FSC-5120: Hand Tools, Nonedged, Nonpowered

Documents

• MIL-P-15977 – PULLER, AND TEST LIGHT, FUSE (USE W-P-796)
• MIL-P-16208/(an interim revision also exists for this document number as MIL-P-0016208E NOT 1) – PUNCH AND DIE, GROMMET INSERTING (NO S/S DOCUMENT)
• MIL-P-16697 – PLIERS, PUNCH, OPHTHALMIC LENS
• MIL-P-17485 – BRUSH, WATER, MOLDER S (NAVY)
• MIL-P-1753 – PLIERS, PINCERS, SADDLERS
• MIL-P-18488 – PULLERS, FUSE (USE W-P-796)
• MIL-P-18724 – PULLER, RATCHET-LEVER, CABLE TYPE, HAND OPERATED, 3000 POUND CAPACITY
• MIL-P-19827 – Pike Pole, 10-and 14-Foot (S/S by MIL-P-43116)
• MIL-P-2000 – PINCERS, BLACKSMITHS, SHOEING
• MIL-P-22372 – PRESS, GROMMET AND EYELET AND SNAP FASTENER SETTING, BENCH MOUNTED, FOOT OPERATED (NO S/S DOCUMENT)
• MIL-P-40090 – PULLER, STEERING WHEEL
• MIL-P-40103 – PLIERS, BRAKE REPAIR (FOR REMOVING AND REPLACING BRAKE SHOE SPRINGS).
• MIL-P-43116 – PIKE, WIRE AND PIKES, POLE (NO S/S DOCUMENT)
• MIL-P-9938 – PRESS, LEAD SEAL, HAND, AND DIES
• MIL-P-9952 – PIN STRAIGHTENERS, ELECTRON TUBE, MINIATURE TYPE (USE GGG-P-00340)
• MIL-R-1731 – CLAMPS, SADDLER S STITCHING
• MIL-R-17736 – RAMMER, MOLDER S HAND, FOUNDRY
• MIL-R-43040 – REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT (NO S/S DOCUMENT)
• MIL-R-45067 – RETRIEVING TOOL, MAGNETIC (USE GGG-F-360)
• MIL-S-1255 – STAKES AND PLATES (BENCH), COPPERSMITHS , TINSMITHS , AND SHEET-METAL-WORKERS
• MIL-S-1485 – SHOVEL, HAND, FIRE
• MIL-S-15825 – Scriber, Diamond Point (S/S by A-A-52209)
• MIL-S-17044 – SCREWDRIVER, REVERSIBLE (NO S/S DOCUMENT)
• MIL-S-18190 – SMOOTHING IRONS, ASPHALT, AND HEATER, ASPHALT TOOL (USE MIL-S-28565)
• MIL-S-19106 – SCREWDRIVER, RATCHET, RIGHT ANGLE OFFSET, RIGHT AND LEFT HAND TURNING (S/S BY GGG-S-1408)
• MIL-S-21111 – SCREWDRIVERS, FLAT TIP, OFFSET, AND CROSSTIP&NONSPARKING AND NONMAGNETIC (NO S/S DOCUMENT)
• MIL-S-28565 – SMOOTHING IRONS, ASPHALT, SELF-HEATING,IMETHYLACETYLENE-PROPADIENE GAS FIRED (NO S/S DOCUMENT)
• MIL-S-330 – STICK, CRUISER, TIMBER (NO S/S DOCUMENT)
• MIL-S-446 – SPOON, MINER'S (NO S/S DOCUMENT)
• MIL-S-45179 – STITCHERS, CEMENTING AND VULCANIZING, AND ROLLERS, HAND (NO S/S DOCUMENT)
• MIL-S-4567 – SCREWDRIVERS, RATCHET, OFFSET, COMMON AND CROSSPOINT
• MIL-S-4998 – SWAGER, ARMORED CABLE TERMINAL 1-8 INCH, TYPE A&1
• MIL-S-6180 – SWAGING TOOLS, FLEXIBLE CABLE TERMINAL, HAND-OPERATED (NO S/S DOCUMENT)
• MIL-STD-1646 – Servicing Tools for Electric Contacts and Connections, Selection and use of (S/S by MIL-HDBK-1646)
• MIL-STD-230 – WRENCH, OPEN END, ADJUSTABLE, WRENCH, AUTO, ADJUSTABLE, AND WRENCH, MONKEY, CLASSIFICATION OF DEFECTS FOR
• MIL-STD-231 – WRENCH, OPEN END, FIXED, AND WRENCH, BOX, CLASSIFICATION OF DEFECTS FOR
• MIL-STD-247 – SCREW-DRIVERS AND SCREW-HOLDERS (STARTERS), CLASSIFICATION OF DEFECTS FOR
