FSC-4710: Pipe, Tube and Rigid Tubing

Documents

• ASTM-B640 – Tube, Welded Copper for Air Conditioning and Refrigeration Service (No S/S Document)
• ASTM-B643 – TUBE, SEAMLESS, COPPER-BERYLLIUM ALLOY, STANDARD SPECIFICATION FOR
• ASTM-B68 – COPPER TUBE, SEAMLESS, BRIGHT ANNEALED, SEAMLESS
• ASTM-B732 – Copper Tubing Systems, Evaluating the Corrosivity of Solder Fluxes for (S/S by ASTM-B813)
• ASTM-B745-B745M – Aluminum Pipe, Corrugated, for Sewers and Drains (No S/S Document)
• ASTM-B75 – Tube, Seamless Copper
• ASTM-B75M – Tube, Seamless Copper (Metric)
• ASTM-B813 – Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tubes
• ASTM-B861 – Titanium and Titanium Alloy Seamless Pipe
• ASTM-B862 – Titanium and Titanium Alloy Welded Pipe
• ASTM-B88 – Tube, Water, Seamless Copper
• ASTM-B88M – Tube, Seamless Copper Water, (Metric)
• ASTM-C1053 – Pipe, Borosilicate Glass, and Fittings for Drain, Waste, and Vent (DWV) Applications (No S/S Document)
• ASTM-D1527 – PIPE, PLASTIC, ACRYLONITRILE-BUTADIENE-STYRENE (ABS) SCHEDULES 40 & 80 (NO S/S DOCUMENT)
• ASTM-D1598 – Pipe, Plastic, Under Constant Internal Pressure, Time-to-Failure of (No S/S Document)
• ASTM-D1599 – Pipe, Plastic, Tubing, and Fittings, Resistance to Short-Time Hydraulic Pressure of
• ASTM-D1785 – Pipe, Plastic, Poly(Vinyl Chloride) (PVC), Schedules 40, 80, and 120
• ASTM-D1927 – SHEET, PLASTIC, RIGID POLY (VINYL CHLORIDE), STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)
• ASTM-D2104 – Polyethylene (PE) Plastic Pipe, Schedule 40 (No S/S Document)
• ASTM-D2105 – PIPE AND TUBE, LONGITUDINAL TENSILE PROPERTIES OF "FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) (NO S/S DOCUMENT)
• ASTM-D2152 – Pipe and Molded Fittings by Acetone Immersion, Adequacy of Fusion of Extruded Poly(Vinyl Chloride)(PVC)(No S/S Document)
• ASTM-D2235 – Pipe and Fittings, Plastic, Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) (No S/S Document)
• ASTM-D2239 – Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
• ASTM-D2241 – Pipe, Poly (Vinyl Chloride) (PVC) Pressure-Rated, (SDR Series)
• ASTM-D2282 – PIPE, PLASTIC (SDR-PR), ACRYLONITRILE-BUTADIENE-STYRENE (ABS) (NO S/S DOCUMENT)
• ASTM-D2310 – Pipe, Machine-Made "Fiberglass" Glass-Fiber-Reinforced Thermosetting-Resin
• ASTM-D2412 – Pipe, Plastic, by Parallel-Plate Loading, Determination of External Loading Characteristics of
• ASTM-D2444 – Pipe and Fittings, Thermoplastic, by Means of a Tup (Falling Weight), Determination of the Impact Resistance of
• ASTM-D2447 – Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (No S/S Document)
• ASTM-D2513 – Gas, Thermoplastic, Pressure Pipe, Tubing, and Fittings (No S/S Document)
• ASTM-D2517 – Epoxy Resin, Reinforced Gas Pressure Pipe and Fittings
• ASTM-D2661 – Plastic Drain, Waste, and Vent Pipe and Fittings, Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic
• ASTM-D2662 – PIPE, POLYBUTYLENE (PB) PLASTIC, (SIDR-PR) BASED ON CONTROLLED INSIDE DIAMETER (NO S/S DOCUMENT)
• ASTM-D2665 – Plastic Drain, Waste, and Vent Pipe and Fittings, Poly (Vinyl Chloride) (PVC)
• ASTM-D2666 – TUBING, POLYBUTYLENE (PB) PLASTIC (NO S/S DOCUMENT)
• ASTM-D2672 – Joints for IPS PVC Pipes Using Solvent Cement
