FSC-5306: Bolts

Documents

• ASME-B18.5.2.2M – Bolt, Square Neck, Round Head, Metric
• ASTM-A320-A320M – Steel, Alloy, and Stainless Steel Bolting Materials for Low-Temperature Service
• ASTM-A325 – Bolts, Steel, Structural, Heat Treated, 120/105 KSI Minimum Tensile Strength  (No S/S Document)
• ASTM-A325M – BOLTS, STRUCTURAL, STEEL, HEAT TREATED 830 MPA MINIMUM TENSILE STRENGTH (METRIC) (NO S/S DOCUMENT)
• ASTM-A394 – Steel Transmission Tower Bolts, Zinc-Coated and Bare
• ASTM-A453-A453M – Materials, Bolting, High-Temperature, with Expansion Coefficients to Austenitic Stainless Steel
• ASTM-A489 – Standard Specification for Carbon Steel Eyebolts
• ASTM-A490 – Bolts, Structural, Alloy Steel, Heat Treated, 150 KSI Minimum Tensile Strengths (No S/S Document)
• ASTM-A490M – Bolts, Steel, High-Strength, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric ) 1 (No S/S Document)
• ASTM-F541 – Eyebolts, Alloy Steel
• ASTM-F704 – Joints, Flanged, Selecting Bolting Lengths for Piping System
• DOD-B-63475 – Bolt, Shoulder, Hexagon Head, General Specification for, METRIC (No S/S Document)
• DOD-B-63475/1 – Bolt, Shoulder, Hexagon Head, Long Thread, METRIC (No S/S Document)
• DOD-B-63475/2 – Bolt, Shoulder, Hexagon Head, Short Thread, METRIC (No S/S Document)
• DOD-B-63545 – Bolts, Ribbed Shoulder, Wheel Mounting, Metric General Specification for (No S/S Document)
• DOD-B-63545/1 – Bolt, Ribbed Shoulder, Wheel Mounting, Metric (No S/S Document)
• DOD-B-63545/2 – Bolt, Ribbed Shoulder, Extended Shoulder, Wheel Mounting, Metric (No S/S Document)
• DOD-B-70331 – Bolt, Self Locking, Hexagon Head, Steel, Metric, General Specification for
• DOD-B-70331/1 – Bolt, Self Locking, Hexagon Head, Steel, SAE J1199 (10.9) Type B, Metric
• DOD-B-70331/2 – Bolt, Self Locking, Hexagon Head, Steel, SAE J1199 (10.9) Type BH, M
• DS51417 – Bolt, Machine, Hex Head Fully Threaded, Fine Thread, Metric (S/S by NASM51417)
• FF-B-186 – Bearings, Roller (S/S by FF-B-185 and FF-B-187)
• FF-B-561 – Bolts, (Screw), Lag (S/S by ASME-B18.2.1 and ASME-B18.18.1M)
• FF-B-571 – Bolts, Nuts, Studs, and Tap  Rivets (and Material for Same) (S/S by FF-B575, FF-B584, FF-N-836 and FF-S-1362)
• FF-B-575 – Bolt, Hexagon and Square
• FF-B-584 – Bolts, Square Neck and Tee Head (S/S by ASME-B18.5, ASME-B18.9, and ASME-B18.18.1M)
• FF-B-588 – Bolt, Toggle: and Expansion Sleeve, Screw (No S/S Document)
• MIL-B-18695 – Bolts and Nuts, Plow, Pole Line, Hook, and Should (S/S by MIL-H-55053)
• MIL-B-23964 – Bolt, Self-Retaining, Positive Locking (S/S by NASM23964)
• MIL-B-2938 – Bolts and Nuts, Deck
• MIL-B-30504 – Bolt, Suspension, Airdrop
• MIL-B-3964 – Bolts and Nuts, Track (S/S by ANSI B18.10)
• MIL-B-45908 – Bolt, Eye, General Specification for (S/S by NASM45908)
• MIL-B-52796 – Bolts, Ribbed Neck, Structural Type, with Recessed Locknut (No S/S Document)
• MIL-B-6461 – Bolts, Aircraft Engine and Propeller
• MIL-B-6812 – Bolts, Aircraft (S/S by NASM6812)
• MIL-B-70332/2 – Bolt, Shouldered (Bolt Assembly, Clamp) (No S/S Document)
• MIL-B-7838 – Bolt, Internal Wrenching, 160 KSI FTU (S/S by NASM7838)
• MIL-B-7874 – Bolt, Machine, 1200 Degrees F (S/S by NASM7874)
• MIL-B-83050 – Bolt, Self-Retaining, Impedance Type (S/S by NASM83050)
