FSC-5307: Studs– Page 2 | Standards Central

MIL-S-24149/1 – Stud, Welding, and Arc Shields (Ferrules); Type I, Class 1, 2, 3, and Type II, Class 1, 4, 5, 5A, 6, Carbon Steel, for Direct Energy, Arc Welding

MIL-S-24149/2 – Studs, Welding, and Arc Shields (Ferrules); Type III, Class 1, 2, 3, 4, 5, 6, Aluminium Alloy, for Direct Energy Arc Welding

MIL-S-24149/3 – Studs, Welding, & Arc Shields (Ferrules); Type V, Class 1, 4, 5, 5A, Corrosion- Resistant Steel, for Direct Energy Arc Welding

MIL-S-24149/4 – Studs, Welding, Type VI, Class 1, 2, 3, Carbon Steel, for Stored Energy (Capacitor Discharge) Arc Welding

MIL-S-24149/5 – Studs, Welding, Type VII, Class 1, 2, 3, Aluminium Alloy, for Stored Energy (Capacitor Discharge) Arc Welding

MIL-S-24149/6 – Studs, Welding, Type VIII, Class 1, 2, 3, Corrosion-Resistant Steel for Stored Energy (Capacitor Discharge) Arc Welding

MIL-S-45909 – STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR (S/S BY NASM45909)

MIL-S-45915 – STUD, LOCKED IN - KEY LOCKED, GENERAL SPECIFICATION FOR (S/S BY NASM45915)

MIL-S-45933 – STUD, KEYRING LOCKED, 125 AND 160 KSI FTU, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)

MIL-S-45933/1 – STUD, KEYRING LOCKED, 125 KSI FTU, SINGLE STEP (NO S/S DOCUMENT)

MIL-S-45933/2 – STUD, KEYRING LOCKED, 160 KSI FTU, MULTIPLE STEP (NO S/S DOCUMENT)

MIL-S-45933/3 – STUD, KEYRING LOCKED, HOLE DIMENSIONS FOR AND ASSEMBLY OF (NO S/S DOCUMENT)

MIL-S-63540 – STUD, SELF-CLINCHING, GENERAL SPECIFICATION FOR (S/S BY NASM63540)

MIL-S-63540/1 – Stud, Self-Locking, Flush Head, Ribbed Clinch Type (S/S by NASM63540/1)

MIL-S-63540/2 – Stud, Self-Locking, Flush and Protruding Head (S/S by NASM63540/2)

MIL-S-63540/3 – STUD, SELF-CLINCHING, FLUSH HEAD, HEX CLINCH TYPE (S/S BY NASM63540/3)

MIL-S-63540/4 – STUD, SELF-LOCKING, CONCEALED HEAD, KNURLED CLINCH TYPE (S/S BY NASM63540/4)

MIL-S-63540/5 – STUD, SELF-LOCKING, CONCEALED HEAD, HEX CLINCH TYPE (S/S BY NASM63540/5)

MIL-S-63540/6 – Stud, Self-Locking, Non-Flush, Ribbed Clinch Type (S/S by NASM63540/6)

MIL-S-63540/7 – STUD, SELF-LOCKING, BROACHING TYPE (S/S BY NASM63540/7)

MIL-STD-1598 – STUDS PREFERRED FOR DESIGN, LISTING OF (NO S/S DOCUMENT)

MS15824 – STUDS,(BOLT-STUDS), CONTINUOUS THREAD, B7A AND B14 ALLOY STEEL, HIGH TEMPERATURE SERVICE, 875 F, MAXIMUM (S/S MS16187)

MS15986 – STUD, PLAIN, STEEL, FULL BODY, GENERAL PURPOSE (USE MS51864)

MS15987 – STUD, PLAIN, BRASS, FULL BODY, GENERAL PURPOSE (USE MS51864)

MS15988 – STUD, PLAIN, NICKEL COPPER ALLOY, FULL BODY, GENERAL PURPOSE

MS15989 – STUD, PLAIN, STEEL, REDUCED BODY, GENERAL PURPOSE (USE MS51864)

MS15990 – STUD, PLAIN, BRASS, REDUCED BODY, GENERAL PURPOSE (USE MS51864)

MS15991 – STUD, PLAIN, NICKEL COPPER ALLOY, REDUCED BODY, GENERAL PURPOSE (USE MS51864)

MS16187 – STUD, CONTINOUS THREAD (BOLT-STUD), B16 ALLOY STEEL HIGH TEMPERATURE SERVICE (875 D EG-1000 DEG F) (S/S BY NASM16187)

MS17293 – STUD-STEPPED, 1.5 DIA ENGAGEMENT, 0.250-20 X 0.190-32 (NO S/S DOCUMENT)

MS17294 – STUD-STEPPED, 1.5 DIA ENGAGEMENT, .3125-18 X 250-28 (MIL-S-8879 THREAD)

MS17295 – STUD STEPPED, 1.5 DIA ENGAGEMENT, .375-16 X .3125-24 (MIL-S-8879 THREAD)