• MIL-T-11591 – TAMPER, ARMATURE COIL WINDING (NO S/S DOCUMENT)
• MIL-T-14143 – TOOLS, SETTING, FOR SNAP FASTENERS AND EYELETS
• MIL-T-21309 – TOOLS FOR INSERTING AND EXTRACTING HELICAL COIL WIRE SCREW THREAD INSERTS (S/S BY A-A-59158)
• MIL-T-22910 – TOOL, CRIMPING, HAND, FOR CRIMP STYLE ELECTRIC TERMINAL AND SHIELD FERRULE (NO S/S DOCUMENT)
• MIL-T-22910/1 – Tool, Hand, Kit Case, for 22910/2 and 22910/3 Crimping Tools and Dies (S/S by MIL-T-22910/6)
• MIL-T-22910/2 – Tool, Hand, Eight Inch, with Removable Die, for Two Piece Shield Terminating Ferrule (S/S by MIL-T-22910/7)
• MIL-T-22910/3 – Tool, Hand, Twelve Inch, with Removable Dies for Two Piece Shield Terminating Ferrules (S/S by MIL-T-22910/7)
• MIL-T-22910/6 – TOOL, KIT CASE FOR 22910/7 CRIMPING TOOLS AND DIES (S/S BY MIL-C-22520/9)
• MIL-T-22910/7 – TOOL, HAND, 10.75 INCH, WITH REMOVEABLE DIES FOR TWO PIECE SHIELD TERMINATING PERRULES (S/S BY MIL-C-22520/5)
• MIL-T-4572 – TOOL, INSERTING, TIRE VALVE STEM (SUPERSEDES 50484)
• MIL-T-45832 – TESTER, SPRING, RESILIENCY (FOR DISTRIBUTOR BREAKER ARMS AND GENERATOR AND STARTING MOTOR BRUSHES SPRING TENSION) (S/S BY MIL-T-43560)
• MIL-T-4901 – TOOL, IGNITION CABLE FERRULE CRIMPER, TYPE A&1 (SUPERSEDES 50480)
• MIL-T-55619 – TOOL, CRIMPING, FOR COAXIAL, RADIO FREQUENCY, CONNECTORS, GENERAL SPECIFICATION FOR (S/S BY MIL-C-22520 NOW MIL-DTL-22520)
• MIL-T-55619/1 – Tool, Crimping, for Coaxial, Radio Frequency, Connectors (Style 2) (S/S by MIL-C-22520/5)
• MIL-T-82070 – TIRE IRON, TIRE AND RIM SERVICING (NO S/S DOCUMENT)
• MIL-T-83508 – TOOL, SOLDERLESS WRAP, HAND OR POWER ACTUATED, WIRE TERMINATION, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
• MIL-T-83508/1 – TOOL, SOLDERLESS WRAP, HAND OR POWER ACTUATED, WIRE TERMINATION, TYPE 2, FOR WRAPPING (NO S/S DOCUMENT)
• MIL-T-83508/10 – TOOK, SOLDERLESS WRAP, HAND OR POWER ACTUATED, WIRE TERMINATION, TYPES 1, 2, 3, AND 4, (WRAP SLEEVE), FOR WRAPPING (NO S/S DOCUMENT)
• MIL-T-83508/11 – TOOL, SOLDERLESS WRAP, HAND OR POWER ACTUATED, WIRE TERMINATION, TYPES 5, FOR UNWRAPPING (NO S/S DOCUMENT)
• MIL-T-83508/3 – TOOL, SOLDERLESS WRAP, HAND OR POWER ACTUATED, WIRE TERMINATION, TYPE 2, FOR WRAPPING (NO S/S DOCUMENT)
• MIL-T-83508/5 – TOOL, SOLDERLESS WRAP, HAND OR POWER ACTUATED, WIRE TERMINATION, TYPE 1, FOR WRAPPING (NO S/S DOCUMENT)
• MIL-T-83508/7 – TOOL, SOLDERLESS WRAP, HAND OR POWER ACTUATED, WIRE TERMINATION, TYPE 4, FOR WRAPPING (NO S/S DOCUMENT)
• MIL-T-83508/8 – TOOL, SOLDERLESS WRAP, HAND OR POWER ACTUATED, WIRE TERMINATION, TYPE 5, FOR WRAPPING (NO S/S DOCUMENT)
• MIL-T-83508/9 – TOOL, SOLDERLESS WRAP, HAND OR POWER ACTUATED, WIRE TERMINATION, TYPES 1, 2, 3, AND 4, (WRAPPING BITS), FOR WRAPPING (NO S/S DOCUMENT)
• MIL-T-83724 – TOOL, CRIMPING, CONTACT, ELECTRIC CONNECTOR (USE MIL-C-22520)