• MIL-B-85604 – Bolt, Nickel Alloy 718, Tension, High Strength, (125 KSI FSU and 220 KSI FTU) High Temperature, Spline Drive, General Specification for (S/S by NASM85604)
• MIL-B-85667 – Bolt, Sleeve, Straight Shank, Protruding and Flush Head, General Specification for (No S/S Document)
• MIL-B-85667/1 – Bolt, Sleeve, Straight Shank, Protruding and Flush Head, Reliability and Maintainability Requirements for (No S/S Document)
• MIL-B-85667/10 – Bolt, Sleeve, 100 Degrees Tension Flush Head, Straight Shank, CRES 304 Sleeve, CRES A-286 Pin, 160 KSI FTU, 450 Degrees F (No S/S Document)
• MIL-B-85667/11 – Bolt, Sleeve, 100 Degrees Tension Flush Head, Straight Shank, Nickel-CRES 304 Sleeve, Nickel-Alloy 718 Pin, 220 KSI FTU, 450 Degrees F (No S/S Document)
• MIL-B-85667/13 – Bolt, 100 Degrees Tension Flush Head, Straight Shank, Aluminum Alloy Sleeve, Titanium Alloy Pin, 95 KSI FSU, 160 KSI FTU (No S/S Document)
• MIL-B-85667/2 – Bolt, Sleeve, 100 Degree Reduced Flush Head, Straight Shank, CRES 304 Sleeve, CRES PH 13-8MO Pin, 125 KSI FSU (No S/S Document)
• MIL-B-85667/4 – Bolt, Sleeve, 100 Degrees Reduced Flushed Head, Straight Shank, Titanium Alloy Pin, 95 KSI FSU (No S/S Document)
• MIL-B-85667/6 – Bolt, Sleeve, 100 Degrees Reduced Flushed Head, Straight Shank, CRES 304 Sleeve, Nickel Alloy 718 Pin, 125 KSI FSU, 450 Degrees F (No S/S Document)
• MIL-B-85667/8 – Bolt, Sleeve, 100 Degrees Reduced Flush Head, Straight Shank, CRES 304 Sleeve, CRES A-286 Pin, 95 KSI FSU, 450 Degrees F (No S/S Document)
• MIL-B-85667/9 – Bolt, Sleeve, Protruding Head, Straight Shank, CRES 304 Sleeve, CRES A-286 Pin, 95 KSI FSU, 160 KSI FTU, 450 Degrees F (No S/S Document)
• MIL-B-857 – Bolt, Nuts, and Studs (S/S by MIL-DTL-1222)
• MIL-B-87114 – Bolts, Recess Drive, General Specification for (S/S by NAS4002 and NAS4003)
• MIL-B-87114/1 – Bolts, 100 Deg. Head, Ribbed-Torq-Set Recess, Close Tolerance, Alloy Steel, Long Thread, 95 KSI FSU (No S/S Document)
• MIL-B-87114/2 – Bolts, 100 Deg. Reduced Dome Head, Ribbed-Torq-Set Recess, Close Tolerance, Alloy Steel, long Thread, 95 KSI FSU (No S/S Document)
• MIL-B-87114/3 – Bolt, Pan Head, Ribbed-Torq-Set Recess, Close Tolerance, Alloy Steel, Long Thread, 95 KSI FSU (No S/S Document)
• MIL-B-87114/4 – Bolt, Hex Head, Cross Recess, Full Thread, A-286 CRES, 160 KSI FTU (S/S by NAS1802)
• MIL-B-8831 – Bolt, 180 KSI FTU and 180 KSI FSU, 450 Degrees F Protruding and Flush Head, General Specification for (S/S by NASM8831)
• MIL-B-8831/1 – Bolt, Straight Shank, Expandable Aluminum Alloy Sleeve, Alloy Steel Pin, Reliability and Maintainability Requirements for
• MIL-B-8831/2 – Bolt, 100 Degrees Reduced Flush Head, Straight Shank, Expandable Aluminum Alloy Sleeve, Alloy Steel pin, 108 KSI FSU (No S/S Document)
• MIL-B-8831/3 – Bolt, Protruding Head, External Wrenching, Straight Shank, Expandable Aluminum Alloy Sleeve, Alloy Steel Pin, 180 KS1 FTU (No S/S Document)
• MIL-B-8831/4 – Bolt, 100 Degrees Reduced Flush Head, Low Interference, Straight Shank, Expandable Aluminum Alloy Sleeve, Alloy Steel Pin, 108 KSI FSU (No S/S Document)
• MIL-B-8831/5 – Bolt, Protruding Head, External Wrenching, Straight Shank, Low Interference, Expandable Aluminum Alloy Sleeve, Alloy Steel Pin, 180 KSI FTU (No S/S Document)
