SPRING CLOSURE, WIDE MOUTH (S/S BY NASM43770/4)
• MIL-S-43770/5 – SNAP HOOK, CAST BODY, FIXED EYE, SLIDING BOLT CLOSURE (S/S BY NASM43770/5)
• MIL-S-43770/6 – SNAP HOOK, CAST BODY, SWIVEL EYE, SLIDING BOLT CLOSURE (S/S BY NASM43770/6)
• MIL-S-43770/7 – SNAP HOOK, CAST BODY, LOOP EYE SWIVEL (S/S BY NASM43770/7)
• MIL-S-43770/8 – SNAP HOOK, CAST BODY, ROUND EYE SWIVEL (S/S BY NASM43770/8)
• MIL-S-43770/9 – SNAP HOOK, CAST BODY, FIXED LOOP EYE, TRIGGER CLOSURE (S/S BY NASM43770/9)
• MIL-S-6715 – Spring, Helical, Aircraft
• MIL-STD-1758 – INSERT, SCREW THREAD, PREFERRED FOR DESIGN, LISTING OF (NO S/S DOCUMENT)
• MIL-STD-763 – Locking Devices
• MIL-T-22745 – TURNBUCKLE, FORGED STEEL, GALVANIZED, WELDLESS (S/S BY FF-T-791)
• MIL-T-5684 – Tie Rod: Round and Square, Aircraft (No S/S Document)
• MIL-T-5685 – TURBUCKLE, AIRCRAFT (NO S/S DOCUMENT)
• MIL-T-63960 – Tiedown, Web, Special Purpose (No S/S Document)
• MIL-T-81364 – T-BOLT, 180,000 PSI, TYPE 431 STAINLESS STEEL, MANUFACTURING PROCESS REQUIREMENTS (NO S/S DOCUMENT)
• MS122900THRUMS122939 – CLAMP LOOP TYPE SUPPORT (HEAT RESISTANT) .204 HOLE (S/S BY SAE-AS122900THRUAS122939)
• MS14108 – FASTENER, POSITIVE SELF-LOCKING CASE MOUNTING, ELECTRONIC EQUIPMENT (S/S BY MIL-F-85731/1)
• MS14109 – FASTENER, POSITIVE SELF-LOCKING CASE MOUNTING, ELECTRONIC EQUIPMENT (WITH HOLDING CLAMP)
• MS14198 – LOCK, ROD END, EXTRA STRENGTH, HIGH PROFILE LUG (S/S BY NASM14198)
• MS14227 – LOCK, ROD END, IMPROVED STRENGTH, NAS LUG (S/S BY SAE-AS14227)
• MS14271 – Handle, Coupling, Pneumatic Starter
• MS15018 – HANDLE, RECESS, BRASS (FOR METAL FURNITURE)
• MS15019 – CATCH, PUSH BUTTON (FOR METAL FURNITURE)
• MS15020 – HANDLE, T, 2-1/2-INCH, AND NUT (FOR METAL FURNITURE)
• MS15021 – HANDLE, T, 2-INCH, AND NUT (FOR METAL FURNITURE)
• MS15022 – CATCH, FRICTION (FOR METAL FURNITURE)
• MS15027 – LOCK, INSTALLATION OF (FOR METAL FURNITURE DRAWERS)
• MS15029 – BUMPER (FOR METAL FURNITURE) (FOR SHIPBOARD USE)
• MS15030 – HASP AND KEEPER (FOR METAL FURNITURE)
• MS15090 – LEVER HANDLE, LOCK (FOR CLOTHES AND CLEANING GEAR LOCKERS)
• MS15091 – KEEPER, HANDLE, LOCK (FOR CLOTHES AND CLEANING GEAR LOCKERS)
• MS15092 – LATCH, STEEL (FOR CLOTHES AND CLEANING GEAR LOCKERS)
• MS15093 – STRAP, STEEL (FOR CLOTHES AND CLEANING GEAR LOCKERS)
• MS15094 – CAM STEEL (FOR CLOTHES AND CLEANING GEAR LOCKERS)
• MS15095 – ESCUTCHEON, LOCK SET PART (FOR CLOTHES AND CLEANING GEAR LOCKERS)
• MS15096 – T HANDLE WITH HEXAGON NUT, STEEL (FOR METAL SAFE LOCKER, TYPE NOS. 1, 3, 4, AND 6)
• MS15097 – KNOB, NICKEL-PLATED BRASS (FOR DRAWER LATCH FOR METAL FURNITURE)
• MS16227 – CHANNEL, DRAWER AND CASE FOR METAL FURNITURE
• MS16652 – DRAWER PULL-LATCH, METAL FURNITURE
• MS16993 – Plug, Fusible, Refrigerant - 12
• MS17821 – Strap, Cable, Adjustable, Self-Clinching, Plastic, Type I, Class I (Use MS3367)
• MS17822 – Strap, Cable, Identification, Adjustable, Self-Clinching Plastic, Type II, Class I (Use MS3368)
• MS18012 – Handle, Metal, Spring Bail Type
• MS18012/(an interim amendment also exists for this document number as MS18012A(I1)) – Handle, Metal, Spring Bail Type
• MS18012/(the base document for this interim amendment is MS18012A(1) NOT 3) – Handle, Metal, Spring Bail Type
