FSC-34GP
FSC-34GP
Documents
- AGMA2000 – Gear Classification and Inspection Handbook Tolerances and Measuring Methods for Unassembled Spur and Helical Gears (Including Metric Equivalents) (See Notice for Replacement Information)
- AGMA2001 – Gear Teeth, Involute Spur and Helical, Fundamental Rating Factors and Calculation Methods for
- AGMA218.01 – Gear Teeth, Spur and Helical Involute, AGMA Standard for Rating the Pitting Resistance and Bending Strength of (S/S by AGMA2001 and AGMA908)
- AGMA390.03 – Gear Handbook - Gear Classification, Materials and Measuring Methods for Bevel, Hypoid, Fine Pitch Wormgearing and Racks only as Unassembled Gears (S/S by AGMA2009 and AGMA 2011)
- AGMA6019 – Gearmotors using Spur, Helical, Herringbone, Straight Bevel, or Spiral Bevel Gears, Standard for (No S/S Document)
- ANSI-B11.1 – Machine Tools-Mechanical Power Presses Safety Requirements for Construction, Care, and Use (No S/S Document)
- ANSI-B11.3 – Machine Tools - Power Press Brakes - Safety Requirements for Construction, Care, Use (No S/S Document)
- ANSI-B11.4 – Safety requirements for Shears
- ANSI-B11.6 – Safety Requirements for Manual Turning Machines (Lathes) with or without Automatic Control
- ANSI-B11.8 – Safety Requirements for Manual Milling, Drilling and Boring Machines with or without Automatic Control
- ANSI-B11.9 – Machine Tools – Safety Requirements for Grinding Machines
- ANSI-B5.10 – TAPERS, MACHINE, SELF HOLDING AND STEEP TAPER SERIES (REPLACED BY ASME-B5.10)
- ANSI-B5.16 – LATHES, ENGINE & TOOL ROOM, ACCURACY OF (NO S/S DOCUMENT)
- ANSI-B5.18 – Milling Machines, Spindle Noses and Tool Shanks for
- ANSI-B5.35 – Discs, Abrasive and Plate Mounted Wheels, Machine Mounting Specification for (S/S by ASME-B5.35)
- ANSI-B5.40 – Spindle Noses and Tool Shanks for, Horizontal Boring Machines (No S/S Document)
- ANSI-B5.51M – PREFERRED SI UNITS FOR MACHINE TOOLS (NO S/S DOCUMENT)
- ANSI-B5.8 – Chucks and Chuck Jaws (No S/S Document)
- ANSI-B5.9 – Spindle Noses for Tool Room Lathes, Engine Lathes, Turret Lathes, and Automatic Lathes (No S/S Document)
- ANSI-B6.1 – GEARS, SPUR, COARSE-PITCH INVOLUTE, TOOTH PROPORTIONS FOR (NO S/S DOCUMENT)
- ANSI-B7.1 – Abrasive Wheels, Use, Care and Protection of, Safety Codes for the
- ANSI-B74.12 – Specifications for the Size of Abrasive Grain Grinding Wheels, Polishing and General Industrial Uses
- ANSI-B74.13 – Grinding Wheels and Other Bonded Abrasives, Marking for Identifying (Replaced with CAMI-B74.13)
- ANSI-B74.2 – Grinding Wheels, Shape and Sizes of, Mounted Wheels, Sizes and Identification of, Specification for
- ANSI-B74.3 – Diamond or CBN Abrasive Products, Shape and Sizes of, Specification for (No S/S Document)
- ANSI-B92.1 – Involute Splines and Inspection (No S/S Document)
- ANSI-B93.114M – MACHINERY, INDUSTRIAL, PNEUMATIC FLUID POWER - SYSTEM STANDARD FOR (NO S/S DOCUMENT)
- ANSI-C1 – ORDER NFPA 70-78
- ANSI-C113.1 – ORDER NFPA 79-77
- ANSI-MC96.1 – Thermocouples, Temperature Measurement (No S/S Document)
- ANSI-O1.1 – Machinery, Woodworking, Safety Requirements for
- ANSI-Z55.1 – INDUSTRIAL APPARATUS AND EQUIPMENT, GRAY FINISHES FOR - 1973
- ASME-B5.10 – Machine Tapers (Self Holding and Steep Taper Series)
- ASME-B5.1M – T-Slots, Their Bolts, Nuts, and Tongues
- ASME-B5.50 – Tool, V Flange Shanks for Machining Centers with Automatic Tool Changers (No S/S Document)
- AWS-A4.0 – WELDS, STANDARD MECHANICAL TESTING - 42