• MIL-B-8906 – Bolt, Alloy Steel, Shear and Tensile, (132 KSI FSU and 220 KSI FTU), 450 Degrees F, Spline Drive, General Specification for (S/S by NASM8906)
• MIL-B-8906/2 – Bolts, Shear, Steel, 132 KSI FSU, 450 Degrees F (S/S by NASM8906/2)
• MIL-B-8907 – Bolt, Alloy Steel, Shear and Tensile (156 KSI FSU and 260 KSI FTU, 450 Degrees F) External Wrenching, Flanged Head (S/S by NASM8907)
• MIL-DTL-15382 – Bolt, Firebrick Anchor
• MIL-DTL-45912 – Bolt, Self-Locking, Hexagon Head, Steel
• MIL-DTL-85667/12 – Bolt, Sleeve, 100 Degrees Tension Flush Head, Straight Shank, CRES 304 Sleeve, Titanium Alloy Pin, 95 KSI FU, 160 KSI FTU (No S/S Document)
• MIL-DTL-85667/3 – Bolt, Sleeve, Protruding Head, Straight Shank, CRES 304 Sleeve, CRES PH 13-8MO Pin, 220 KSI FSU (No S/S Document)
• MIL-DTL-85667/5 – Bolt, Sleeve, Protruding Head, Straight Shank, Titanium Alloy Pin, 160 KSI FTU (No S/S Document)
• MIL-DTL-85667/7 – Bolt, Sleeve, Protruding Head, Straight Shank, CRES 304 Sleeve, Nickel Alloy 718 Pin, 125 KSI FSU, 220 KSI FTU, 450 Degrees F (No S/S Document)
• MIL-P-23470 – PIN-RIVET, THREADED AND COLLAR,PIN-RIV ET, THREADED, TORQUE CONTROLLED, PRE--STRESS,SELF-LOCKING, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
• MIL-P-23470/1 – PIN RIVET, THREADED, BUTTON HEAD, STRAIGHT SHANK, CORROSION RESISTANT STEEL (NO S/S DOCUMENT)
• MIL-P-23470/14 – PIN-RIVET, BUTTON HEAD, STRAIGHT SHANK, ALUMINUM ALLOY(NO S/S DOCUMENT)
• MIL-STD-1251 – SCREW AND BOLTS PREFERRED FOR DESIGN, LISTING OF (NO S/S DOCUMENT)
• MS14157 – BOLT, WHEEL, TENSION, FLANGED STEEL, 180KSI FTU, 450 DEG. F EXTERNAL SPLINE DRIVE (S/S BY NASM14157)
• MS14163 – Bolt,Wheel, Tension, Steel 220 KSI, FTU, 450 Degrees F External Wrenching, Spline Drive, Flanged Head (Use NASM14490)
• MS14181 – BOLT, TENSION, NICKEL ALLOY 718, 220 KSI FTU, EXTERNAL WRENCHING, SPLINE DRIVE, FLANGED HEAD (S/S BY NASM14181)
• MS14490 – BOLT, WHEEL, NICKEL ALLOY 718, 220 KSI FTU, 132 KSI FSU, 450 DEG. F, EXTERNAL WRENCHING, SPLINE DRIVE, FLANGED HEAD (S/S BY NASM14490)
• MS15601 – LAMP, INCANDESCENT, A 19, MEDIUM SCREW (S/S BY MS 15586)
• MS15992 – BOLT-SELF-LOCKING, 250 DEG F
• MS15993 – BOLT-SELF-LOCKING, 250 DEG. F.
• MS15994 – BOLT-SELF-LOCKING, 250 DEG. F.
• MS15995 – BOLT-SELF-LOCKING, 250 DEG. F.
• MS15996 – BOLT-SELF-LOCKING, 250 DEG. F.
• MS15997 – BOLT-SELF-LOCKING, 250 DEG. F.
• MS15998 – BOLT-SELF-LOCKING, 250 DEG. F.
• MS15999 – BOLT-SELF-LOCKING, 250 DEG. F.
• MS16000 – BOLT-SELF-LOCKING, 250 DEG. F.
• MS16001 – BOLT-SELF-LOCKING, 250 DEG. F.
• MS16002 – BOLT-SELF-LOCKING, 250 DEG. F.
• MS16003 – BOLT-SELF-LOCKING, 250 DEG. F.
• MS16004 – BOLT-SELF-LOCKING, 250 DEG. F.
• MS16201 – Bolts, Lag, Cone Point, Countersunk Flathead, Slotted, Copper-Silicon Alloy, Nonmagnetic (No S/S Document)
• MS16202 – BOLTS, LAG, SQUARE BOLT HEAD, GIMLET OR CONE POINT, CORROSION-RESISTING STEEL, NON-MAGNETIC
• MS16204 – BOLT, FINNED NECK, COUNTERSUNK FLATHEAD, UNC-2A, NON-MAGNETIC
• MS16205 – BOLTS, MACHINE, REGULAR SEMI-FINISHED HEXAGON HEAD, COPPER-SILICON ALLOY (SILICON BRONZE), UNC-2A, NON-MAGNETIC (S/S BY NASM16205)
• MS16206 – BOLTS, MACHINE, HEXAGON HEAD, REGULAR SEMI-FINISHED, ALUMINUM ALLOY, UNC-2A NONMAGNETIC (S/S BY NASM16206)
• MS16207 – BOLTS, SQUARE NECK, (CARRIAGE BOLT), ROUND HEAD, UNC-2A, COPPER-SILICON ALLOY, NONMAGNETIC