MS17296 – STUD-STEPPED, 1.5 DIA ENGAGEMENT, .4375-14 X .375-24 (MIL-S-8879 THREAD)

MS17297 – STUD-STEPPED, DRILLED, 1.5 DIA ENGAGEMENT, .3125-18 X .250-28 (MIL-S-8879 THREAD) (NO S/S DOCUMENT)

MS17298 – STUD-STEPPED, DRILLED, 1.5 DIA ENGAGEMENT, 0.375-16 X 0.3125-24 (MIL-S-8879 THREAD) (NO S/S DOCUMENT)

MS17299 – STUD-STRAIGHT .190-24 X .190-32 (MIL-S-8879 THREAD)

MS17300 – STUD-STRAIGHT, .250-20 X .250-28 (MIL-S-8879 THREAD)

MS17301 – STUD-STRAIGHT, .3125-18X .3125-24 (MIL-S-8879 THREAD)

MS17302 – STUD-STRAIGHT, DRILLED, .250-20 X .250-28 (MIL-S-8879 THREAD) (NO S/S DOCUMENT)

MS17303 – STUD-STRAIGHT, DRILLED, .3125-18 X .3125-24 (MIL-S-8879 THREAD) (NO S/S DOCUMENT)

MS18116 – Bolt, Stud, and Socket Cap Head Screw, Nickel-Copper-Aluminum Alloy (S/S by MIL-DTL-1222)

MS27951 – Stub (Stud), Welding-Turnbuckle (General Purpose, Manual Weld Application) (No S/S Document)

MS51497 – STUD, LOCKED IN-RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER

MS51551 – Stud, Locked In - Ring Locked, Serrated, UNJF Thread Nut End, Increased Stud End Length

MS51833 – STUD, LOCKED IN, KEY-LOCKED, LIGHTWEIGHT (S/S BY NASM51833)

MS51834 – STUD, LOCKED IN, KEY-LOCKED, HEAVY DUTY (S/S BY NASM51834)

MS51864 – Stud-Plain, General Purpose (S/S by NASM51864)

MS51950 – STUD, SHOULDERED: WHEEL MOUNTING

MS51951 – STUD, SHOULDERED AND STEPPED: WHEEL MOUNTING

MS51989 – Stud, Locked in-Ring Locked, Serrated (S/S by SAE-AS51989)

MS51992 – STUD, LOCKED IN-RING LOCKED, SERRATED, HIGH STRENGTH (S/S BY SAE-AS51992)

MS52122 – STUD, SHOULDERED AND STEPPED. WHEEL MOUNTING (NO S/S DOCUMENT)

MS9303 – STUD, SHOULDERED, HEXAGON WRENCHING, STEEL, .190-32 NF-3A X.190-32 NF-3A (S/S BY SAE-AS9303)

MS9304 – STUD, SHOULDERED AND STEPPED, HEXAGON WRENCHING, STEEL, .190-32 NF-3A X .250-28 UNF-3A (S/S BY SAE-AS9304)

MS9305 – STUD, SHOULDERED, HEXAGON WRENCHING, STEEL, .250-28 UNF-3A X .250-28 UNF-3A (S/S BY SAE-AS9305)

MS9306 – STUD, SHOULDERED AND STEPPED, HEXAGON WRENCHING, STEEL, .250-28 UNF-3A X .3125-24 UNF-3A (S/S BY SAE-AS9306)

MS9307 – STUD, SHOULDERED & STEPPED, HEXAGON WRENCHING, STEEL, .250-28 UNF-3A X .375-24 UNF-3A (S/S BY SAE-AS9307)

MS9308 – STUD, SHOULDERED, HEXAGON WRENCHING, DRILLED, STEEL, .190-32 NF-3A X .190-32 NF-3A (S/S BY SAE-AS9308)

MS9309 – STUD, SHOULDERING & STEPPED, HEXAGON WRENCHING, DRILLED, STEEL, .190-32 UNF-3A X .250-28 UNF-3A (S/S BY SAE-AS9309)

MS9310 – STUD, SHOULDERED, HEXAGON WRENCHING, DRILLED, STEEL, .250-28 UNF-3A X .250-28 UNF-3A (S/S BY SAE-AS9310)

MS9311 – STUD, SHOULDERED & STEPPED, HEXAGON WRENCHING, DRILLED, STEEL, .250-28 UNF-3A X .3125-24 UNF-3A (S/S BY SAE-AS9311)

MS9312 – STUD, SHOULDERED & STEPPED, HEXAGON WRENCHING, DRILLED, STEEL, .250-28 UNF-3A X .375-24 UNF-3A (S/S BY SAE-AS9312)

MS9827 – STUD-STEPPED, 2 DIA. ENGAGEMENT, STEEL, 0.250-20 UNJS X 0.190-32 UNJF (NO S/S DOCUMENT)

MS9828 – STUD-STEPPED, 2 DIA. ENGAGEMENT, STEEL 0.3125-18 UNJS X 0.250-28 UNJF (NO S/S DOCUMENT)