• ASTM-D2680 – SEWER PIPING, COMPOSITE, ACRYLONITRILE-BUTADIENE-STYRENE (ABS) AND POLY(VINYL CHLORIDE) (PVC) (NO S/S DOCUMENT)
• ASTM-D2737 – Polyethylene (PE) Plastic Tubing
• ASTM-D2740 – TUBING, POLY(VINYL CHLORIDE) (PVC) PLASTIC, STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)
• ASTM-D2751 – Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (No S/S Document)
• ASTM-D2774 – Piping, Thermoplastic Pressure, Underground Installation of , Standard Recommended Practice for (No S/S Document)
• ASTM-D2837 – Pipe Materials, Thermoplastic, Obtaining Hydrostatic Design Basis for, or Pressure Design Basis for Thermoplastic Pipe Products (No S/S Document)
• ASTM-D2846-D2846M – Plastic Hot - and Cold-Water Distribution Systems, Chlorinated Poly (Vinyl Chloride) (CPVC)
• ASTM-D2852 – Pipe and Fittings, Plastic Drain, Styrene-Rubber (SR)
• ASTM-D2949 – Drain, Plastic, Waste, and Vent Pipe and Fittings, 3.25-in. Outside Diameter Poly(Vinyl Chloride (PVC) (No S/S Document)
• ASTM-D2992 – PIPE AND FITTINGS, OBTAINING HYDROSTATIC OR PRESSURE DESIGN BASIS FOR "FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) (NO S/S DOCUMENT)
• ASTM-D2996 – PIPE, FILAMENT-WOUND FIBERGLASS (GLASS-FIBER-REINFORCED THERMOSETTING RESIN) (NO S/S DOCUMENT)
• ASTM-D2997 – PIPE, CENTRIFUGALLY CAST "FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) (NO S/S DOCUMENT)
• ASTM-D3000 – PIPE, PLASTIC, POLYBUTYLENE (PB), (SDR-PR) BASED ON OUTSIDE DIAMETER (NO S/S DOCUMENT)
• ASTM-D3033 – SEWER PIPE & FITTINGS, TYPE PSP POLY (VINVL CHLORIDE) (PVC) - 29 MAR 1985 (REFER TO ASTM D3034)
• ASTM-D3034 – Sewer Pipe and Fittings, Type PSM Poly (Vinyl Chloride) (PVC)
• ASTM-D3035 – Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter (No S/S Document)
• ASTM-D3138 – Cements, Solvent, for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Non-Pressure Piping Components
• ASTM-D3212 – Joints for Drain and Sewer Plastic Pipes using Flexible Elastomeric Seals
• ASTM-D3298 – PIPE, PLASTIC DRAIN, PERFORATED STYRENE RUBBER (SR) (NO S/S DOCUMENT)
• ASTM-D3309 – Systems, Hot- and Cold-Water Distribution, Polybutylene (PB) Plastic (No S/S Document)
• ASTM-D3517 – Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
• ASTM-D3567 – Pipe and Fittings, "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin), Determining Dimensions of
• ASTM-D3839 – Pipe, Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Underground Installation of
• ASTM-E215 – Equipment, Standardizing, for Electromagnetic Examination of Seamless Aluminum-Alloy Tube
• ASTM-E243 – Copper and Copper-Alloy Tubes, Electromagnetic (Eddy-Current) Examination of
• ASTM-E309 – Eddy-Current Examination of Steel Tubular Products using Magnetic Saturation
• ASTM-E426 – Products, Tubular, Titanium, Austenitic Stainless Steel and Similar Alloys, Seamless and Welded, Electromagnetic (Eddy-Current) Examination of
• ASTM-E570 – Flux Leakage Examination of Ferromagnetic Steel Tubular Products
• ASTM-F402 – Pipe and Fittings, Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic
• ASTM-F409 – Tube and Tubular Fittings, Thermoplastic Accessible and Replaceable Plastic
• ASTM-F412 – Plastic Piping Systems