- AWS-A6.1 – GAS SHIELDING ARC WELDING, SAFE PRACTICE FOR (NO S/S DOCUMENT)
- AWS-A6.3 – PLASMA ARC CUTTING, SAFE PRACTICES FOR (NO S/S DOCUMENT)
- AWS-B3.0 – PROCEDURES, STANDARD QUALIFICATION (NO S/S DOCUMENT)
- AWS-Z49.1 – Welding, Cutting, and Allied Processes, Safety in
- CAMI-B74.13 – Markings for Identifying Grinding Wheels and Other Bonded Abrasives
- CGA-E1 – Rubber Welding Hose and Hose Connections for Gas Welding, Cutting, and Allied Processes
- EIA494 – 32 Bit Binary CL (BCL) and 7 Bit ASCII CL (ACL) Exchange Input Format for Numerically Controlled Machines (No S/S Document)
- EIA-RS227 – Tape, Perforated, One Inch (No S/S Document)
- EIA-RS232 – Data Terminal Equipment and Data Communication Equipment, Interface Between, Employing Serial Binary Data Interchange (No S/S Document)
- EIA-RS244 – CHARACTER CODE FOR NUMERICAL MACHINE CONTROL PERFORATED TAPE (NO S/S DOCUMENT)
- EIA-RS267 – Machines, Numerically Controlled, Axis and Motion Nomenclature for (No S/S Document)
- EIA-RS274 – Machines, Numerically Controlled, Interchangeable Perforated Tape Variable Block Format for Contouring and Contouring/Positioning (No S/S Document)
- EIA-RS281 – MACHINE, NUMERICAL, CONTROL, ELECTRICAL & CONSTRUCTION STANDARDS FOR - 1979
- EIA-RS358 – Subset of USA Standard Code for Information Interchange for Numerical Control Perforated Tape (No S/S Document)
- GGG-D-645 – DRILL CHUCKS AND CHECK KEYS (USE GGG-C-350)
- ISO1122/1 – Vocabulary of Gear Terms- Part 1: Definitions Related to Geometrical Definitions
- ISO54 – Cylindrical Gears for General Engineering and for Heavy Engineering-Modules
- JIC-EMP-1-EGP-1 – ELECTRICAL STANDARDS FOR MASS PRODUCTION EQUIPMENT/ELECTRICAL STANDARDS FOR GENERAL PURPOSE MACHINE TOOLS - 1967 (NO S/S DOCUMENT)
- MIL-C-4087 – Color Conditioning of Machinery and Shop Equipment, General Specification for
- MIL-DTL-32631 – Hot Isostatic Pressure Diffusion Bonded Parts for Special Applications
- MIL-HDBK-702 – Engineering Practices Productivity Enhancement of Industrial Plant Equipment and Production Support Systems
- MIL-W-12683 – WELDING, JOINT DESIGNS, DATA FOR STRUCTURES OTHER THAN ARMOR (USE MIL-STD-22)
- MIL-W-27664 – WELDING, SPOT, INERT-GAS SHIELDED ARC (NO S/S DOCUMENT)
- NEMA-EW6 – Guidelines for Precautionary Label for Arc-Welding and Cutting Products (No S/S Document)
- NEMA-ICS1 – Industrial Control and Systems, General Standards for
- NEMA-ICS2 – Industrial Control and Systems: Controllers, Contactors, and Overload Relays Rated 600 Volts
- NEMA-ICS3 – Industrial Control and Systems: Medium Voltage Controllers Rated 2001 to 7200 Volts AC
- NEMA-ICS5 – RESISTANCE WELDING CONTROL - 1978
- NEMA-ICS6 – Enclosures for Industrial Controls and Systems
- NEMA-ICS9 – TABLE OF CONTENTS, DETAILED, FOR THE STANDARDS PUBLICATIONS OF THE INDUSTRIAL CONTROL AND SYSTEMS SECTION - 78
- NEMA-MG1 – Motors and Generators
- NEMA-MG7 – MOTION/POSITION CONTROL MOTORS, CONTROLS, AND FEEDBACK DEVICES (NO S/S DOCUMENT)
- NFPA70 – National Electrical Code
- NFPA79 – Machinery, Industrial, Electrical Standard for
- NFPA-T2.24.1 – Hydraulic Fluid Power-Systems Standard for Stationary Industrial Machinery (No S/S Document)
- RMA-IP7 – Rubber Welding Hose, Specifications for (No S/S Document)
- SAE-J712 – Industrial and Agricultural Disc Wheels
- UL123 – Torches, Oxy-Fuel Gas
- UL147 – Torches, Hand-Held, for Fuel Gases
- UL252 – Regulators, Compressed Gas
- UL499 – Appliances, Electric Heating