• MS18015 – Catch, Clamping and Strike (Concealed Spring Type)
• MS18018 – SEAL, LEAD (S/S BY MS 51938)
• MS18034 – STRAP, CABLE, ADJUSTABLE, PLASTIC, TYPE I, CLASS 2 (USE MS 3367)
• MS18035 – STRAP, CABLE, IDENTIFICATION ADJUSTABLE, PLASTIC, TYPE 2, CLASS2 (USE MS 3368)
• MS18072 – RING, HANDLING, AIR START COUPLING (S/S BY MS-14271)
• MS20000 – TURNBUCKLE ASSEMBLY - PIN EYE, LEFT AND RIGHT HAND
• MS20001 – Hinge, Butt Structural, Extruded
• MS20257 – Hinge, Continuous
• MS21103 – CLAMP, PLAIN, SUPPORT, LOOP, AIRCRAFT, TYPE 1 CLASS A & B (USE AN 742)
• MS21104 – CLAMP, LOOP, CUSHIONED, WEDGE, FUEL, WEATHER RESISTANT, 212 DEG. F. TYPE II, CLASS A AND B (S/S BY MS21919)
• MS21105 – CLAMP, LOOP, CUSHIONED, WEDGE, FLUID RESISTANT, 500 DEG. F, CRES, TYPP III, CLASS B (S/S BY MS21105)
• MS21106 – Clamp, Loop, Cushioned, 1200 Degrees F, Cres Type IV, Class B
• MS21126 – Spacer, Grooved, Self-Retaining Bolt, Aluminum Alloy
• MS21128 – SPACER, GROOVED, SELF-RETAINING BOLT, CRES
• MS21310 – BOLT, HOOK, SUPPORT DRIVE FETTER THREAD (POLE LINE) (NO S/S DOCUMENT)
• MS21312 – Handwheel - Revolving Handle With Keyway
• MS21313 – PADLOCK SETS - INDIVIDUALLY KEYED AND KEYED ALIKE (S/S BY A-A-59486)
• MS21314 – STRAP, RETAINING, TWO HOLE, FOR PIPE, CONDUIT, AND CABLE (S/S BY NASM21314)
• MS21315 – STRAP, RETAINING, TWO HOLE, FOR TUBING (S/S BY NASM21315)
• MS21322 – CLAMP, LOOP-ALUMINUM, PLAIN AND CUSHIONED (S/S BY NASM21322)
• MS21333 – CLAMP, LOOP-STEEL-PLAIN AND CUSHIONED (S/S BY NASM21333)
• MS21334 – CLAMP, LOOP-DOUBLE, CABLE OR TUBE, STEEL, PLAIN AND CUSHIONED (S/S BY NASM21334)
• MS21919 – Clamp, Loop Type, Cushioned, Support
• MS24373 – CASTER, RIGID AND SWIVEL, PRECISION PNEUMATIC TIRED (S/S BY NASM24373)
• MS24374 – CASTER, RIGID AND SWIVEL, PRECISION, SPRING MOUNTED (S/S BY NASM24374)
• MS24380 – CASTER, INDUSTRIAL (S/S BY A-A-55617, A-A-55618, A-A-55619)
• MS24535 – Fastener-Container Closure
• MS24563 – COUPLING FLANGES, V-BAND, PROFILE DIMENSIONS FOR (S/S BY SAE-AS24563)
• MS25281 – CLAMP, LOOP, PLASTIC, WIRE SUPPORT (S/S BY SAE-AS25281)
• MS26509 – MOUNT, RESILIENT, CUP TYPE, SPECIFIC LOAD, CLASS 1
• MS26510 – MOUNT, RESILIENT, CUP TYPE, SPECIFIC LOAD, CLASS 2
• MS26511 – MOUNT, RESILIENT, CUP TYPE, TWO TO ONE LOAD RANGE, CLASS 1
• MS26512 – MOUNT, RESILIENT, CUP TYPE, TWO TO ONE LOAD RANGE, CLASS 2
• MS26513 – MOUNT, RESILIENT, PLATE TYPE
• MS27114 – COUPLING, CLAMP, GROOVED, V BAND, 1.750 TO 14.250 FLANGE OD, (MINUS 65 DEG. TO PLUS 800 DEG. F) (S/S BY MIL-DTL-27536/1)
• MS27115 – COUPLING, CLAMP, GROOVED, V BAND, 1.750 TO 6.250 FLANGE OD (MINUS 450 DEG. TO PLUS 200 DEG. F) (S/S BY MIL-DTL-27536/2)
• MS27116 – COUPLING, CLAMP, GROOVED, V BAND, 1.750 TO 14.250 FLANGE OD (MINUS 320 DEG. TO PLUS 1500 DEG. F) (S/S BY MIL-DTL-27536/3)
• MS27117 – COUPLING, CLAMP, GROOVED, V BAND, 14.250 TO 24.250 FLANGE OD, (MINUS 320 DEG. TO PLUS 1500 DEG. F) (NO S/S DOCUMENT)
• MS27118 – COUPLING, CLAMP, GROOVED, V BAND, 24.250 TO 40.250 FLANGE OD (MINUS 320 DEG. TO PLUS 1500 DEG. F) (NO S/S DOCUMENT)
• MS27120 – CLEVIS, ROD ENG&TURNBUCKLE (GENERAL PURPOSE) (S/S BY NASM27120)
• MS27149 – Casters, Rigid and Swivel, Precision, Heavy Duty
• MS27281 – CASTER, RIGID AND SWIVEL, PRECISION, SPRING MOUNTED, PNEUMATIC TIRED (NO S/S DOCUMENT)