• ASTM-F441-F441M – Plastic Pipe, Schedules 40 and 80, Chlorinated Poly(Vinyl Chloride) (CPVC)
• ASTM-F442-F442M – Plastic Pipe (SDR-PR), Chlorinated Poly (Vinyl Chloride) (CPVC)
• ASTM-F480 – Well Casing Pipe and Couplings, Thermoplastic Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
• AWWA-C106 – CAST IRON PIPE, CENTRIFUGALLY CAST IN METAL MOLDS, FOR WATER OR OTHER LIQUIDS - 9 MAY 80
• AWWA-C111 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
• AWWA-C115 – Flanged Ductile Iron Pipe with Threaded Flanges - 1 SEP 1988 AWWA C-115 must be Used in Conjunction with AWWA C-110, C-111and C-151
• AWWA-C151 – Pipe, Ductile-Iron, Centrifugally Cast, for Water or Other Liquids
• AWWA-C200 – STEEL WATER PIPE--6 IN. AND LARGER (NO S/S DOCUMENT)
• AWWA-C206 – PIPE, STEEL, WATER, FIELD WELDING (NO S/S DOCUMENT)
• AWWA-C214 – TAPE COATING SYSTEMS FOR THE EXTERIOR OF STEEL WATER PIPELINES (NO S/S DOCUMENT)
• AWWA-C600 – WATER MAIN, DUCTILE IRON, AND THEIR APPURTENANCES, INSTALLATION OF (NO S/S DOCUMENT)
• AWWA-C900 – PIPE, PRESSURE, 4 IN. THROUGH 12 IN., FOR WATER, POLYVINYL CHLORIDE (PVC) (NO S/S DOCUMENT)
• AWWA-M11 – STEEL PIPE - A GUIDE FOR DESIGN AND INSTALLATION (NO S/S DOCUMENT)
• AWWA-M23 – PIPE, PVC - DESIGN AND INSTALLATION (NO S/S DOCUMENT)
• DOD-STD-2187 – Chemical Cleaning of Salt Water Piping Systems (Metric) (No S/S Document)
• FED-STD-183 – CONTINUOUS IDENTIFICATION MARKING OF IRON AND STEEL PRODUCTS (SEE NOTICE 3 FOR REPLACEMENT INFORMATION)
• FED-STD-48 – Tolerances for Steel Wrought Products, and for Centrifugally Cast Steel (See Notice of Cancellation for Replacement Information)
• ISO8535/1 – Diesel Engines - Steel Tubes for High-Pressure Fuel Injection Pipes - Part 1: Requirements for Seamless Cold-Drawn Single-Wall Tubes
• L-P-00315/(the base document for this interim revision is L-P-315C(2) NOT 1) – Pipe and Tubing, Nonmetallic (Plastic) (S/S by ASTM-D2239 and ASTM-D3309)
• L-P-00545 – Plastic Tubing (Polyethylene, Flexible) (S/S by L-P-315)
• L-P-315/(an interim revision also exists for this document number as L-P-00315D NOT 1) – Pipe, Plastic (Polyethylene, PE, SDR-PR) (S/S by ASTM-D3309 and ASTM-D2239)
• L-P-320 – Pipe and Fittings, Plastic (Polyvinyl Chloride, PVC, Drain, Waste and Vent, DWV) (S/S by ASTM-D2665)
• L-P-322 – Pipe and Fitting, Plastic (Acrylonitril-Butadiene-Styrene, (Abs, Drain, Waste, and Vent, DWV) (No S/S Document)
• MIL-B-13492 – Brass, Leaded, Tubing, Seamless
• MIL-C-18159 – Chemical Cleaning of Salt Water Piping Systems (Contents of SPEC have been Incorp into MIL-STD-2187)
• MIL-DTL-15119 – Tubing, Round, Seamless Alloy Steel
• MIL-DTL-23226 – Tube and Pipe, Corrosion Resistant Steel, Seamless (UNS S30400, S30403, S30400/S30403, S31600/S31603, S31703, S34700, and S34800)
• MIL-DTL-23227 – Tube and Pipe, Nickel-Chromium-Iron Alloy (UNS N06600)
• MIL-DTL-23520 – Tube and Pipe, Nickel-Copper Alloy, Seamless, Air Melted (UNS N04400)
• MIL-DTL-24803 – Nickel-Chromium-Iron Alloy Tube Reduced Extrusions (UNS N06690)
• MIL-DTL-25995 – Pipe, Aluminum Alloy, Drawn or Extruded
• MIL-DTL-32386 – Nickel-Chromium-Molybdenum-Niobium Alloy, Seamless Pipe (UNS N06625)
• MIL-DTL-32669 – Tube and Pipe, Nickel-Chromium-Iron Alloy, Seamless (UNS N06690)