MS9829 – STUD-STEPPED, 2 DIA. ENGAGEMENT, STEEL, 0.375-16 UNJS X 0.3125-24 UNJF (NO S/S DOCUMENT)

MS9830 – STUD-STEPPED, 2 DIA. ENGAGEMENT, STEEL, 0.4375-14 UNJS X 0.375-24 UNJF (NO S/S DOCUMENT)

MS9831 – STUD-STEPPED, 2 DIA. ENGAGEMENT, STEEL, 0.500-13 UNJS X 0.4375-20 UNJF (NO S/S DOCUMENT)

MS9832 – STUD-STEPPED, 2 DIA. ENGAGEMENT, STEEL, 0.5625-12 UNJS X 0.500-20 UNJF (NO S/S DOCUMENT)

MS9833 – STUD-STEPPED, 2 DIA. ENGAGEMENT, STEEL, 0.625-11 UNJS X 0.5625-18 UNJF (NO S/S DOCUMENT)

MS9834 – STUD-STEPPED, DRILLED, 2 DIA. ENGAGEMENT STEEL, 0.250-20 UNJS X 0.190-32 UNJF (NO S/S DOCUMENT)

MS9835 – STUD-STEPPED, DRILLED, 2 DIA. ENGAGEMENT, STEEL, 0.3125-18 UNJS X 0.250-28 UNJF (NO S/S DOCUMENT)

MS9836 – STUD-STEPPED, DRILLED, 2 DIA. ENGAGEMENT, STEEL, 0.375-16 UNJS X 0.3125-24 UNJF (NO S/S DOCUMENT)

MS9837 – STUD-STEPPED, DRILLED, 2 D1A ENGAGEMENT STEEL, .4375-14 UNJS X .375-24 UNJF (NO S/S DOCUMENT)

MS9838 – STUD-STEPPED, DRILLED, 2 DIA. ENGAGEMENT, STEEL, 0.500-13 UNJS X 0.4375-20 UNJF (NO S/S DOCUMENT)

MS9839 – STUD-STEPPED, DRILLED, 2 DIA. ENGAGEMENT, STEEL, 0.5625-12 UNJS X 0.500-20 UNJF (NO S/S DOCUMENT)

MS9840 – STUD-STEPPED, DRILLED, 2 DIA. ENGAGEMENT, STEEL, 0.625-11 UNJS X 0.5625-18 UNJF (NO S/S DOCUMENT)

NAS183 – Stud - Coarse Thread

NAS184 – Stud, Fine Thread

NAS1841THRUNAS1854 – STUD ASSEMBLY - THREADED METAL DOUBLE STEP

NAS1860THRUNAS1863 – Stud Assembly - Threaded Metal Single Step

NAS354 – ROD - CONTROL, SOLID STEEL

NASM10971 – Pin, Spring, Tubular, (Coiled and Slotted)

NASM16187 – Stud, Continious Thread - (Bolt-Stud), B16 Alloy Steel, High Temperature Service (875-1000 Deg. F)

NASM24149 – STUDS, WELDING, AND ARC SHIELDS (FERRULES) (NO S/S DOCUMENT)

NASM24149/1 – STUD, WELDING, AND ARC SHIELDS (FERRULES); TYPE I, CLASS 1, 2, 3, AND TYPE II, CLASS 1, 4, 5, 5A, 6, CARBON STEEL, FOR DIRECT ENERGY ARC WELDING (NO S/S DOCUMENT)

NASM24149/2 – STUDS, WELDING, AND ARC SHIELDS (FERRULES); TYPE III, CLASS 1, 2, 3, AND TYPE IV, CLASS 1, 2, 3, 4, 5, 6, ALUMINUM ALLOY, FOR DIRECT ENERGY ARC WELDING (NO S/S DOCUMENT)

NASM24149/3 – STUDS, WELDING, AND ARC SHIELDS (FERRULES); TYPE V, CLASS 1, 4, 5, 5A, CORROSION-RESISTANT STEEL, FOR DIRECT ENERGY ARC WELDING (NO S/S DOCUMENT)

NASM24149/4 – STUDS, WELDING, TYPE VI, CLASS 1, 2, 3, CARBON STEEL, FOR STORED ENERGY (CAPACITOR DISCHARGE) ARC WELDING (NO S/S DOCUMENT)

NASM24149/5 – STUDS, WELDING, TYPE VII, CLASS 1, 2, 3, ALUMINUM ALLOY, FOR STORED ENERGY (CAPACITOR DISCHARGE) ARC WELDING (NO S/S DOCUMENT)

NASM24149/6 – STUDS, WELDING, TYPE VIII, CLASS 1, 2, 3, CORROSION-RESISTANT STEEL FOR STORED ENERGY (CAPACITOR DISCHARGE) ARC WELDING (NO S/S DOCUMENT)

NASM45909 – Stud, Locked In, Ring Locked, Serrated, General Specification for

NASM45915 – Stud, Locked In-Key Locked

NASM51833 – Stud, Locked in, Key-Locked, Lightweight

FSC-5307: Studs

Documents