• MIL-T-9935 – TACKER, LEVER, HAND OPERATED (USE GGG-T-20)
• MIL-V-1615 – VISE, SKI
• MIL-W-10442 – WRENCHES, SPANNER & HYDRANT (S/S BY GGG-W-665)
• MIL-W-10698 – WRENCH, OPEN END, AND WRENCH ASSEMBLY, STAMPED STEEL (S/S BY A-A-59220)
• MIL-W-10812 – WRENCHES, RANGE, FIELD, M&1937
• MIL-W-12307 – WRENCH, VALVE-REMOVING, M1 AND M2
• MIL-W-13124 – WRENCH, TORQUE INDICATING (USE GGG-W-686)
• MIL-W-15674 – WRENCHES, ADJUSTABLE, BOLT AND NUT (S/S BY GGG-W-631)
• MIL-W-17912 – WRENCH, OPEN-END ADJUSTABLE, AND WRENCH, MONKEY, NONSPARKING AND NONMAGNETIC (NO S/S DOCUMENT)
• MIL-W-19288 – WRENCH, BUNG (FOR STEEL DRUMS) (USE GGG-W-644)
• MIL-W-19762 – WRENCH, PIPE, NONSPARKING AND NONMAGNETIC (NO S/S DOCUMENT)
• MIL-W-19928 – WRENCH, BOX, AND OPEN-END, FIXED, NONSPARKING AND NONMAGNETIC (NO S/S DOCUMENT)
• MIL-W-21350 – Wrenches, Rim Nut (Lug), Bung, and Lineman's (Use GGG-W-644)
• MIL-W-23514 – WRENCH, SPANNER, ADJUSTABLE HOOK, NONSPARKING AND NONMAGNETIC (NO S/S DOCUMENT)
• MIL-W-25265 – WRENCH, IGNITER, ROCKET ENGINE, TYPE MC&1
• MIL-W-26101 – WRENCH SET, NONSPARKING
• MIL-W-26497 – WRENCH, TORQUE, SCREWDRIVER TYPE (S/S BY ASME-B107.14M)
• MIL-W-2997 – WRENCH, WATER JACKET DISASSEMBLING
• MIL-W-40145 – WRENCHES, CROWFOOT, SPECIAL (NO S/S DOCUMENT)
• MIL-W-43005 – WRENCH, TORQUE, (PRESET), FOR TUBE FITTINGS 130161
• MIL-W-43105 – WRENCHES, SOCKET, WHEEL STUD NUT, DOUBLE END: AND HANDLES, BAR (NO S/S DOCUMENT)
• MIL-W-470 – WRENCH, GAS&CYLINDER&VALVE AND MANIFOLD&WING&NUT
• MIL-W-7114 – WRENCH, SPARK PLUG ELBOW SQUARE DRIVE (USE GGG-C-1507)
• MIL-W-8982 – Wrenches, Splined, High Strength, Thin Wall, General Specification For
• MIL-W-8982/1 – Wrench, Splined Socket, Square Drive, High Strength, Thin Wall
• MIL-W-8982/2 – Wrench, Box, Splined, High Strength, Thin Wall
• MIL-W-8982/3 – Wrench, Torque Adapter, Splined, Square Drive, High Strength, Thin Wall
• MIL-W-8982/4 – Wrench, Box, Ratcheting, Splined, High Strength, Thin Wall
• MIL-W-8982/5 – Wrench, Universal Socket, Splined, Square Drive, High Strength, Thin Wall
• MIL-W-8982/6 – Wrench, Combination Box & Open End, High Strength, Thin Wall
• MS14035 – BIT, INSTALLING TOOL, CONTACT, ELECTRICAL CONNECTOR, BIT, REMOVAL TOOL, CONTACT, ELECTRICAL CONNECTOR (NO S/S DOCUMENT)
• MS14036 – BIT, INSTALLING TOOL, CONTACT, ELECTRICAL CONNECTOR (NO S/S DOCUMENT)
• MS14037 – CRIMPING TOOL, TERMINAL HAND, ELECTRICAL CONNECTOR CONTACT, CLASS 1 (USE MIL-C-22520/4)
• MS14166 – T-Wrench, URT-33 Radio Beacon (No S/S Document)
• MS15010 – WRENCH FOR MILITARY STANDARD CUTTING TORCH
• MS15218 – SCREWDRIVER, FLAT TIP, CABINET STRAIGHT SIDES, PLASTIC HANDLE, PLAIN
• MS15219 – SCREWDRIVER, FLAT TIP, COMMON, FLARED SIDES, PLASTIC HANDLE, DESIGN A, SHAPE A
• MS15220 – SCREWDRIVER, FLAT TIP, EXTRA HEAVY DUTY, STEEL HANDLE WITH WOOD INSERTS